Get complete information related to latest Dump Valve Spares Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Dump Valve Spares Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Dump Valve Spares Tenders.
Tender For corrigendum : supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white,
Tender For supply of ncm2514012 swagelok make spares - needle valve-ss-1rs4 , male connector, 1/2in,od x 1/2in,npt(m) , male connector ss316 1/8"odx1/8"npt(m) with nut ferrule , ss nut - 1/4" od, p/n:ss-402-1 , ss union elbow - 1/8" od, p/n:ss-200-9 , tee,ref:ss-400-3,make:swagelok , union tee,1/2in, od, ss-810-3,ss316 , ss tube cap 1/4" od (ss-400-c) , ss ferrule set - 1/4" od front + back ferrule (each 10) p/n:ss-400-set , ss ferrule set - 1/8" od front + back ferrule (each 10) p/n:ss-200-set , ss tube plug - 1/8" od, p/n:ss-200-p , ss reducing union 3/8" od x 1/4" od p/n:ss-600-6-4 , filter element,fseries,1/4in,pore7,p/n-ss-4f-k4-7 , tee filter 1/4" swg ss316 guard 7 micron ss element p/n ss-4tf-7 , needle valve swagelok 1/2" swg, ss316 p/n ss-1rs8 , ss tf series t type filter 1/4in od, 2 microns model no:ss-4tf-2 make:swagelok , inline filter swagelok 1/4" swg ss316 guard 2 micronp/n ss-4f-2 , ss 40g series 2 - way ball valve with modified ptfepacking, 1/4" od ends, p/n:ss- 42gs4 , stainless steel 3-piece 60 series ball valve, reinforce in. swagelok tube fitting , 1/8" ball valve (ss-2mg-sl), metering valve , ss-45s8,ss 40 series 2 way ball valve 1/2" od swagelok , snoop, leak detector, ms-snoop-80z , check valve swagelok, p/n: ss-8c-1/3 (nrv 1/2 inch) , pressure regulator, ss316,alloy x-750 diaphragm , i/l press- 248bar, o/l-0-17bar, pctfe seat material make/model- swagelok/kcy1grf412a20030 , ss f series inline filter, 1/4" od, 7 microns (ss-4f-7) , ball valve ,p/n:ms-133-sr,133 series pneumatic, spring-return actuator, make :swagelok , variable area flow meter,g1 model, flow range:10 to 100 air l/h make:swagelok model : vaf-g1-06m-1-0 , variable area flow meter, g1 model, flow range: 4 to 40 air l/h make:swagelok model : vaf-g1-04m-1-0 , variable area flow meter,g1 model, flow range:1.6 to 16 air l/h make:swagelok model : vaf-g1-03m-1-0 , industrial pressure gauge, b model 63mm dial size 0-250 bar gauge pressure make:swagelok model: pgi-63b-bg250-laox , industrial pressure gauge, b model 63mm dial size 0-25bar gauge pressure make:swagelok model: pgi-63b-bg25-laox , tubing 1/16" od p/n tht-3r60-1.59-0.36 sstubing-1/16"odx0.014"wt make:swagelok model : ss-t1-s-014-6me , element kit,15 micron, swagelok, ss-4f-k4-15 ,
Tender For supply of laboratory misc or consumables - acid gloves double dip pvc , bench protector vinyl 30to35x455to465cm , blotting sheet ordinary , blotting sheet ordinary non-absorbent , bottle top dispenser 0point25to2point5ml , bottle top dispenser 5to50ml , bottle top dispenser 20to100ml , brush for cleaning beaker , brush for cleaning bottle , brush for cleaning weigh machine small , bubbler 1to2ml , bubbler natural rubber 5ml , bubbler natural rubber 10ml , bubbler natural rubber 20ml , pipette filler rubber bulb with 3 pinch valve upto 500ml , butter paper , cotton roll absorbent 500g , cotton roll nonabsorbent 500gm , crucible silica 15ml , crucible with lid silica 16ml , crucible silica 25ml , crucible with lid silica 26ml , cryogenic labels 1point3to1point5x 0point6 to0point8 inch , cryogenic labels ss 1point1to1point3x0point4to0point6inch , forceps blunt ss 6inch , forceps blunt ss 8inch , forceps blunt ss 12inch , forceps pointed ss 6inch , forceps ss 8inch , forceps ss 12inch , hand protector grip silicon rubber , heat resistant gloves kevlar 480mm overall length width palm 135mm , heat resistant plates ceramic 151x150mm , ice cube pouch 15to25ml ice cubes , inoculating metal loop with holder metal loop holder nichrome wire 200mm length of holder 2point5mm in dia of loop and 50mm wire length , inoculating metal wire straight with holder metal loop holder nichrome wire 200mm length of holder 40to50mm wire length , inoculating needle 120to150mm length , label 20to30x10to15mm , label freeze tag 12point7mm dots , label freeze tag 25x13mm , label freeze tag 3by4inch 10 meter , labelling tape multipurpose 3by4inch 10 meter , magnetic bead retriever ptfe 30cm , magnetic beads cross spin ptfe 19x19mm , magnetic beads cross spin ptfe 25x25mm , magnetic beads cross spin ptfe 32x32mm , magnetic beads cross spin ptfe 9point5x30mm , magnetic beads round bar with pivot ring ptfe 9point5x40mm , magnetic beads round bar with pivot ring ptfe 9point5x50mm , magnetic beads round bar with pivot ring ptfe 9point5x65mm , magnetic beads round bar with pivot ring ptfe 12point7x38mm , magnetic beads round bar with pivot ring ptfe 12point7x76mm , n95 mask 5 layer filtration membrane technology , mask facial medical 16to18x8to10cm , mortar and pestle with spout porcelain capacity 100ml , mortar and pestle with spout porcelain capacity 1500ml , mortar and pestle with spout porcelain capacity 2000ml , nitrile hand gloves blue nitrile thickness 4mil palm , para film roll 45to55 mmper70to80 meter , para film roll 95to105mmper70to80 meter , petri plate carrier 95to105mmper70to80 meter , petri plate compartment stand ss 5to6 plates , petri plate compartment stand ss 14to18 plates , petri plate rack pp or epoxy coated steel wire , petri seal 10to15mmx 30to35 mper0point5inchx100to120inch , rack thermo conductive metal alloy 1point5ml microtube min 24 places , rackorstand test tube metal alloy 0point2ml 96 places for pcr plate , rackorstand test tube aluminium minimum 12 places 15 mm dia autoclavable , rackorstand test tube aluminium minimum 12 places 25mm dia autoclavable , rackorstand test tube aluminium minimum 24 places 15 mm dia autoclavable , rackorstand test tube aluminium minimum 24 places 25mm dia autoclavable , rackorstand test tube aluminium minimum 36 places 15mm dia autoclavable , scissors surgical aluminium minimum 36 places 25mm dia autoclavable , spatula ss 95to105 mm length , spatula ss 145to155 mm length , spatula ss 195to205 mm length , stand for burette with clamp ss for 25ml burette , stand for burette with clamp ss for 50ml burette , stand for burette with clamp ss for 100ml burette , stand for burette with clamp ss for 125ml funnel , stand for separating funnel ss for 150ml funnel , stand for cod tube ss for min 20plus tube capacity , stand for kjeldahl tube ss for min 20plus tube capacity , stand for separating funnel ss for 500ml funnel , stand tripod ss 200mm height , stand tripod circular ss 200mm height , steam indicator tape 0po
Tender For corrigendum : supply of elbow pipe fitting (q4) , commercial upvc fittings (q3) , pvc end cap (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , commercial cpvc pipe fittings (q3) , steel pipe flanges as per is 6392 (q3)
Tender For bid to ras supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , commercial cpvc pipe fittings (q3) , unplasticized pvc pipes for potable water supplies as per is 4985 (q3)
Tender For bid to ras corrigendum : custom bid for services - pdm1b24334 agency for hydro testing and ibr liaison during repair maintenance schedule testing of boilers hrsg ibr exchanger ibr vessels and other ibr equipment for power plant and other units of refinery during normal operation and shutdown-1) carbon steel piping for hydrocarbon services (with welding electrode e-6010 / e-7018) - units transportation of all piping items from owner's storage points to work site and / or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawing etc., threading, laying, erection and alignment of pipes upto a height of 5 meters on sleepers, pipe racks etc. or upto 5 meters depth in trenches, anchoring wherever required, connecting with equipment, nozzles, steam traps, strainers, orifice assemblies (including tapping upto first block valve), spray nozzles, rotameters; tapping for instrument connections like pressure gauges, thermowells, sample connections, vents, drains etc. including fixing of all types of sw valves, gaskets, nuts and bolts, all inline instruments, elbows, tees, flanges, reducers, full coupling or half coupling, reinforcement pads, earthing strip wherever required; welding prefabricated shoes and supports (including alignment) as per the drawings including preparation of small bore isometrics upto 1.5 inch nb, specifications, codes etc. and as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, flushing wherever required, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge., 2) provision of reinforcement pad (with welding electrode e-6010 / e-7018) transportation from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, gri nding, edge preparation as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, pneumatic testing, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge. 3) extra for ibr grade carbon steel piping joints. for ibr piping jobs, the scope of contractor shall be liasoning with ibr authorities including approval of drawings / documents from ibr authorities and also getting the final approval of the job from ibr authorities including payment of any fee or charges to ibr authorities for this purpose (20% of joints). 4) alloy steel piping (astm a335 gr. p22) units- transportation of all piping items from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawings etc. (alloy steel joints shall be welded by doing root run using tig welding followed by filler passes by manual / semi-automatic arc welding. the job is to be pre-heated prior to welding and all joints to be stress relieved and fully radiographed
Tender For corrigendum : supply of waste pipe,waste pipe,stainless steel shelf rack,towel rail / ring for bathroom,towel rail / ring for bathroom,towel rail / ring for bathroom,plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest),european pattern toilet seat vitreous china,connection pipe with nuts (v2),connection pipe with nuts (v2),connection pipe with nuts (v2),sinks,bathroom or toilet mirror (v2),bathroom or toilet mirror (v2),copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703,wire mesh fabric or cloth (v2) as per is 1568,wire mesh fabric or cloth (v2) as per is 1568,sinks / wash basins - vitreous china as per is 2556 (part 4),towel rail / ring for bathroom,towel rail / ri