Tender For supply of lifting hydraulic jack for ctrb puller cum trolley. part no: sepl/hlc/100-70 t, model: sepl-70-100. make: sumanglam equipment pvt. ltd. [ warranty period: 12 months after the date of delivery ] ]
Tender For (1) design, manufacture, supply, erection, testing and commissioning of 5 ton eot crane for extension of wheelset stacking area of assembly as per rwf technical specification no.rwf/m&p/assy/2025/5 t eot crane enclosed. (2) maintenance spares as per schedule-iv and additional spares and items viz. slings / lifting tackles as per schedule-i of specification. (3) any other essential spares for two years normal maintenance to cover the complete range of mechanical, hydraulic and electrical equipment as per clause 1.3 of specification. (4) maintenance tools as per schedule v of specification. (5) any other accessory treated asconcomitant accessory. ]
Tender For bid to ras corrigendum : providing of goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; open body lcv truck; 19 ft lcv,goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; open body lcv truck; 19 ft lcv,goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; open body lcv truck; 19 ft lcv,goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; open body lcv truck; 15 ton truck,goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; open body lcv truck; 15 ton truck,goods transport service – per km based service - household/office, vehicles, machinery & equipment, dangerous/hazardous; recovery vehicle; recovery vehicle with pulling capacity 7 ton and lifting capacity 5 ton
Tender For bid to ras providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; jcb,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; tractor with trolley,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; tractor with grass cutter,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; tipper 9 ton,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; crane lifting capacity 12 ton,hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; earth moving equipment; crane lifting capacity 15 ton
Tender For bid to ras corrigendum : providing of custom bid for services - rate contract for magnetic flux leakage testing for assessment of steel wire ropes of lifting appliances and equipment onboard in ships and yard crafts at nsry (kar)
Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op
Tender For supply of permanent magnetic yoke (rope type) to carryout magnetic particle testing (wet and dry method) as per. is: 3703/2004.the technical specification is given below; 1) lifting power : 20kg or more with pole spacing 100mm.2)magnetic field: constant level.3)poles adjustment : 0-300mm. 4)tangential field strength :minimum value of 30g.5)equipment weighs not more than 400grams.. note: item to be supplied along with calibration, test certificate and warranty certificate and equipment manual. as per specification is: 3703/2004(copy enclosed) or latest make: orion/ferflux/ecci/magnaflux/pic /sims or equivalent [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; tender for the job of obtaining consent to establish for hter scheme at rcf thal unit through nipl route; as per scope of work; a) safety violation by contractor employee at work place: 1) working without wearing safety helmet (per person), 2) working without wearing safety shoes (per person), 3) working without wearing safety goggle &/or hand gloves during handling of hazardous chemicals, acid/alkali etc. (per person), 4) working without wearing safety belt (double lanyard full body harness) for height jobs above 2 meters. (per person), 5) working without wearing face shield during cutting, welding, grinding activity and during maintenance work on process lines and equipment. (per person), 6) not using ppe, tools/tackles as mentioned in safety work permit (per person), 7) working without valid test certificate for lifting tools/tackles (per incidence observation), 8) working without appropriate electric plug-pin, elcb/rccb/rcbo (per incidence observation), 9) working without a valid safety work permit (per incidence/ observation), 10) permit not available at site (per incidence/observation), 11) gas cylinder without flash back arrestor (per incidence observation), 12) gas cutting set with damaged hose pressure gauge without valve key (per incidence/observation), 13) gas cylinder without trolley (filled and empty) (per incidence/ observation), 14) unauthorized personal entering into cordon off area (per incidence/observation), 15) faulty wire/cable laying on ground or using snapped cables (per incidence/observation)., 16) improper hand tool or power tools (per incidence observation), 17) smoking at work place area. (per person), 18) found in intoxicated state (per person), 19) violation of road rules (per incidence observation), 20) b) safety violations by transport contractors, 21) faulty hazchem displayed on tanker (per incidence observation), 22) one pvc/tychem suit set if available (per incidence/ observation), 23) both pvc/tychem suit set are not available (per incidence observation), 24) fire extinguisher without hydro test. (per incidence/ observation), 25) trem card not available (per incidence/observation), 26) hazardous chemicals transportation training of driver by authorized agencies. (training card not available with driver) (per person), 27) lying/resting below the vehicle(per incidence/observation), 28) any other deviation found as per checklist for tankers (per incidence/ observation.
Tender For electric tugs for moving material in trolley (1 ton capacity) as per reference letter sl.no-6 and vb allocation no-p4275 4 000 502vb 006 000 specification; required equipment material handling truck lifting capacity -1000 kg model name/number- t1000 material- mild steel dimensions -440(l) x756(w) x1056(h) mm power supply -300w weight -57 kg voltage -24 v maximum speed -5 km/h battery -22 ah(it has a built-in agm battery, which can be charged using its internal charging system. view less details color -black and green required features unique exchangeable and fully customizable hook system. so whatever cart you have, we have a hook that fits. make; josts, movexx or equivalent [ warranty period: 30 months after the date of delivery ] ]