Latest dust ash Tenders | Government dust ash Tenders

State Government

CTN :45312948

28 May, 2026 14.64 Lacs

Multi City - Telangana

Tender For tggenco-ytps(5x800mw)-bop/ahp-unit-1- carrying out of mechanical maintenance of wet ash handling system including preventive, periodical, emergency and breakdown maintenance and house keeping of the wet ash handling handling system of ahp, unit-1/stage-i/ytps for the period of 3 months from 01.06.2026 or actual date of commencement of work for the fy 2026-27 or till finalization of annual maintenance contract at headquarters whichever is earlier.

State Government

CTN :45299494

15 Jun, 2026 NA

Multi City - Telangana

Tender For tggenco-ktps-vii stage-cam-enquiry for supply of shaft sleeves for clinker grinders in wet ash handling system

State Government

CTN :45270000

06 Jun, 2026 2.55 Lacs

Multi City - Telangana

Tender For ktps-v stage- cam- transportation of fly ash and wet ash from various locations esp hoppers of unit x 56 nos in ash handling system by means of manual loading and disposing to ash pond or low laying areas in ktps complex with lead distance of 3 km approx with tractors trucks including leads safety measures like nose masks jaggery etc for supervisors and drivers loading labour etc. to complete for finished item of work and as instructed by the engineer in charge of the work during unit x overhaul for the f.y 2026 27-reg

CTN :45305466

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of sprocket wheels and drive gears for cg required for wet ash system of ahp/stage-i

CTN :45305467

16 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For supply of neoprene rubber gaskets required for wet ash system of ahp/stage-i

CTN :45243141

09 Jun, 2026 12.78 Lacs

Murshidabad - West Bengal

Tender For procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp - procurement of different spares related to bottom ash clinker crusher and bottom ash system for overhauling of unit 2 scheduled in july august 2026.sgtpp, cam segment for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, shaft with shaft struct & shaft sleeve for bottom ash crusher dcips moc-en24 & ss 410,drawing no 25p06-t-1b-582, wear plate front for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate back for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, wear plate side for clinker crusher for bottom ash crusher dcips drawing no-25p06-t-1b-582,material-durite,bhn:500, gland for packing for bottom ash crusher dcips moc-ci fg-260 is:210,drawing no 25p06-t-1b-582, packing gland follower for bottom ash crusher dcips moc-bronze ltb 2,is:318,drawing no 25p06-t-1b-582, packing gland flange for bottom ash crusher dcips moc-ms,is:2062 gr-a,drawing no 25p06-t-1b-582, lantern ring for bottom ash crusher dcips moc:brass ltb-2,is318,as per dcips drawing no 25p06-1b-t-722, labyrinth ring of bearing housing moc-ms is 2062,for ahp-ifor clinker grinder,make-dcips, cam bolt for exen crusher for bottom ash crusher size: m20 x 65 long,sq.head,thread length 34 mm with nut,lock nut & spring washer.m.o.c: en8, chain simplex for bottom ash crusher dcips drawing no 25p06-t-1b-582, sprocket drive and driven for bottom ash crusher dcips drg.no.28p03-1b-t-582(rev-2), feed sump for bottom ash clinker crusher for bottom ash crusher dcips as per dcips drawing no 25p06-1b-t-722, nozzle tip with ceramic insert # 2,13 dcips for jet propulsion pump,part no-2&13,as per dcips drawing n0.-25p06-1b-t-591# for jet propulsion pump,as per dcips drawing n0.-2 5p06-1b-t-591 sgtpp1, nozzle inlet for jet pump for jet pump sgtpp dcips moc: fg,is 210,as per dcips dwg no 25p06-t-1b-591, throat cum disch pipe of jet pump for jet pump sgtpp dcips moc: durite(bhn 500-550),as per dcips dwg no 25p06-t-1b-591, punched washer type a for jet pump,moc:ss410/416,as per dcips punched washer (type dcips punched washer (type a) for m 20 bolts is 2016 of of jet pulsion pump,as per drawing,part no-05,material: steel, guide angle lh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, guide angle rh for ba feed gate for ba feed gate dcips moc-ms is:2062 gr a,drawing no 25p06-1b-t-572, gate roler fitted with bush for ba feed gate dcips drawing no-25p06-t-1b-572,material-steel-is:1030, renewable seat lip for ba feed gate for ba feed gate dcips moc-ms is:2062 with ss316 lip,drawing no 25p06-1b-t-572, adjustable seating wedge # for bottom ash feed gate assembly as per drawing no.28p03-1b-t-576(rev-2), enclosure cover plate # dcips for bottom ash hopper feed gate enclosure, moc:ms,is:2062,10mm thk,as per dcips drawing no 25p06-t-1b-572, gasket,for ba feed gate access door for bottom ash moc: neoprene rubber , dcips drg no: 25p06-1b-t-572, gasket for feed gate enclosure for ba feed ga moc: neoprene rubber, elbow,200nb x45 for wet ash system sgtpp dcips moc: durite (alloy c.i),bhn:450-500,as per dcips dwg no 25p06-1b-t-831, elbow,200nb x90 for wet ash system sgtpp moc: durite (alloy c.i) bhn:450-500.as per dcips dwg no 25p06-1b-t-835, lateral,200nbx45 p/p/p for wet ash system sgtpp ba slurry line.moc: durite(alloy c.i) bhn: 450-500, guide angle bracket for ba feed gate for ba feed gate dcips moc-ci fg-220 is:210,drawing no 25p06-1b-t-572

CTN :45201311

30 May, 2026 NA

Birbhum - West Bengal

Tender For procurement of miscellaneous items for u-3 oh under ahp-mm deptt at bktps - materials, u-clamp,m16 for 8 in ci pip for ahp bktpp moc: ms; size: 232mm dia,308mm length,75m ( with 02 nos of nuts and 02 nos of washers for each u-clamp ), u-clamp 16 mm dia with 02 nos nuts & 02 nos washer# for 150 nb ms line ( with 02 nos of nuts and 02 nos of washers for each u-clamp ), pipe bend (short),50nb,90 deg for ahp bktpp moc: ms is:1239,heavy grade,without flange ( thickness not less than 5.54mm ), pipe bend (short),100nb,90 deg for ahp bktpp moc: ms is:1239,heavy grade,without flange ( thickness not less than 8.58mm ), pipe bend (short),80nb,90 deg moc: ms is:1239,heavy grade,without flange ( thickness not less than 8.08mm. ), union,ms-25 nb, nipple ms-25 nb, elbow ms-25 nb # ( thickness not less than 4.55mm ), elbow,1/2 in for 12x10 diffuser feeder air line ahp-1 bktpp moc: gi,with both ends inside threaded, pipe bend (short),65nb,90 deg for ahp bktpp moc: ms is:1239,heavy grade,without flange ( thickness not less than 7.01mm ), nipple,1/2 in for 12x10 diffuser feeder air line ahp-1 bktpp moc: gi,length-50mm, union,ms-15 nb, elbow 150nb,90 deg for ahp bktpp moc: ms is:1239,heavy grade,without flange ( thickness not less than 10.97mm ), counter flange for 150nb ms pipe for ahp bktpp moc: ms; od-280 mm,id-170 mm,pcd-240 mm,holes-08 nos,hole dia.-20 mm ; 01 set=02 nos, counter flange for 80nb ms pipe for ahp bktpp 01 set=02 nos, nipple ms-40 nb, nipple ms-15 nb, pipe bend - 45 deg. , 65nb,ms is: 1239 make-blue sta ( thickness not less than 7.01mm ), tee,1/2 in for 12x10 diffuser feeder air line ahp-1 bktpp moc: gi,with all ends inside threaded ( moc: ms ), elbow 90 deg # moc-ci bs1211 class d,size-10",ahp-i# for fa line ( moc- ni-chrome alloy ci, hardness-400bhn min, bend min working pr-0.55ksc(16"hg),working in vacuum line.wetting head. ), turn buckle,gi ( type-eye to eye, eye hole should be for m20 bolt total length-1350mm, thk-20mm square section-50x250mm ), bend pipe, 90 deg, 40nbx40nb,ms seamless for wet ash system moc-ms thk-3.7mm as per sch 40 steel pipe, reducer 25x15mm ms # with both end inside pipe thread, counter flange for 400nb ms pipe for ahp bktpp as per ansi-16.1 ; class 125,flat face; 01 set=02 nos ( 1st : 8 set flanges flange od: 630mm flange id: 410mm pcd: 580mm no. of hole: 16nos. hole size: 20mm flange thickness: 20mm 2nd : 7 set flanges flange od: 595mm flange id: 410mm pcd: 545mm no. of hole: 12nos. hole size: 20mm flange thickness: 20mm ), counter flange for 100nb ms pipe for ahp bktpp as per ansi-16.1 ; class 125,flat face; 01 set=02 nos