Latest dust excluder Tenders | Government dust excluder Tenders

CTN :45321471

05 Jun, 2026 16.80 Lacs

Jhalawar - Rajasthan

Tender For supply of spares for dust suppression system for coal stock pile and conveyer system in chp, katpp, jhalawar. - solenoid valve , solenoid coil with connector , solenoid valve , solenoid valve , solenoid valve , coil for item sr no 3,4,5 , pressure switch , control transformer 1.5kva, primary :-380-400-415-440vac, sec.:-110vac , control transformer , solenoid valve , solenoid coil with connector , solenoid valve , solenoid valve , solenoid valve , coil for item sr no 3,4,5 , pressure switch , control transformer 1.5kva, primary :-380-400-415-440vac, sec.:-110vac , control transformer , auxiliary contactor , auxiliary contactor , aux. contactor with 3no+1nc, 12a, 110vdc coil voltage , mpcb 2.2-3.2a, 50ka , power contractor 45a, tp, 110vac coil voltage , power contractor 170a, tp, 110vac coil , over load relay range:28-40a , over load relay range:85-135a , selector switch 4pole, 2way, 6a , auto/manual selector switch 3p, 4way with off , on delay timer with 2no,2nc, coil voltage -110vac , 6" panel heavy duty exhaust fan, 240vac , steel panel lock knob type ktisn-black and silver finish, 22.5mm dia, round shape

CTN :45325588

09 Jun, 2026 40

Multi City - Karnataka

Tender For procurement of cleaning materials for huskuru gp for the year 2026-27 - coco broom with 5 feet length only natural product to sweep the outdoor only, garbage cover small size, metal type big web stick16 to 24 feet length, small web stick 8 feet, metal dust pan, plastic dust pan, water jug normal size, plastic bucket, system herbicide glyphosate 41% sl, ammonium salt of glyphosate 71 % sg powder, grass cutter or weed cutter 4 stroke engine honda or other brand made company only 1 year motor warranty only without spares running petrol only, grass cutter or weed cutter 2 stroke engine with weed cutter 250meter wire 2sets of blades 1 year service warranty period without spares only china make only no brand petrol and oil running, with push cart set and 3phase honda motor and pump 100 meter flexible hose cable 2no spray guns 250 ltr capacity tank 1 year warranty for motor out of service is free up to 1year spare are chargeable, battery & manual sprayer to wear the back side 16ltr capacity tank no warrant for battery only service warranty 6months without spares only , giantbigfogging machine 1.9 ltr consumption ltr per hr chemical tank 5ltr capacity hand pump 3 to 4 time then cahrgeble battery running 1 year service warranty only with spares and labour charge are extra. to diesel and petrol running only, mini small fogging machine to spray for mesquites no warranty product to use diesel and mini gas can, the composition of malathion tech 5.0% based on 95% chain clay 10% soapstone, toilet cake or odonil fragrance of wash room purpose only, bamboo ladder, mop small cloth to use office table and chairs cleaning purpose only, clip mop set it use moping purpose to office only, apron, sodium hypo chloride, weed control chemical, mask branded, gum boots branded, pvc hand gloves 16 inches, coco broom, soft broom, toilet cleaning acid, malathion oil 5.0% e.c, pesticide (fogging chemical with water mix), fogging chemical (with fuel mix), black phenyl, white scented phenyl, alum crystal, malathion dust 5.0%e.c, bleaching powder 33% chlorine, safety helmets, sanitizer

CTN :45322644

01 Jun, 2026 8.70 Lacs

Sawai Madhopur - Rajasthan

Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

Central Government/Public Sector

CTN :45337287

15 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of dust excluder for jsl type brake cylinder to drg.no.cee/cr/emu/mtn/ka/4/010/r2. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :44824271

26 May, 2026 23.40 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : annual contract of operation and maintenance work to carry out flying ash/dust control in lagoon-i and ii of ash dyke area by means of water sprinkling system at sstpp, stage-i, dongalia distt. khandwa. - annual contract of o&m work to carry out flying ash/dust control in lagoon-i & ii of ash dyke area by means of water sprinkling system at sstpp, stage-i, dongalia distt. khandwa. note:- (1) quoted rates shall be excluding gst. the evaluation of prices shall be done on least of the total landed cost to mppgcl i.e. after considering gst rate quoted in the bid.

Central Government/Public Sector

CTN :45264914

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho

Central Government/Public Sector

CTN :45283372

10 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of dust excluder for 203mm air brake cylinder (with slack adjuster) conforming to rdso spec.no.: c-k013, rev.01 to rdso drg.no.- rdso/sk-81200, item no.-22(sketch-81204, item no. 5). note:- item to be procured from approved vendors as per uvam icf id- 2300087. [ warranty period: 30 months after the date of delivery ] ]

CTN :45261968

29 May, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap melting in which includes ms hanger, buffer patch, lever, silent block with negligible rubber attachment, broken ms roller bering without brass case, broken ms ball bering, bering cage, m paid, yoke lever, tensioning device, tension rod, spare parts of cbc, light weight/small spring, ms coller, wearing plate, nut- bolt, revits, retaining cap, buffer spendle, handle, small size of ms plates/sheets and strip, hose pipe clip, ms window frame lever/strip, dog spike, round spike, vertical/lateral shock absorber, different type of bmbc parts such as cylinder body, piston, piston packing, plunger, plunger spring, chain, circlip, piston trunk, tee bolt, ratchet, adjusting tube, released spring, spring washer, iron washer, knuckle, small cutpics of pipe, ms bush, hand brake trunnion, split pin, cotter, spare part of rail fittings, jubilee clip, dust excluder, latch, shim for plunger, special washer, ms ring, slotted nut, hex head bolt, empty casing of air brake cylinder, flange, bmbc cover, inculiding some new but absolute items available with or without negligible nf, wires, lugs etc attachments, in various sizes and other similar/unknown ferrous item which comes under melting scrap location; - south side of oil godown. beside road lbpl, dbaw, gst-18%, tcs -1% , hsn code-72045000, allocation-20714208

CTN :45228902

29 May, 2026 NA

Jaipur - Rajasthan

Tender For rate contract for supply of surgical consumable items and digital x ray films - digital x-ray film, fuji di-hl (blue base) 8*10, digital x-ray film fuji di-hl (blue base)10*12, digital x-ray film carestream 8*10, digital x-ray film carestream 10*12, dental x-ray film, led apron, cassette for cr system (fuji) 8*10, cassette for cr system (fuji) 10*12, cassette for cr system (carestream ) 8*10, cassette for cr system (carestream )10*12, led barrier 2.00 mm, x-ray viewing box( with light brightness control) 26*17, cotton balls(pack of 500), abdomen belts, b.p. knife blade no. 11, 15, 18, 22, 23, baetigrase dressing 10cm x 30cm, bain air circuit adult, bain air circuit pediatric, bleaching powder 25kg., blood collection bag (single) 100ml., blood collection bag (single) 350ml., cervical collar all size, crepe bandage 10cm x 4mt., crepe bandage 15cm x 4mt., crepe bandage 6cm x 4mt., crepe bandage 8cm x 4mt., crescent blade, dyna plast 2 inch, elastoplast 10cm x 1 mt. sterilized pkt, elastoplast 10cm x 2/3 mt. sterilized pkt, elastoplast 10cm x 6mt. sterilized pkt, fast absorbable polyglactin 910 half circle taper cut, follys cath no. 12 sterilized pkt, guarded knife (chemical sharp) 300m, guarded knife (chemical sharp) 500m, i.v. transparent film dressing, kezatofeme (chemical sharp), micro pore 1.25cm., needle cutting half circle curve all size, pop powder 25kg. plaster of paris, precision guide needle no. 24, roma drain bag sterilized pkt, rubber sheet (mackintosh) (1x2 mtr pack), stockinet roll, thumb control suction catheter no. 6 per pes., thumb control suction catheter no. 8 per pes., twinborn nasal oxygen ped sterilized, twinborn nasal oxygen set adults sterilized, baby diaper new born size, baby diaper small size, baby kits set of 5, delivery drap sheet large, bed sheet disposable, disposable hiv protection kit, surgical reinforced gown, surgeon gown disposable, first aid box, balance salt solution 500 ml, hand sanitizer 5 liter, hand sanitizer 500 ml, liquid hand wash 500 ml, liquid hand wash 1ltr, cleaning power kg packet, hand wash shop 100 gm, instrument sterilizer small electric, formalin chamber, high flow mask, bk traction adult, bk traction pediatric, antibacterial wipes/ towelettes, paper towels, bedpans disposable, trach care tray disposable, phenyl 5 liter, kellys pad, shoe cover pair, slipper pair, straight(pack of 5 burs), taper(pack of 5 burs), inverted cone(pack of 5 burs), round (pack of 5 burs), surgical burs (31 mm), 15 to 40 (25mm) (pack of 6 files stainless steel) k-files (2% taper), 15 to 40 (21mm) (pack of 6 files stainless steel) k-files (2% taper), 45to 80 (21mm) (pack of 6 files stainless steel) k-files (2% taper), 45 to 80 (25mm) (pack of 6 files stainless steel) k-files (2% taper), 10 no. k-files (2% taper)(21 mm), 10 no. k-files (2% taper)(25 mm), 15 to 40 (pack of 120 gp points) gutta percha points: 2%, 45 to 80 (pack of 120gp points) gutta percha points: 2%, de pulp, disposable plastic suction tips (pack of 100 tips), zinc oxide powder (pack of 110 gms), eugenol(pack of 15 ml), glass lonometer cement restorative (pack of 15gms powder/ 10ml liquid), silver filling material 10 gm, mercery filling material 10 gm, chlorhexidine (endo -chx -2%), lubricant for airotor 500 ml, posterior composite resin kit, temporary filling material (pack of 40 gms), hypochlorite 3% (pack of 500ml ), gauze swab non-sterile packet (100 pcs), liight cure machine, endo motor, 20 no 4%, 20 no 6%, bio medical waste segregation trolly set (mild steel) (60 ltr - black, red, yellow, foot operated dust bin (colour - red, yellow, black) 60 ltr, foot operated dust bin (colour - red, yellow, black) 20 ltr, waste bin with foot paddle and wheel ( 240 ltr capacity ), sharp containers (26) ltr - blue, sharp containers (5) ltr - blue, foot operated dust bin 30 ltr capacity, needle cum hub cutter, multy utility cart 450 ltr capacity, plastic puncture proof white container 6.5 ltr capacity, utility gloves, bio medical waste collection

Central Government/Public Sector

CTN :45227707

25 May, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of ohk for 203mm air brake cylinder (bogie mounted air brake cylinder) consisting of 23 items:- 1) circlip light b-16 to drg. no. sk-81200 it.53 qty-2 nos/kit, 2) circlip light b-22 to drg. no. sk-81200 it.05 qty-1 no/kit, 3) split pin dia 5x40 to drg. no. sk-81200 it.18 qty-3 nos./kit, 4) jubilee clip size 5 to drg. no. sk-81200 it.21 qty-1 no/kit, 5) circlip light a-32 to drg. no. sk-81200 it.31 qty-1 no/kit, 6) split pin dia 3.2x18 to drg. no. sk-81200 it.38 qty-3 nos/kit, 7) jubilee clip size 2 to drg. no. sk-81200 it.51 qty-1 no/kit, 8) bush with filter to drg. no. sk-81202 it.3&4 qty-1+1 nos/kit, 9) dust excluder to drg. no. sk-81204 it.05 qty-1 no/kit, 10) pison packing to drg. no. sk-81204 it.10 qty-1 no/kit, 11) roller to drg. no. sk-81206 it.5 qty-2 nos/kit, 12) shim for plunger to drg. no. sk-81206 it.16 qty-1 no/kit, 13) pawl spring to drg. no. sk-81206 it.19 qty-2 nos/kit, 14) slotted hd grub screw 'c' m6x6 to drg. no. sk-81200 it.20 qty-2 nos/kit, 15) solid taper pin dia 2x14 to drg. no. sk-81200 it.33 qty-1 no/kit, 16) collar to drg. no. sk-81206 it.04 qty-1 no/kit, 17) special washer for trunion body to drg. no. sk-81206 it.12 qty-1 no/kit, 18) special washer for pawl housing ring. to drg. no. sk-81206 it.13 qty-2 nos/kit, 19) special washer for plunger to drg. no. sk-81206 it.14 qty-1 no/kit, 20) special washer for pawl housing ring to drg. no. sk-81206 it.15 qty-2 nos/kit, 21) plunger spring to drg. no. sk-81206 it.18 qty-1no/kit, 22) special washer for rocker arm roller pin. to drg. no. sk-81206 it.22 qty-1 no/kit, 23) pawl to drg. no. sk-81206 it.08 qty-2 nos/kit. as per drawing nos. rdso sk-81200 alt. 5, sk-81202 alt.3, sk-81204 alt. 4, sk-81206 alt.3. and to rdso specn.no. c-k 013, rev.1 of oct.2012. [warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Dust Excluder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector