Latest dynamic balance machine scrap Tenders | Government dynamic balance machine scrap Tenders

Central Government/Public Sector

CTN :45567527

03 Jul, 2026 NA

Dhanbad - Jharkhand

Tender For supply & installation of additional accessories-quantum yield measurement unit ,polarization accessories ,low temperature accessories.

Central Government/Public Sector

CTN :45549279

17 Jun, 2026 NA

Bengaluru - Karnataka

Tender For digital earth fault locator suitable for dc system voltage grades 220v,110v,48v & 24v working on dc power supply 220v & 110v or ac-220v external supply. the unit shall consist of the following items i.transmitter working on dc system voltage measurement range: 0v- 500v dc with measurement resolution dc 1v & accuracy of 5%+/-5v, system for ground impedance measurement range: 0-1m ,accuracy:10%+/-3k ii. a receiver with insulation resistance measuring range at least:0-600k , insulation impedance measurement resolution: 1k . & the resolution of earth leakage current detection: 0.1ma with built in rechargeable power supply. item to be supplied with suitable signal clamps, current sensors, power adapters. makes and model: metravi-dcgfl-999 or dc trace of scope t&m or equivalent. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45548671

16 Jun, 2026 NA

Gaya - Bihar

Tender For supply of heavy duty grease pump with grease gun having in line flow meter as per specification (1) grease gun hand operated, (2) grease drum capacity 15 kg., (3) wheel for easy moving, (4) attached digitalmeter, (5) grease flow 0.1 kg. to 2.5 kg./min., (6) maximum working pressure 7500 psi, (7)grease discharge upto 9 gm/stroke, (8) wire braided grease delivery hose (length minimum 2. metre) having swivel connector assembly at both end. (9) accuracy plus minus 3 percent, (10) unit of measurement-kg/gm/lbs, (11) battery 2 nos. of 1.5 v. make/brand : skf/groz/elgi/ingersoll r/aeroboom or similar [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45557507

25 Jun, 2026 NA

Ernakulam - Kerala

Tender For supply of 1 pet 3 ply foil one to two color 170 5 mm reel length 600m uom is per reel and shall enter the landed price per reel line item 1 to 4 are same item hence quote same price , 2 pet 3 ply foil one to two color 170 5 mm reel length 600m uom is per reel and shall enter the landed price per reel line item 1 to 4 are same item hence quote same price , 3 pet 3 ply foil one to two color 170 5 mm reel length 600m uom is per reel and shall enter the landed price per reel line item 1 to 4 are same item hence quote same price , 4 pet 3 ply foil one to two color 170 5 mm reel length 600m uom is per reel and shall enter the landed price per reel line item 1 to 4 are same item hence quote same price , 5 pet 3 ply foil three to four color 170 5mm reel length 600m unit of measurement is per reel and hence bidder shall enter the landed price per reel

State Government

CTN :45329637

22 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : tender for measurement collection unit(mcu)

Central Government/Public Sector

CTN :45477664

19 Jun, 2026 NA

Ambedkar Nagar - Uttar Pradesh

Tender For corrigendum : procurement of bunker level measurement c and i spares for vstps stg5 - strain sensor,014308,thermo fisher, instaltn kit,014803,thermo, level cntrlr unit,046634,thermo

State Government

CTN :45525068

29 Jun, 2026 41.51 Lacs

Raichur - Karnataka

Tender For routine monitoring / preventive maintenance / breakdown / emergency /regular servicing of pneumatic cylinders, solenoid valves, limit switches & pressures switches pertainsto units-5,6 &7 mill reject handling system(mrhs).operation and maintenance of dense phase mill reject handling systemof unit-8.the work involves-a)operation and maintenance of dpmrhs plc systemb)i&c maintenance works of air compressor.c)servicing/re-calibration of solenoid valves,limit/proximity switches & pressures switches etc.routine monitoring/maintenance of spm analyzer systemspertains to unit-5 to 8.the work involves-a)operation and maintenance of dpmrhs plc system.b)i&c maintenance works of air compressor.c)servicing/re-calibration of solenoid valves, limit/proximity switches & pressures switches etc.routine monitoring/maintenance of spm analyzer systems pertains to unit-5 to 8.the work involves-a)cleaning/servicing of transmitters & reflector units and blower filters of spm analyzers, pertains to units-5 to 8.b)carrying out maintenance works under the supervision of i&c engineerregular monitoring/checking healthiness of unit-7&8 coal bunker level monitoring systems.routine maintenance of bunker level monitoring systems.the work involves- a) cleaning/checking of 3d level sensors.b) cleaning/checking healthiness of local control panel at bunker floor.c) ensuring healthiness of signals to control room pc,dcs&chp control room digital indicators.regular monitoring/maintenance of hfo tanks level measurement systems.the work involves-a)cleaning/checking healthiness of radar level transmitters installed at hfo tanksb)cleaning/checking healthiness of local digital indicators installed at foph.c)cleaning/checking healthiness of plc unit installed at unit control room-7.the nature of work is round the clock maintenance.the cleaning/servicing and maintenance works of all the above mentioned systems shall be carried out during units aoh period.the required t&p and ppe for carrying out maintenance works shall be arranged by the contractor/agency itself.

State Government

CTN :45560348

06 Jul, 2026 NA

Barnala - Punjab

Tender For supply of elementary charge quantization apparatus , external photoelectric effect characterization system , semiconductor bulk resistivity measurement unit , paramagnetic spin resonance spectrometer , larmor precession & nuclear spin transition setup , galvanomagnetic coefficient measurement station , ferromagnetic flux density & coercivity analyzer , ferroelectric polarization polarization-electric field mapping system , p-n junction thermionic leakage & energy gap profiler , electromechanical transduction efficiency & resonant coupling analyzer

CTN :45535219

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of ece department lab electronics equipments - equipments for ece, dual output regulated dc variable power supplyinput voltage : 230v/50hz acoutput voltage :(0-30)v dcoutput current :(0-2)a dcprotection circuit : over voltage, over current, and short-circuit protectionhigh efficiency : greater than 85%low ripple and noise : less than 50 mvdigital display, function (signal) generatorspecs:frequency range : 0.1hz to 5mhzdisplay :4 to 6 digit led displayoutput waveforms : sine, triangle, square, pulse, rampamplitude :0-20 vpprise time :100 nsdistortion : 1% within specified frequency rangepower supply : 230v ac 10% , 50-60 hzoutput amplifier protection : short circuit and 15voverload protectiondc offset: 0 to 10 v adjustableattenuation: 0 to -60 db, decade resistance box range : 1 to 1m rotary switch selection with 6 dialssteps : 1 , 10 , 100 , 1k , 10 k , 1m accuracy : 1%, decade capacitance box range : 100 pf to 100 frotary switch selection with 6 dialsmaximum voltage : 350vaccuracy : 1%, decade inductance box range : 10 h to 10 hrotary switch selection with 6 dialslow-loss inductorsaccuracy : 1%, sim reader trainer kitpower supply :operates on 230v ac 10%, 50hz mains supplybuilt-in regulated smps power supplyoperating dc supply : 5v/12v with overload and short-circuit protectionsim card interface :supports gsm sim cards compatible with 2g / 3g / 4g / 5g networkssim card read/write interfacesupports sim card initialization, authentication and communication functionscompatible with standard 6-pin / 8-pin sim card socketscommunication interface :usb 2.0 interface for pc communicationrs-232 serial communication interfaceuart communication facility for embedded system interfacingsim operating parameters :selectable sim clock frequencies3.579 mhz7.159 mhz14.318 mhzsim supply voltage selection facilitysim reset and activation controlsupported protocols and standards :gsm etsi 07.07 and etsi 07.05 at command supportiso/iec 7816 smart card communication supportsim communication command monitoring facilityhardware features :on-board sim card socketled indication for :power statussim detectionreset activityuser manualutility software cd / downloadable software packagedata transmission/receptionbuilt-in keypad for standalone operation.lcd display module (128 64) for menu and status display.on-board microcontroller-based control section.software support:at command execution and monitoring software.sim manager utility software.data logging and communication terminal utility.pc-based gui software for sim data communication experiments.trainer features:fault simulation facility for troubleshooting experiments.simulation of faults such as:sim not detectedclock failurevcc failurereset failuremultiple on-board test points for signal observation.test points for:sim rstsim_clksim iovccuart tx/rxsuitable for cro/dso signal monitoring.glass epoxy pcb with educational block diagram layout.compact tabletop enclosed cabinet design.construction:front panel with printed block diagram.banana test points and patching facility.standard accessories:gsm sim trainer unit.usb communication cable.rs-232 communication cable.power cord., microwave test bench with reflex klystron oscillatormicrowave source :relex klystron tube with klystron mountoperating frequency in x-band (8.2ghz to 12.4ghz)electronic tuning through repeller voltage controlsuitable for cw microwave generationklystron powersupply:regulated klystron power supply unitbuilt-in modulation facilityoverload and short circuit protectionoperates on 230v ac 10%, 50hz mains supplywaveguide components:isolator variable attenuatorfrequency meterslotted line section with tunable probecrystal detector mountmatched loadmovable short / terminationwaveguide stands and accessoriesmeasurement unit:solid state vswr meter with high sensitivityswr measurement facilitysuitable for detector output monitoringtechnical specification :frequency range : 8.2 ghz to 12.4 ghzwaveguide types : wr-90detector type : crys

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Dynamic Balance Machine Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors