Latest dynamic braking resistor Tenders | Government dynamic braking resistor Tenders

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

corporations/Associations/Others

CTN :40934658

05 Jul, 2025 NA

Secunderabad - Telangana

Tender For quotations for stationery items for the building maintenance (zonal commissioner office building) of circle-29, sec'bad, including the cost of transportation, etc as directed by engineer-in charge -supply of a4 paper bundle, 70 gsm of jk copier, 500 sheetssupply of legal paper bundle, 70 gsm of jk copier 500 sheetssupply of file pads/boardssupply of scissorssupply of camlin plastic scale 30cmsupply of hauser correction whitener pensupply of faber castell textliner highlighterssupply of apsara non dust erasersupply of apsara long point sharpenerssupply of paper flag single coloursupply of sticky note (paper flag) 5 colours of size: 3 x 3 inchsupply of multicolour rubber bandssupply of short hand bookssupply of pidilite fevi stik glue stick 25 gmsupply of apsara platinum extra dark pencilssupply of fevicol mr 50gsupply of kangaro stapler no 10supply of kangaro hp-45 staplersupply of transparent tape - 24mm (1 inch)supply of kangaro one hole punchsupply of kangaro stapler pin no. 10-1m (pack of 20 small boxes) -used for popular no 10 staplersupply of citizen ct 555n desktop calculatorsupply of registers 200 pages5supply of registers 100 pages26supply of uni-ball green pens/black/blue/red27supply of l. folder file legal size durable clear transparent plastic file folders28supply of l folder file a4 size durable clear transparent plastic file folders29supply of anchor by panasonic anchor 22568 spike guard with 4 switch +4 socket+3 pin 1.5 meter, 4 socket extension boardssupply of box folders31supply of hauser xo ball point pen -black, blue red ball penssupply of tochens3214supply of 9" x 4" brown, cheque envelopes, 100 gsm, durable & versatile envelopessupply of binder clips 19mmsupply of rectangular rubber stamps | 5.9 cm x 1.3 cm | round, rectan , transparent acrylic body |, hdpe, handle |, vistaprint, supply of faber-castell stamp pad, supply of multipurpose drawing board, 16x24 inches, 8mm thick, supply of 11" x 5" brown envelopes/covers (50 covers), supply of 100 pcs assorted colours plastic metal paper clip, supply of jk easy copier paper green fs 70gsm, supply of file tags 8 inches (pack of 100) red and white colour pap binding lace-cotton tag thread for knots, supply of 1" x 5" white envelopes/covers -thick (50 envelopes), supply of stainless steel scale ruler 30 cm, supply of camlin kokuyo - rubber stamp pad ink-25 ml black/blue, supply of kores sapphire carbon paper, supply of kangaro dp-52 paper punch, supply of kangaro heavy duty size stainless steel 24/6 big stapler pin, supply of anchor 600mm altrix (ruby) ceiling fan including cost anc conveyance of materials to site, labour charges etc., complete, manufacture, supply and exrection of kiosk (food vending unit) including items below, a) additional 100mm x 50mm "ms sq. pipe (isi marked), b) top frame-50mm x 50mm "ms sq. pipe (isi marked), c) stiffener bottom 100mm x 50mm "ms sq. pipe (isi marked), d) stuffer top 40 x 20ms sq. pipe (isi marked), e) side post-75mm 75mm ms.sq. (isi marked), f) panelling outside - gi sheet 1.2 mm, g) internal wall panelling - 8mm mdf laminated board, h) roof outside-102mm thick properly sloped and water tight, 1) false ceiling-8mm mdf laminated board, j) bottom flooring - 10 mm cement board with vinal carpet, k) door-insulated with for locking agreement hold draft handles, 1) insulation rock wool density of 24kh/m3 rb rock wool insulation (side wall-25mm of 16kg density, m) wiring all wiring shall be concealed type shall be of pvc insulate copper wire (polycabe), n) electrical fitting - all electrical fitting in the cabin shall be 220-240v ac 50hz tube, boorm light, fan, switches, socket, ac point (mbc) (all type of windows air conditioning system as desired upon can be installed), o) earthing - earthing point shall be provided for safety, p) outside painting- phosphate the cabin and painting with i ceat of epoxy primer with two coat of epoxy paint, q) legs-6-inch height, four legs at all four corners., )hooks-specially formed hook fo

CTN :40937275

24 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of c-channel stiffener

Central Government/Public Sector

CTN :40945952

28 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of stiffener plate of front carrier plate for aar-h-type cbc with bdg as per drg. no. rdso/ cg/drg/24034, alt-1. note: the item should be painted with rozc as per is 2074 followed by two coa ts of synthetic enamel paint with dft up to 160 micron as per is 8662 (color green) [ warranty peri od: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40946370

21 Jul, 2025 NA

Sambalpur - Odisha

Tender For supply of set of fasteners for axial stiffener plate consisting of 4 items.(1) hex head bolt of size m16 x 45,grade 8.8 is:1364 part i,qty-1 nos.(bolt thread end side should be 5.5 split pin hole), (2) m16 hex castl e nut grade 8, is: 1364 prt i,qty. 01 nos. (3) m16 plain washer din 125, qty-01 nos, (4) split pin 5x40 long is: 549, qty. 01 nos. n.b.for bolt & nut the coating as per mdts-057.make:-tvs/unbrako/dfl/tuff or simil ar. [ warranty period: 30 months after the date of delivery ]

CTN :40922303

12 Jul, 2025 NA

Bangalore - Karnataka

Tender For tender for supply of 56 types of saloon interior rubber packing profile as per beml drawing and pts : : - rubber profile b window , packing floor coving window mask , packing floor coving door pillar , rubber profile a bic cover , rubber profile a door coving , rubber profile a door coving , rubber profile a infill strip , rubber profile a coving face , rubber profile a cubicle face , rubber profile a door pillar panel , packing grab pole ceiling , rubber profile d infill strip , packing hinge door coving , packing stopper lock coving , packing cubicle door adjustable latch , packing plate perforation , rubber seal ceiling end wall , packing pib , packing hinge partition and ceiling end , packing cubicle door upper bracket , packing locking device , packing hinge frp to endwall bracket , packing gangway ceiling front to roof 3thk , packing door coving lock plate , packing door coving lock plate , packing window mask to cb , packing window mask to cb , packing door stiffener plate , packing door stiffener plate , packing window mask to extrusion , packing window mask to extrusion , packing window mask , rubber profile c , packing cubicle floor coving end wall braket , packing door light , packing drm , packing cubicle panel to cb 2thk , packing cubicle panel to cb 3 thk , packing gangway ceiling front to roof 2thk , packing side coving hinge to al extrusion 2thk , packing side coving hinge to al extrusion 3thk , packing speaker , packing cubicle u bracket to upper bracket , packing cubicle stopper bracket bottom , packing floor coving cubicle , packing rope hook & gas spring , packing infill stopper , packing hinge cubicle door , packing gangway ceiling-upper bracket , packing gangway ceiling rear mtg 2thk , packing gangway ceiling rear mtg 3thk , rubber profile e ceiling , packing coving extrusion runner to roof , packing coving extrusion runner to roof , packing infill strip al extrusion 2thk , packing infill strip al extrusion 1thk

Central Government/Public Sector

CTN :40931759

15 Jul, 2025 NA

Hubli - Karnataka

Tender For supply of stiffener 5x105x105 to item no-18 of drg noicf/std-1-0-012 alt 'k', material & spec ification:irs m41-97. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :40931785

09 Jul, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of stiffener plate (8x135x410) of front carrier plate for aar-h type cbc with bdg to rdso drg . no. rdso/cg/drg/24034 alt.1 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40916940

07 Jul, 2025 NA

Agra - Uttar Pradesh

Tender For supply of stiffener plate of front carrier plate of aar-h type cbc coupler as per rdso dr awing no.rdso/cg/drg/24034 (1 no. set of stiffener plate consists of -01 number of stiffner p late , 02 numbers hexagonal head bolt m16x45 (as per is:1364), 02 numbers hexagonal castle nut m16 (as per din 935 ) & 2 numbers split pin size 4 x 40 mm as per is: 549) [ warranty period: 8 4 months after the date of delivery ]

Dynamic Braking Resistor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector