Latest earth leveling Tenders | Government earth leveling Tenders

corporations/Associations/Others

CTN :45522918

16 Jun, 2026 15.88 Lacs

Hyderabad - Telangana

Tender For rock cutting and laying of cc road from udipi hotel to ritaz residency in dastagirnagar of noori nagar ward-69 - rs. 20.00 lakhs

CTN :45506019

20 Jun, 2026 NA

Bhuj - Gujarat

Tender For supply of existing pipeline disconnectio , disman of pcc chiseling pneumatic hammer , disman of concretercc,cuttingof reinf , exca of earthsoft rock,cutting,clearing , removal of 200 kl tank , torsteel reinforcement , supply and fabofdishend shellplate , supplyofstructuralsteel and fabric , supply and installationofnozzles , supply and installation of sump , supply and ins. oftank manholes , sand blasting of tank , painting of tank internal , painting of tank external with piping , tank hydro testing after fabrication , instln of tank underground,180kl , tankcalibration and hydrotesting , pipinginchmeter laying ss304 , welding of pipeline , removal of sand murram soil , sand filling , sply and layg of concrete pcc,ratio , sup and lay of rccmixing test , sup and lay rr masonry,subandsuper str , construction of new earth pit

CTN :45492330

24 Jun, 2026 NA

Thoubal - Manipur

Tender For supply of site clearing and dressing , earth leveling and filling , topsoil supply and spreading , grass turf slipls supply , manure and fertilizer , watering facility and maintenance , labour charge

Central Government/Public Sector

CTN :45467639

29 Jun, 2026 1.74 Lacs

Sonitpur - Assam

Tender For supply of jungle cutting dao akuwa dao , sickle , khurpi , sharpener rock , rake with handle , hammer with handle , saw , reti , shovel , watering pipe , secature , hedge cutting scissor , spade hoe with handle , rain coat whole body cover , belcha with handle , small dao , folding aluminum ladder , aluminum gamla, large size for mixing of manure , petrol storage drum , farming bamboo hat , dao for general use , black wire , plastic sutli , iron nail , mulch film , hacksaw frame , hacksaw blade , wire cutting plyer , jute gunny bags , jute stuli , bamboo , measuring tape , aluminum bucket , carry bag

State Government

CTN :45445602

20 Jun, 2026 49.00 Lacs

Udaipur - Rajasthan

Tender For earth leveling work at agriculture college dungarpur, mpuat

State Government

CTN :45456435

20 Jun, 2026 49.00 Lacs

Udaipur - Rajasthan

Tender For earth leveling work at agriculture college dungarpur, mpuat

State Government

CTN :45411968

24 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm thick factory ma

CTN :45396936

19 Jun, 2026 NA

Karwar - Karnataka

Tender For loose scalling of hard rock cutting at innanje , including removing and refixing of msbn between km 702/0-2 (ohe mast 701/28-702/08) efile comp no 70070

CTN :45386932

16 Jun, 2026 6.59 Crore

Gwalior - Madhya Pradesh

Tender For construction and development (civil work) for construction and demolition waste plant of 100 tpd as per boq of rfp/dpr supplying erection and commissioning of machines/equipment for construction and demolition (c and d) waste plant of 100 tpd 2nd cal - all kinds of soil, "excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers,, loose or soft soil, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all w, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "foundations, footings, bases of columns, etc. for mass concrete.", cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., "columns, pillars, piers, abutments, posts and struts.", "reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves,, "lintels, beams, plinth beams, girders, bressumers and cantilevers.", "along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm o, "filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exce, thermo-mechanically treated bars. (fe 500 d or more), "aluminum turbo ventilator fan, size: dia 600 mm market rate", "sky light market rate ", 80x1.25mm m.s. laths with 1.25 mm thick top cover., "providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to is: 1868 wit, cement mortar 1:6 (1 cement : 6 coarse sand), 1:6 (1 cement: 6 sand), two or more coats on new work, "structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoist, 0.80mm thick with zinc coating not less than 275gm/m , 0.80mm thick with zinc coating not less than 275gm/m , "35 mm thick including isi marked stainless steel butt hinges withnecessary screws.", 35 mm thick shutters, half brick masonry with of class designation 40 in foundation and plinth in.cement mortar 1:4 (1 cement : 4 coarse san, "providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) nano polished (glossy, providing and laying broken china mosaic flooring for terrace using 12mm to 20mm broken pieces of glazed tiles to be lai, providing and fixing m.s. grills of required pattern to wooden frames of window etc. with m.s. flats at required specin, "construction of embankment/sub grade/ earth shoulders, as per clause 305 & its sub-clauses, where required but with app, "construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor, "providing, laying, spreading and compacting graded stone aggregate to wet mix macadam including premixing the material, providing and applying primer coat with cationic bitumen emulsion (ss1 grade) on prepared surface of granular base inclu, @ 0.25 kg per sqm (normal bituminous surfaces), for grading ii( 50-75mm thickness ) bitumen content 3.4% (vg-30), "for grading ii ( 30-40 mm thickness ), bitumen content 5.4% (vg-30)", procurement of fully automatic c&d waste processing unit(100 tpd) with dry and wet process inculding feeding & crushin, procurement of table vibrator for paver making unit including table vibrator,colour mixer,colour pigment,tables,concre, procurement of fully automatic fly ash bricks machine (120 ton compress force) with fully sensor based controlled 7 nos, procrement of vehicles articulated front end wheel loader,4-wheel drive,1.4 cum bucket,hydrostatic drive,, procrement of vehicles/tipper truck blazo 28t tipper,9 speed,bogie suspension,11x20-16pr tyres,6.17rar ,nac,16 cum box,4, procurement of pneumatic breaker (quotation), electrification /internal wiring and electrification (market rate)

CTN :45318395

16 Jun, 2026 66.42 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of double stranded nylon mesh panel with accessories of size 2250mm x 3000mm as per tech spec att , quick setting compound rapidite as per approved sample and make and is 9103 of 1999 make pidilite or dr fixit , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded conforming to is-383of 2016 , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded conforming to is-383 of 2016 , ms binding wire annealed not less than 0.9mm dia confirming to is-280 of 2006. , natural sand conforming to is-383 of 2016 specifications for coarse and fine aggregates. , screen post type mild steel circular hollow material ms steel tube conforming to is 1161 of 2014 dimensions 42.4mm od, 4.05mm thickness length 6000 mm as per tech spec att , screen post socket type mild steel circular hollow material ms steel tube conforming to is 1161 of 2014 dimensions 48.30mm od, 4.05mm thickness length 750 mm as per tech spec att , gi j hooks of size 90mm x 5mm for hanging nylon rope as per is-730 of 1978 , wire cutter 450mm length made of high grade chrome vanadium steel conforming to is- 5200 of 1998 , hand gloves leather 500g neatly stitched with elastic wrist and inner cotton lining of various sizes having min tear strength of 25 n , hammer sledge 1.81kgs made of high carbon steel hardened for durability conforming to is-841 of 1983 , steel gurmala or planer along with wooden handle and steel plate of 1.5mm thickness. plate of size 230 x 100mm conforming to is-1630 of 1984 , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles conforming to is- 2615 of 1989 and is- 3650 of 1981. , shovel of 5mm thickness with a wooden handle, made of high quality carbon steel and wt should be approx 2kgs conforming to is-274 of part 1 and 2 of 1981 , trowel mason brick or carandy made of stainless steel with wooden handle conforming to is-1630 of 1984 , measuring tape 30 m made of glass fibre nabc credited and pvc coated with fibre glass yarn conforming to is-1269-2 of 1997 , picks axes with chiesel and pointed ends is- 273 of 1990 , tasla iron 18 inch dia and made of galvanised iron and wt of 500gms. wide rim design with curved edges for easy handling and mtrl transfer as per is-1630 of 1984 , fawada of size 150 x 275mm made of high tempered iron or mild steel with wooden handle. , crow bar 5 ft long wt of 5kgs and edge width of 25mm conforming to is-704 of 1984 //bid details 2 / 27

Earth Leveling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government