Latest earth moving machinery Tenders | Government earth moving machinery Tenders

Central Government / Public Sector

CTN :45717261

13 Jul, 2026 NA

Jamnagar - Gujarat

Tender For providing of custom bid for services - statutory testing, inspection and certification of rim seal fire protection system foam modules, hot/eot cranes, and lifting tools & tackles at wrpl, vadinar, by a competent person approved by the chief inspector of factorie..

corporations/Associations/Others

CTN :45722214

09 Jul, 2026 NA

Budgam - Jammu And Kashmir

Tender For providing of bio medical waste management service - per bed basis - collection, lifting, transportation, treatment, disposal, segregation, documentation and reporting, storage and handling, supply of bmw bags and bar code based bmw management system including sof..

State Government

CTN :45061537

09 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage-cam-enquiry for supply of telescopic spout spares in fly ash handling system of cam division - winch rope, 8mm, steel wire rope, lifting pulley for 8mm steel wire rope,, single sheave, roller chain, 12b type, master link, for 12b roller chain, chain sprocket, for 12b chain, 30 teeth, chain sprocket for 12b chain 15 teeth, clamp shackle, for 8mm steel wire rope

CTN :45693900

10 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and installation of automobile trainers and equipment at consignee locations. (tender ref no.26008/2026-27) - light motor vehicle driving simulator, injector -multi hole type, pintle type, petrol engine - 2 stroke, motor cycle/ scooter, injector cleaning unit, injector testing set (hand tester), fuel feed pump for diesel, fuel injection pump - diesel - inline, fuel injection pump - dismantling tool kit, fuel injection pump - distributor fuel rotary pump with standard accessories, fuel injection pump - ve pump with standard accessories, cylinder liner- dry & wet liner, cylinder liner - press fit & slide fit, steering assembly - rack and pinion, air brake trainer assembly, alternator assembly - lmv, engine bearing model set, piston model set, front axle assembly, rzeeppa joint with stand for dismantling and assembly, full floating axle and semi floating axle assembly, wiper motor assembly, cut section model - 4 cylinder diesel engine, cut section model - automatic transmission gear box, cut section model - centrifugal clutch assembly, cut section model - diaphragm clutch assembly, cut section model - radiator - cross flow, cut section model - radiator - down flow, cut section model - shock absorbers, cut section model - single plate clutch assembly, cut section model - turbocharger, demonstration board - anti theft device car, automotive safety air bag simulator, car air conditioner trainer, demonstration board - crdi system, demonstration board - electronic ignition system and ignition coil, disk brake trainer, drum brake trainer, working model - power windows, working model - torque converter, denting kit set, engine compression tester (diesel), two post car lift- capacity 4 ton, electric operated, radiator pressure tester, tyre changer machine, tyre air pressure gauge with holding nipple, wheel alignment machince computerized 3d, wheel balancing machine (for wheel balancing of lmv), air conditioning service unit - car, automotive battery charger, automotive battery tester/ analyser, battery terminal cleaner tool, air blow gun, air impact wrench with impact sockets, engineers stethoscope, grease gun - 500 grams, oil can 500 ml, oil filter wrench - upto 500 mm, piston ring compressor - 50 - 100 mm, piston ring expander and remover - 50 - 100 mm, piston ring groove cleaner, belt tensioner gauge, car jet washer with standard accessories, auto electrical work bench, gloves: rubber, gloves: cotton, industrial/ safety shoes, industrial helmet, blow lamp: 0.5 liter, magnifying glass: 75 mm, lifting tackle/ sling: 1 ton, 2 meters, laser distance measuring instrument, demonstration board: electric vehicle cooling system, engine and transmission system for electric vehicle, cut section of electric vehicle motors, hvac trainer, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, lighting and wiring system for electric vehicle, electric vehicle diagnostic scanner, solar based charging system, electric vehicle tool kit, electrically insulating blanket, clamps for insulating blanket, insulated rubber mats, gloves: electrically insulated, industrial/ safety shoes: electrically insulated, glove inflator kit, goggle: white glass, ac current digital clamp meter, digital continuity tester, soldering iron set: mechanic electric vehicle

Central Government/Public Sector

CTN :45302597

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras tender for supply of fuel feed line blank -male , inserting tool , puller - shurlock-sl61 wt-m16 , dummy feed hose , special socket -alh-12437 , blanking plug for refueling valve , teflon dummy for fuel system , open end spsnner -thin 27 x 32 , blanking plate-fuel tank , fmt neck dummy plate , blanking plate bottom for aux tank , blanking plate top for aux tank , ncw dummy al welded , fmt tank side plate , rmt neck dummy cover , weighing beam , tow bar - aluminium -iss h1 , towing bar , trolley - mgb , tm engine trolley - turbomeca , alignment tool , wrench ext actuator assy , rigging tool-for direction control , spanner-tds , stand-tail boom , alignment tool , spacer-01 set of 4nos , protractor - issh1 , tab bending tool- iss h2 , rigging tool-clinometer mounting , assembly fixture , clinobar block , rigging fixture , alignment tool -for tds bracket , insertor - tds assy segment-3 , extrator - tds assy , drift , tow bar -wheel version , extracting tool -tail rotor assy , spanner - special , spanner - special , storage stand -floor board , special socket spanner , eo pod trolley , handling trolley -radar ant , desiccator removal tool-for eo pod , nitrogen purging valve -for eo pod , lifting sling-20 mm turretgun inst , lifting device assy , socket -for eo pod , media , media , static discharge pole , jacking tool , bucking bar , hoisting of alh , checking tool -strut-bracket assy , drill jig -for casing ring iss d , aris alignment fixture -ots , extractor , insertion tool , removal tool -support bush-trs , actuating media-upper control assy , ids lifting sling , base plate c-brg bush removal tool , extraction tool , moving table with wheels , installation trb stand , levelling bar , levelling bar , storage stand - mrb , locator -for stabilizer bracket , engine oil replenishment tool , holding tool ots and non ots mgb hsg , steeering arm , grip gaurd -grip collective stick , dail gauge holder -mra , spl socket spanner tommy bar 450 lg

corporations/Associations/Others

CTN :45696580

08 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, delivery, installation of one number dismantling joint along with replacement of worn out spare parts, testing and commissioning of 750 mm dia. pdv and other allied works of pump unit no. 5 at cwps-ii, grww. - supply, delivery, installation, testing andcommissioning of 700 mm dia ms dismantling joints., dismantling counter weight, lever, arm, hydraulic unit etc. and all other components of the hydraulic system one by one of 750 mm dia. pump discharge valve parts by parts sequentially and cautiously as per direction of the engineer-in-charge (eic) at grww., dismantling the 750 mm dia. pdv from the existing pipe-bay, installatio/fitting-fixing of barrel-piece/flange and lifting & keeping the same on the working platform sequentially and cautiously as per diretion of the eic at grww., to and fro transportation charges of 750 mm dia. pdv from grww to workshop including loading and unloading.., dismantling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of the eic at grww/workshop., supply, delivery and fitting-fixing of drive shaft of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of valve seal of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (ss 410) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of seat ring (epdm rubber) of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of stub bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of drive bearing bush of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of clamping ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of end cover of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of o ring of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft pin of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of allen screw of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., supply,delivery and fitting-fixing of gland plate of 750 mm dia. pdv sequentially and cautiously as per sample and direction of the eic at grww., supply, delivery and fitting-fixing of shaft key of 750 mm dia pdv sequentially and cautiously as per sample and direction of the eic at grww., repairing the damaged portion of the hole for holding the bearing of 750 mm dia. pdv by deposting metal, boring, machining, grinding etc., all complete, as per original shape and size and direction of eic at grww.., re-aasembling all the components of 750 mm dia. pdv parts by parts sequentially and cautiously as per direction of eic at grww., performing of necessary hydro-testing of the disc and body of 750 mm dia. pdv as per direction of eic at grww., lowering from the working-bay, installation, fitting-fixing of 750 mm dia. pdv in the existing pipe-bay removing the existing barrel-piece/flanges as per direction of the eic at grww., re-assembling and re-fitting all the components of the hydraulic system like counter weight, lever, arm, hydraulic unit etc. with the existing 750 mm dia. pdv installed in the pipe-bay parts by parts sequentially and cautiously as per direction of the eic at grww., test run, operation and commissioning of the entire system of 750 mm dia. pdv as per direction of the eic at grww.

State Government

CTN :45693715

07 Jul, 2026 4.99 Lacs

Bhiwani - Haryana

Tender For ( recall ) providing, supplying, installing and commissioning of 3 ton capacity stainless steel manual chain pulley block complete with stainless steel load chain, hand chain, load hook, gear mechanism and brake system suitable for lifting pumps

CTN :45683034

10 Jul, 2026 NA

Delhi - Delhi

Tender For supply of dip tub for hvac coils with lid/cover square pipe thickness-40x40x3mm, sheet thickness-03mm, material-stainless steel ss-304, 1. all four legs having wheel with brake system, 2. all four corners having lifting hook for lifting by overhead crane. 3. water drain top required for water drain. 4. same size lid/cover required with handle. (tentative drawing attached) ]

Central Government/Public Sector

CTN :45698429

22 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of hydraulic puller + pusher arrangement for removing bearing, pulleys & couplings. including special purpose fixture as per specification given below. (a) hydraulic arrangement: - the system to comprise of the following (1) trolley with lifting arrangement height:500mm to 830mm from ground. (2) hollow jack: -20ton as per specification, stroke: 75mm, ram dia: 60mm, centre hole: min. 30mm. (3) hand pump: hp-12 as per specification volume discharge/stroke 2.8cc, maximum working pressure 800kg/cm2, output port: ? inch bsp, (4) pressure gauge glycerine filled all ss body, rated capacity 700kg/cm2 (5) jack hose 1.25-metre-long capacity: 700kg/cm2 (b) 3 jaw bearing puller attachment, specification: min. spread 80mm, max. spread 300mm, reach: 300mm suitable for bearing 50mm id to 100 id (c) special purpose fixture of puller to pusher: - (1) pusher jaw 1 set of 03 nos. (2) pusher stud- m26*m16-700 long (2) pusher adaptor. all parts forged & hardened. make-ekta enterprises model no. hydraulic puller model hp041 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45329483

29 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Earth Moving Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors