Get complete information related to latest Earth Pit Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Earth Pit Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Earth Pit Tenders.
Tender For preparation of dpr of heritage site monuments site plan conducting of detailed survey rendering of service for providing of architectural structural design of rcc as per indian standard codes of practice and service for standard penetration test as
Tender For corrigendum : providing of design installation and maintenance of educational lab/centre - ict lab; site preparation, supply and installation of hardware, teacher training, other staff training, furniture, deployment of manpower, maintenance of hardware (amc/cmc), deployment o..
Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earthpit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get
Tender For supply of supply of conventional lightning arrestors , supply of insulated multi stranded 75 sq.mm. copper wire with copper lugs , supply of frangible fiber-reinforced plastic frp poles , construction of concrete base for erecting frp poles , construction of conventional earthing pits , supply of copper plate , supply of copper strip , supply of pvc pipe for earthpits , supply of earthing salt , supply of charcoal granules , construction of earthpit inspection chamber , supply of metal signage board , brazing points , installation work
Tender For st category: invited under earmarked works societies and individuals belongs to st communities are only eligible to participate this work providing earthpits for 132 kv jankampet feeder at 220 kvss renjal
Tender For providing of custom bid for services - outsourcing of services for refurbishment of victualling stores works include site preparation dismantling, debris removal, disposal of waste, scaffolding, transportation, housekeeping and site clearance
Tender For material and labour for construction of view cutting fence (2200 mtr) in ferozepur - site clearance complete all as specified and as directed. , excavating in trenches, not exceeding 1.5 m wide or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified & directed., , excavating in post holes each n. exc. 0.5 cum and getting out in soft lloose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm complete all as specified., , material and labour for providing cement concrete in foundations 1:4:8 type d2 (using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed, , material only for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed., , material and labour for providing cement concrete 1:2:4 type b1 using 20mm graded aggregate as in copping including weathering, slightly rounded or chamfered angles and necessary formwork complete all as specified and as directed, , material only for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed., , supply and fix rolled mild steel fe-410 (grade e-250a) angle or tee section as in post, cut to length and bend to shape as directed, fixed independetly without connecting plate etc, including provision of 05 to 06 nos gaps/outs/holes in each post for providing/laying ppgi sheet and one coat of red oxide zinc chrome primer after preparation of new steel surfaces complete all as specified and as directed., , supply and fix rolled mild steel fe-410-w (grade e-250) quality a framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as specified and as directed., , supply and fix of pre-painting galvalume sheets having pitch 190mm, depth 29mm and not less than 0.50mm thickness having tensile strength of 550 mpa (galvalume base-ppgl trapezoidal profile sheets) fixed with self tapping screws of size 75/100mm and aluminium washer of suitable size in view cutting complete all as specified and as directed.