Latest earth rammer scrap Tenders | Government earth rammer scrap Tenders

CTN :40135848

17 May, 2025 NA

Hooghly - West Bengal

Tender For supply of other section , m and l for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces width or girth exc 10 cm including preparation of surfaces all as specified and as directed. , m and l for three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and as directed. , s and f steel stainer for sewage sumps of different pores as specified and directed by engineer in charge , suppy of stand by non clogging pump of 5hp 1520 lpm with all accessories and fittings as specified and directed by engr in charge , heavy duty double tank type chemical dosing system consist of service tank 150 ltrs capacity with dosing system plunger type , s and f gi strip 25x4mm as earthing lead bolts nuts checknuts and washers all as specified and directed , material and labour for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick , pumping out sewage water from the existing sumps of sewage plant pump house with the help of non clogging of pump any kind capacity of pump set not less than 2160 lpm , lifting the non clogging pump set electrically operated by 15hp 20 hp 3 phase motor incl column pipe line shaft etc , dismantling of non clogging submersible pump of capacity 15hp 20 hp for comprerhensive maintenance and if required taking out burnout old winding from the stator , lowering complete the non clogging pumping set and reflixing the motor carefully including connection and testing , pumping out sewage water from the existing sumps tanks of stps mbbr technology with the help of non clogging , cleaning of 1.2 mld sewage treatment plant after pumping out sewage water from the existing sumps , lifting the non clogging submersible pump set electrically operated by 3.7 hp 3 phase motor incl column pipe line , dismantling of non clogging submersible pump of capacity 3.7 hp and taking out burnout winding from the stator of motor and rewinding with pvc copper wire , dismantling of electric sewage induction motor 3.0 hp ac 3 phase 415 volts from site after disconnecting from pump , dismantling non clogging pump set of centrifugal type 3.0 hp induction motor ac 3 phase 415 volts , dismantling of electric induction blower motor 5.0 hp ac 3 phase 415 volts for comprehensive maintenance from site after disconnecting , dismantling of electric induction blower motor 30.0 hp ac 3 phase 415 volts for comprehensive maintenace from site after disconnecting from blower electric connection , material and labour for pcc 1 3 6 type c2 using 40mm graded stone aggregate for foundation etc , m and l for taking out comprehensive maintenance of existing unserviceable air blower of any make of capacity 125 cubic hr to 188 cubic hr with taking out of electric cable , supply only gear oil ep 90 complete all as specified and as directed by engineer in charge. , supply only air filter suitable for existing one complete all as specified and as directed by engineer in charge. , supply only belt as per existing model complete all as specified and as directed by engineer in charge. , supply only bearing as per existing complete all as specified and as directed by engineer in charge. , supply only set of rotor with hub as per existing model complete all as specified and as directed by engineer in charge. , m and l for finding out defect of stps panel and taking out burnt interconnection wiring including u.s and serviceable component for re use including rewiring of panel , supply and fix in repairs flexible flat pvc copper couductor stranded submersible cable cores 1100 volt grade 4 sqmm 3 bid details/ 2 / 41 core , supply and fix in repairs flexible flat pvc insulated pvc couductor stranded submersible cable cores 1100 volt grade 10 sqmm 3 core , s and f round strand steel wire rope dia 12 mm and connected clamp nut bolts fixed complete all as specified and as directed by engineer in charge. , s and f submersible pump ful

Central Government/Public Sector

CTN :40118751

09 May, 2025 3.57 Crore

Jharsuguda - Odisha

Tender For providing of operation and maintenance of other machines and plants - comprehensive maintenance contract for the input coal feeding arrangement to washery (i.e. part of chp from reclaim feeder complex up to conveyor discharge chute at th-3) of lakhanpur ocp of lakhanpur area with allied auxiliary facilities such as all the associated systems and sub-systems like power supply, internal and external illumination, control & instrumentation, communication system, dust suppression system, firefighting and plant cleaning systems, pressurization & air conditioning system, ventilation system, material handling system (lifting tackles, hoist, monorail etc.), signaling & alarm system, control & monitoring system, plc, earthing & lightning protection system, sampling system, etc. of ilbl ocp of lakhanpur area, mcl.

CTN :40118886

15 May, 2025 NA

Hyderabad-T - Telangana

Tender For supply of retroftting of filament and repair of spares - controller module of cnc operator panel , display unit controller of cnc system , handheld wheel unit for axes controller of cnc system , keyboard of cnc control system , single motor module of 4-axis cnc filament winding machine , simodrive er module of cnc lathe machine , simodrive ir module of cnc system , sitop for power supply to cnc system , linear and rotational axes cnc controller , material lifting system , mobilized composite chips collector unit , composite material transporter , conditioning system of cnc controller panel , overhauling of centralized composite machined dust collector system , overhauling of filament winding machine , axis control card

CTN :40118898

15 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of mine lifting bag 1000 kg system compl with accessories/tools ( eh1301v-mv-1000-s) , mine lifting bag 500 kg system compl with accessories/tools ( eh1301v-mv-500-s)

Central Government/Public Sector

CTN :40123056

20 May, 2025 NA

Multi City - Multi State

Tender For supply, installation, testing, and commissioning of a heavy-duty vfd (variable frequency dri ve), 0.75 kw (1 hp), 380 to 460v, of schneider make or any other suitable make, for the hydraulic lifting pla tform of an 8-wheeler tower wagon. the firm shall integrate the item with the existing system. the materi al is to be supplied to sse/trd/brgw. contact: 9340696616. [ warranty period: 30 months after the dat e of delivery ]

CTN :40095590

30 Apr, 2025 NA

Kanpur - Uttar Pradesh

Tender For greasing of lifting equipments of gate no. 01 to 05 at shahzadbodh, applying chyrope mecardium compound, radian reduction, oil filling in gearbox and repair of lt panel, repair of central tender drive, panel rubber sealing, replacement of nut bolts, servicing of em brake, repair of engaging-disengaging system and alignment of gate no. 02 to 05 work as per bill of quantity.

CTN :40095599

01 May, 2025 NA

Kanpur - Uttar Pradesh

Tender For greasing of lifting equipments of gate no. 1 to 8 at pahunjabodh, applying mecardium compound on wire rope, oil filling in radian reduction gearbox, greasing of main roller, greasing of side sway roller, repairing of central handdrive, servicing of em brake, repairing of engaging-disengaging system and alignment work of gunny no. 2,45,7 as per bill of quantity.

CTN :40107348

19 May, 2025 NA

Jamalpur - Bihar

Tender For supply and fitment of side wheel & rear wheel components and spring-loaded wheel arrange ment system for 25ton universal jmp-jack with base plate for free movement of jack, with very easy fitmen t of lifting claw to the pad during lifting. during off load the jack to rest on wheel and during load the jack s hould automatically transferred on base frame with complete mechanical arrangement as per jmp sk. no.- 25t/jmp/jack/01/2024 qty.: - 01 set consisting of 5 nos. (for 1 no. consisting of all items as per mentioned drawing). [ warranty period: 30 months after the date of delivery ]

CTN :40107357

19 May, 2025 NA

Jamalpur - Bihar

Tender For supply and fitment of side wheel & rear wheel components with spring loaded wheel arrang ement system for 35ton jmp-jack with base plate for free movement of jack, with very easy fitment of liftin g claw to the pad during lifting. during off load the jack to rest on wheel and during load the jack should aut omatically transferred on base frame with complete mechanical arrangement as per jmp sk. no.- 35t/jmp/j ack/01-2024 and sprocket & chain which comprising of components as per drawing sk no. 35t/jmp/jack/2 8/2017, alt-2 make for chain: diamond or renond xd or tripcon engineering. qty.-01 set consisting of 05 n os. (for 01 no. consisting of all items as per mentioned drawings). [ warranty period: 30 months after the date of delivery ]