Latest earth rod Tenders | Government earth rod Tenders

CTN :40644660

02 Jul, 2025 NA

Darjeeling - West Bengal

Tender For bid to ras supply of power cable 10 sqmm 2 core , invertor bty 12 v 150 ah , led bulb 9 w , bed lamp , mirror light , water motor sensor , electic wire 2.5 sqmm , led bulb 18 w , led tube light 18 w , copper cable 1 sqmm , copper cable 1.5 sqmm , copper cable 2.5 sqmm , exhaust fan , led bulb for security light , led bulb 20 w , bulb holder , pendent holder , socket 3 pin 5 amp , socket 3 pin 15 amp , switch 6 amp , switch bd , switch 3 amp , change over 32 amp , change over 63 amp , change over 100 amp , mcb 63 amp , mcb 32 amp , mcb 16 amp , cassing capping 1 inch , cassing capping 2 inch , water despencer , led bulb 15 w , led tube light 22 w , socket multipurpose 15 amp , switch 15 amp , 3 pin socket 5 amp , 5 pin socket 15 amp , tape insulation , pvc switch bd 6x6 inch , pvc switch bd 6x8 inch , modular switch socket 15 amp , high mast light , cable pvc insulated aluminum conductor 2 core 4 sqmm , cfl bulb , pvc switch bd 4x4 inch , switch piano type , pvc switch bd 7x4 inch , security light , bulk head fitting 100w complete , screw driver large , tubelight 40 w , led bulb 40 w , plug top 3 pin 5 amp , plug top 3 pin 15 amp , led street light 30 w , bed switch , cable aluminum strand 2 core 6 sqmm , flexible wire 2 core , earthing rod , gi earthing wire , electric compound , copper prong , nut bolt for lc , aluminum plate , salt , pole , plastic pit cover , cement , hollow block

Central Government/Public Sector

CTN :39963024

15 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : rate contract for supply of imported spares of caterpillar engines in eastern and northern regions of ongc work centre for a period of five 05 years - resistor, lamp, dm bulk seal, boss, seal, plug-cup, gasket-exhau, filter as, seal, bushing, pin, alternator g, nut, seal o ring, shield as-ma, coupling, adapter, washer, shield as-el, base as o, lamp gp-floo, case, alternator g, rod as-conn, washer, body, nipple, ball, union, washer, seal-lip typ, hsg-regulato, micrometer, gear, pulley, plug-spark, harness a, washer, gasket as kt, seal-lip typ, belt, screw as, bracket, pin, plug as-conn, gear kit idl, head as, seal-lip typ, bolt, elbow-oclr i, ring, wire as, strap-step, block, towel-shop, clip, head gp-cy, head gp-cyl, clamp a, box as, shim gp-gen, bolt, shim-liner s, gasket, pin-spring, bushing, guard-rad lh, terminal kit, fitting, pin, washer, gasket, spacer, spacer as, head gp-cyl, hinge as, clamp, gear, gear, gasket, filter a, plug as, bolt, fluid-urea, orifice, spring, screen, housing as, cap a, shaft as, gasket, guard as-cor, gasket, bonnet, adapter-exh, strap-cable, gasket, insulation, screw, seal o ring, cont gp-elek, cap as, cap a, terminal-dou, cover-air in, packing, gasket, seal-o ring, tool gp, mount, screw, nut, cap a, shim pack, cushion kit, plug a, plug, cap as.-o fl, cap end, shutoff gp-b, kit cover, spring, mount-shock, clip, plug, kit hardware, shell a, guard, manifold gp, frame as-lh, frame as.-rh, spacer, gasket, seal, adapter, core a rad, guard, bracket, washer, roller a, fitting, dowel, seal a, plate, coupling, stand-eng, muffler as, seal-o-ring, seal, shim pack, bolt, bolt, capscrew, race&rlr as, pin-piston, bracket as., bolt, bolt, bolt, gasket, manifold as-, manifold gp, mount, bellow as., radiator kt, base a, elbow, cap a oil, cap oil f, mount, pin, filter a, guard, elbow, cap-wiper, cap as-fill, filter a, mount, bottle as., washer, cap as-fille, tube a, washer, guard-core, gasket, screw-sems, solenoid gp, cap-radiator, gasket kit, guard, bellows as, nut-m40, gasket, washer, guard as, solenoid as, manifold, seal, base-relay, body as-pist, elbow, adapter, coupling, cm-tube stk, cm sleeve bk, kit body, plug, rotocoil a, exciter, turbo gp-bas, ring, turbo g, turbo gp, bracket a, core gp, core as, arm a, sensor, actuator as, cotter pin, harness as, head gp, head gp-cyl, filter a, lockwasher, knob, gasket, radiator gp, element, gasket, harness as, seat wear, gasket, line as, governor gp, line as, cartridge g, elbow, elbow a, exchanger g, filter-fuel, housing a, injector g, lifter as, line as, line as, line as, lubricator g, plunger as, core a, gear, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, core as-oclr, manifold as, pump gp wtr, sender as, gasket, line as, repair kit, pipe, rack, line as, gasket, valve a, harness as, pump gp, gasket, screw-pan he, gasket, gasket, nut, harness as, valve g, nut, piston as, head gp, valve-exhaus, bolt con rod, guide-valve, bracket, elbow, retainer, gasket, adapter, seal as, elbow, gasket, cover, cover, head as-cyli, liner-cylind, head gp-cyl, rod as-conn, shaft, valve, camshaft a, guard-core, washer, screw, bolt as-conn, cap dust, bolt, shield, gasket, connector, socket-relay, housing, cont gp, cont gp - b, core as-ht e, adapter, housing, turbo gp-bas, cartridge gp, connector, valve gp-fue, retainer, governor g, cont grp, cover, elbow, elbow, housing, elbow, pin, base oil, bracket, elbow, washer, capscrew, cap screw, lockwasher, mount shock, insulator, spring, rod a, ferrule, rotocoil a, spring, mount a, camshaft as, bolt, lock, radiator gp-, guide-valve, valve-intake, retainer a, guide-valve, guide, insert, bolt-groun b, lock, ring-top, insert, ring as pist, ring g, valve, valve, retainer, body assy, ring-piston, piston ring, body as-pist, valve, valve inlet, insert seat, body as-pist, liner cylind, body a, kit-gasket, pin-piston, spring, spring, washer, screw-adj, valve exhaus, kit-gasket-m, guide, sp

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

CTN :40858606

02 Jul, 2025 6.00 Lacs

Kanpur - Uttar Pradesh

Tender For m and r work under edd- rania -- loading 8.5 m long pcc pole from electricity storage centre jainpur on own vehicle and taking it to work site and unloading it safely through unpaved road. a loading 11 m stp pole from electricity storage centre jainpur on own vehicle and taking it to work site and unloading it safely through unpaved road. a transport of electric line material like conductor, clamp, nut-bolt wire, lt cable, stonepad, station set, xlpe, abc etc. to the specified place by own vehicle for an estimated distance of 75 km through unpaved road. a digging pit at the place of broken/damaged poles and installing pcc poles by tying all accessories like cross arm, disc, pin insulator etc. and fitting earthing rod. a tying all accessories as per requirement in the long span in the middle of the already constructed line. the work of re-energizing by installing additional pcc/stp poles as per the prescribed standard/specification of response link. a the work of re-energizing by installing additional pcc/stp poles as per the prescribed standard/specification of response link while tying all the accessories as per requirement in the middle long span of the already constructed line. a installation of new section double pole in place of broken/damaged double pole. a grouting work of pcc/stp poles as per respo standard. supplying cement, ballast, gravel in the ratio of 1:2:4. repairing section double pole. tightening damaged stays by renosing. tightening the white wires of 33 kv line, each wire and tightening the white wires of lt and 11 kv line, each wire. straightening the skewed poles of 33 kv line/11 kv line/lt line as per respo standard and tying all accessories and erecting them correctly. giving clearance by trimming the trees of 33/11 kv and lt line. spreading the acsr vessel conductor in 33/11 kv line and tying stringing and sagging insulators in all the three phases and jumpering and earthing each wire. replacing damaged cross arm.send feedbackside panelshistorysaved

CTN :40859261

02 Jul, 2025 25.00 Lacs

Kanpur - Uttar Pradesh

Tender For deposite work under edsd- rania - carriage of following material from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work., 8.5 mtr pcc pole, 11 mtr stp, different line material ( conductor, x-arm,channel, insulator , g.i. wire , stay wire & rod, earth rod , db box etc.), different capacity dt( 100/63/25/16/10 kva ), pilfer unit , ct/pt double metering unit ., erection of following material :, x-arm holding clamp / holding clamp with n&b, f- clamp with n&b, i/d & o/d type cable jointing kit suitable for 11 kv xlpe cable ( different size), stay insulator, g.i. pipe 6" dia, stone pad, anti climbing device as per respo norms ( with barbed wire ), danger board as per respo norms., erection of following material including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work. (with proper earthing.), single pole structure of 8.5 mtr pcc pole, single pole structure of 11 mtr stp pole, double pole structure of 8.5 mtr pcc pole, double pole structure of 11 mtr stp pole, stay set, laying of 11 kv xlpe cable (different size ) as per respo manual and as per direction of je inchrge., laying of 11 kv xlpe cable (different size ) inside g.i. pipe ., laying, sagging, stringing, binding and jumpering etc. of weasal/racoon /dog conductor on the newly erected pole/ old pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work., grouting of pole as per respo norms ( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ), grouting of stay set( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ), muffing of s.t.p. as per respo norms ( require material will be provided by contractor ), dismantling of existing 33kv/11 kv / l.t. line and removal of all accessories & fittings from poles, re-rolling of conductor and proper stacking and cartage of dismantled conductor & accessories from site of work to dvvnl, store., making joint with the help of cable jointing kiit (11 kv ), mounting of d.t. (100/63/25/16/10 kva ) upon double pole as per respo manual., installation of ct/pt unit as per respo manual., installation & grouting of pilfer unit as per respo manual., cutting of tree branches for clearness of line.

CTN :40853759

05 Jul, 2025 3.97 Crore

Rajkot - Gujarat

Tender For construction of un-reinforced dowel jointed plain cement concrete pavement work for cleaning & drying area at south side ground area, sr. no. 261/p, apmc, main market yard, vill.: bedi, rajkot (2nd attempt)

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862068

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 04/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 02 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862072

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862073

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 08/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 06 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

Earth Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government