Get complete information related to latest Earth Strip Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Earth Strip Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Earth Strip Tenders.
Tender For repair and replacement of unserviceable parts of dg set, corroded panel, repair of earthing strips, unserviceable sign board, lighting conductor, pcc works, stp and rewinding of motors including allied works at bagrakote mil stn under ge sevoke road
Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl
Tender For corrigendum : supply of providing and fixing 50 mm outer dia pipe and 25mm inner as per boq item no.3.6.1 , providing and fixing 8 swg gi earthing wire supply and laying as per boq item no.3.6.2 , providing and fixing 25 mm x 6 mm gi earthing strip supply and laying as per boq item no.3.6.3 , providing and fixing, supply and installation 150 mm wide cable tray as per boq item no.3.7.1 , providing and fixing, supply and installation 300 mm wide cable tray as per boq item no.3.7.2 , providing and fixing, wiring for lightor bell point with 2-1.5 sq.mm and earth wire of 1.5 sq.mm as per boq item no.3.8 , wiring for looped light with 2-1.5 sq.mm and earth wire of 1.5 sq.mm green both are of isi marked approved as per boq item no.3.9 , providing and fixing,wiring for fan or exahust fan or wall fan point with 2-1.5 sq.mm as per boq item no.3.10 , providing and fixing on board 6a, 5 pin socket controlled by 6a switch as per boq item no.3.11 , providing and fixing 6or16a, 5 pin socket controlled by 6a switch as per boq item no.3.12 , providing and fixing 6or16a, 5 pin socket controlled by 6a switch - single phase as per boq item no.3.13 , providing and fixing 6or16a, 5 pin socket controlled by 20a moduler sp mcb as per boq item no.3.14 , providing and fixing 2 x 1.5 sq.mm and 1 x 1.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.1 , providing and fixing 2 x 2.5 sq.mm and 1 x 1.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.2 , providing and fixing 2 x 4 sq.mm and 1 x 2.5 sqmm. copper wires with 25 mm dia frls conduit as per boq item no.3.15.3 , providing and fixing led rope lights as per boq item no.3.16 , providing and fixing 36w led 600mm x600mm fixture as per boq item no.3.17 , providing and fixing 18w led down lighter openor concealed as per boq item no.3.17.1 , providing and fixing 12w led down lighter openor concealed as per boq item no.3.17.2 , providing and fixing 10w led linear spot light as per boq item no.3.17.3 , providing and fixing 6worm strip light as per boq item no.3.17.4 , providing and fixing 2worm strip light as per boq item no.3.17.5 , supply installation testing and commissioning of 1200 mm 50w five star ratting as per boq item no.3.18.1 , supply installation testing and commissioning of 914 mm 60w five star ratting ceiling fan as per boq item no.3.18.2 , providing and fixing 32 mm dia. pvc conduit as per boq item no.3.19.1 , providing and fixing 25 mm dia. pvc conduit as per boq item no.3.19.2 , providing and fixing 100x50 mm pvc raceways white as per boq item no.3.19.3 , providing and fixing 50x50 mm pvc raceways white as per boq item no.3.19.4 , providing and fixing,supply, laying of cat 6 utp computer wire with conduit as per boq item no.3.20.1 , information outlets - providing and fixing,supply, installation testing and commissioning as per boq item no.3.20.2 , providing and fixing,sitc of cat6 24 port patch panel rack mount with lable as per boq item no.3.20.3 , providing and fixing,sitc of cat6 patch cord for patching at user desk 1-mtr. as per boq item no.3.20.4 , providing and fixing,sitc of cat6 patch cord for patching at user desk 2- mtr. as per boq item no.3.20.5 , providing and fixing,sitc of 6u wall mount rack for mounting devices with all required as per boq item no.3.20.6 , providing and fixing 2-module modular switchboard plates as per boq item no.3.20.7 , providing and fixing 4-module modular switchboard plates as per boq item no.3.20.8 , providing and fixing 6-module modular switchboard plates as per boq item no.3.20.9 , providing and fixing 8-module modular switchboard plates as per boq item no.3.20.10 , providing //bid details 3 / 84 and fixing 12-module modular switchboard plates as per boq item no.3.20.11 , providing and fixing,supply, installation testing and commissioning of rj 11 jack type as per boq item no.3.20.12 , providing and fixing,supply and installation of interactive panel as per boq item no.3.21 , providing and fixing,supply an
Tender For repair, replacement, improvement and maintenance of unserviceable earthing, earthing strip, sign board including allied works at various locations of sevoke road mil stn under ge sevoke road
Tender For corrigendum : painting of transformer, ct and pt, m.s. earthstrips, fire buckets, fire stands and other equipments at 132 kv sub-station dumariyaganj under electricity transmission division-ii, basti
Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh
Tender For supply of point 5 kva genr set with trolly mtd - supply installation testing and commissioning of 58 point 5 kva cpcb iv compliant genset make kirloskar cummins koel green greaves power or of equivalent under job no 3025 , fabrication and supply of 4 wheeled trailer complete all as specified and directed , on load change over switch metal enclosure 415 volt amps 50hz ac 4 pole 100 amp capacity with side handle confirm to is 13947 part 3 2607 make gloster plaza paragon equivalent , cable xlpe insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable heavy duty 1100 volts grade with multi stranded aluminum conductor , mobile earthing electrode of size 65 mm dia 1.2 mtr long body materials ss 304l central conduction spl corrosion complete with copper lugs and nuts bolts and washers , gi pipe light grade of size 40 mm dia for protection of earthing strip make jindal tata kaliga , copper strip of size 32 x 6 mm for earth continuity conductor
Tender For corrigendum : supply of spares for instrumentation - "vfd pannel signal isolatorsr. no. 2306042013 make - multispampower supply ac 230 vi/p - 4 to 20 ma dco/p - 4 to 20 ma dcreguire boiler + mill + boiling house ", ash handling air pneumetic vibrator, pu elbow 1/4" one side thread - 10 mm, pu tee 1/4" one side thread - 10 mm, air filter 1/4" -10 mm, pu femal connector 1/4" - 10 mm, pu pipe-10 mm, sov double action 230 v ac 1/4", quick exhaust valve 1/2" cylinder, quick exhaust valve 1/4" for seal, "simens smart positioner sipart ps26 drs 110-0nn0- 0aa0ip 66/type 4xp- 1.4 to 7 barta- 30 dg c to +80 dg c", "dome power cylinder for ash handling model no. c 0631505sr. no. plt 20815/005 bore size 63mmstroke- 305 mmmake- duncam engineering limited (rnoia)", " turbine asco solonoide valve (red had type)brand ascotype - solonoide valve (electrno megnetic) 110 v dc", "limit switchmod no. lswp -1-02-4-a", "cesar bonettitype directional control valvesize / model- nf2pan 520 n00000", "valve limit switch box/ position monitormodel code klplubtg/16/05-26ingress protection- ip67 certifiedvoltage- 110 vdc", "wiring diagram explanation (013)type- close position switch", "product - cee em-45 limit switch model /type - cee em -45-50brand-jai bala ji", "pressure switch (switzer) model no. gm-201-33-b030-55-apressure range 0.4 to 4 bar", "proxy meter sensorsr. no. 23 h01p90output- 7,87 v/mm (200 mv/mil)w/o- 2456make - bently nevada", "siemens smart positioner sipart . ps26dr5 110-0nn0-0aa0ip 66/type 4xpr 1.4 to 7 barta 30 dgr c to +80 dgr c", "m00g pi servo amplifier ( valve driver)supply voltage - 24 vdccurrent 1 to 2 a", "signal conditioner/ isolatermake- pepperl +fuchs model - kfd2- stc5-1.20type- signal isolator/signal conditioner", boiling house hi tech m/c chennai bag clamping power cylinder with o ring kit, bag clamping rubber pad, limit switch for clamping, "plc omran dc - 12 v to 24 v zen 10 c dr - d- v2", smps (power supply 24 v), relay board channels, contector, controller unipluse f 701-s, pu connectors, male 1/4" - 8 mm, push button element no-nc, air filter regulator (afr) (0-10 bar), afr connectors, "load cell 110 kgmodel- 65023-110k-nc-02x make- vishay", proxy for load bucket, load bucket cylinder with kit o ring make janties, course fine cylinder with o ring kit make janties, sov ( solonoide valve) with base and coil make janties coil 220 v ac, coil only 220 v ac, load cell card hi- tech engineers, half inch ball valve (1/2"), "centrifugal machine (raw and refinery) afr (air filter regulator )connector femel - 3/8"" make janties ", "break limit switch make bch electric limited", solenoide valve (sov) single acting single coil with o ring kit, double acting double coil with coil 230 v ac and o ring kit, double acting single coil with coil 230 v ac and o ring kit make energy tech high tech pneumatic, coil 230 v ac for sov, hand operated pnumatics sov wtp high tech engineering, proxy type pnp supply 10-30 v type ps 2000 d make joy shree pune, pug mill valve sheet ( on/ off) size - 300 mm make aira, syrup seperator valve (on/ off) size 150 mm make - i& s system dehradun, r- valve pnumatic 1/4", boiling house refinery mbf control valve- 3" rubber seat, mbf on/off valve- 4" rubber seat, mbf on/off valve- 6" rubber seat, mbf on/off valve 3" rubber seat, melt concentrator 2" rubber seat hot water valve , 0-150 dgr c rtd pt-100 temp transmitter (tt), refinery ph electrode with transmitter, abb flow meter 3" model no. fep 63 y0a20080 a size 3", melt concentrator control valve 12" rubber seat , melt concentrator control valve 10" rubber seat , level transmitter (lt) make abb range 0-5000 mmwc remote seal type, control valve positioner make rotex model rtx 1000 -r-d-2-r1-2g-4r-nd-c-41 serial no. rtx/22/0873, multimeter make fluke, loop calibrator / milium source make masi bus, boiling house and boiler compressor k smart oil 200 l , oil filter element 150 lpm, air filter element, air oil seprator element kit, gasket , air oil seperator ele