Get complete information related to latest Earthing Brush Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Earthing Brush Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Earthing Brush Tenders.
Tender For corrigendum : maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm di
Tender For supply of msu related earthingbrush of three phase bhel traction motor type im3302az/bz [ warranty period: 30 months after the date of delivery ] ]
Tender For bid to ras supply of field water supply scheme c c - gi pipe 75mm and 10 ft length , gi socket 75mm , gi l bend 75mm , gi t bend 75mm , gi nipple 75mm , gi reducer t bend 75mm and 25mm , gi union 75mm , gi end cap 75mm , gi pipe 25mm x 10 ft length , gi l bend 25mm , gi t bend 25mm , gi socket 25mm , gi union 25mm , gi tank connector 25mm , gi gate valve 25mm , gi gate valve 75mm , float valve 25mm , gi nipple 25mm , gi flanges 75mm with leather washer , gi solution m seal 100gm , daga motawala , upvc pipe 75mm x 10 ft , upvc socket 75mm , upvc solution 500gm , water tank 5000 ltrs , 12.5 hp high head pump with starter , 1.5 hp pump , 1 hp pump , mcb 20 amp , twin core 10 sqmm wire , cement , sand , 20mm aggregate , 40mm aggregate
Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or
Tender For supply of mobile portable toilet , upvc elbow 1 inch dia , upvc tee 1inch dia , upvc tee 15mm , upvc pipe 15 mm dia 3mtr length , upvc ball valve 1inch dia , upvc female threaded adaptor fta 1inch , upvc pipe 40 mm 3mtr long , upvc socket 40mm , upvc reducer 1inch x 1 by 2 inch , pvc waste pipe 32mm , upvc pipe 25mm dia 3mtr long , upvc socket 1inchdia , wash basin , upvc solvent 100 ml , health faucet shower jet , wash basin coupling 32 mm