Get complete information related to latest Earthing Chamber Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Earthing Chamber Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Earthing Chamber Tenders.
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut
Tender For fixation of local market rate(including gst and cess) for implementation of different scheme under mgnrega at khoyrasole dev. block and 10 nos of gp under khoyrasole dev. block for the year 2026-27 - mgnrega materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, brick bats, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less litrethan 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 litre gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, stone dust, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, wire mesh (rabbit), diesel oil, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia, g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, r.c.c. pipes np2 class 250 mm dia, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 600 mm dia, r.c.c. pipes np2 class 900 mm dia metre, r.c.c. pipes np2 class 1000 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm intel 100 mm dia, vitreous china squatting plate urinal, h.p. or l.p. ball valve with polythene floats: 15 mm dia, h.p. or l.p. ball valve with polythene floats: 20 mm dia, h.p. or l.p. ball valve with polythene floats: 25 mm dia, brass full way valve with c.i. wheel (screwed end) 25 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rests 250x125x25 mm, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body each, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type), circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal te
Tender For bid to ras supply of shelter parts and other items for store shelter 2135c - shelter parts complete for store shelter , pcc cement is 1489 , coarse sand , 20mm aggregates , 40mm aggregates , hardcore 63mm stone aggegates , pcc solid block 400 into 200 into 200mm , chequered cement concrete tiles of size 250 into 250 into 25mm thick , industrial heavy duty full body vitrified ceramic 600 into 600 into 16mm tiles , tmt bars 8mm dia , tmt bar 10mm dia , water proof plywood 8 into 4 feet into 18mm thick , wooden scantling 50mm into 50mm into 3 mtr long , nails assorted size 2 inch 3 inch and 4 inch , binding wire zero point 9mm , white cement , water proofing compound , lime unslaked of best quality , earthing set complete with accessories as per appx i of ts , lc set complete with accessories safe chemicals as per appx i of ts , led battern surface 4 feet long 15 w output 1600 lumens , pixel bulk head fittings led lamp 15 watt , led 12 watt rechargable emergency inverter led bulb complete with inbuilt battery , cealing fan 1200mm with regulator conf to is and with fan hook ms clamps , pvc insulated heavy duty 1100 volt grade cable 6 sqmm twin core aluminium conductor isi marked , porcertain insulating hangers , pvc sheathered unarmoured standrad conductor cable of size 1 sqmm conf to isi marked , pvc sheathered unarmoured standrad conductor cable of size 1 point 5 sqmm conf to isi marked , pvc sheathered unarmoured standrad conductor cable of size 2 point 5 sqmm conf to isi marked , pvc sheathered unarmoured standrad conductor cable of size 4 sqmm conf to isi marked , modular switch piano flush type 6 amps 240 volts single pole one way isi marked , modular switch piano flush type 16 amps 240 volts single pole one way isi marked , modular socket outlet multipurpose 2 in 1 of 6 and 16 amps flush button type isi marked , modular socket outlet multipurpose 2 in 1 16 amps flush button type isi marked , surface ) /bid number : gem/2026/b/7592587 * /dated: 27-05-2026 & & / bid document 1 / 44 & & ' ' /item category mounting modular boxes suit for switches 12 module of size 8 inch into 6 inch , surface mounting modular boxes suit for switches 8 module of size 8 inch into 3 inch , combined cover plate with frame inner and outer of 12 module , combined cover plate with frame inner and outer of 8 module , cealing rose with square box 65 into 50mm 2 to 3 terminals , pvc flexible nibbed pipe 20mm dia , mcb db 06 way spn 240 volt conf to is 13032 , mcb 10 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 20 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , mcb 32 amp sp 240 volt breaking capacity 10 ka conf to iec 60898 , pvc casing caping 38mm wide not less than 2 mm thick , pvc coupler for 38mm casing and caping pipe , pvc tee for 38mm casing caping pipe , pvc sockets for 38mm casing caping pipe , pvc corner bend for 38mm casing and caping pipe , pvc elbow for 38mm casing caping pipe , pvc junction linker 75 into 75mm , house service bracket hook type complete with 3 mtr long gi pipe 40mm dia and ms hooks clamps ans stay , pvc conduct pipe 20mm dia isi marked , pvc coupler for 20mm dia coduict pipe , pvc elbow for 20mm dia conduict pipe , pvc space bar saddles for 20mm dia pvc pipe , insulation tape 19mm width 25mm long , no 8 into 19 csk screw full threaded , no 8 into 32 csk screw full threaded , no 8 into 50 csk screw full threaded , no 8 into 75 bolt and nuts full threaded , store rack as per specification given in appx c of ts , chair writing as per specification given in appx d of ts , writing table as per specification given in appx d of ts , almitrah steel as per specification given in appx d of ts , hand held trolley as per specification given in appx d of ts , hand held fire extinguisher as per specification given in appx d of ts , smoke alarm as per specification given in appx d of ts , heat alarm as per specification given in appx d of ts
Tender For corrigendum : providing and laying integral water proofing treatment over the terrace by dismantling damaged condemned dilapidated pressed clay tiles and lime concrete including petty repairs etc. at akashvani office block at raichur karnataka and repairs and renewal of gents restroom and ladies restroom in ground floor & gents rest room in first floor of studio block at akashvani, raichur, karnataka.
Tender For towards the cost and supply of lime in air tight plastic bag, gud (jaggery) , gallnut, dhrangadhra stone blocks of different size, removal of cement concrete floor laid in place of stone flooring with original bed concrete ,etc. as mentioned in boq.
Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol
Tender For material supply for works in mgnregs action plan - material supply for mgnregs individual and common asset creation - stone aggregate:40mm nominal size, stone aggregate:20mm nominal size, stone aggregate:10mm nominal size, stone aggregate:06mm nominal size, course sand(zone3), portland cement, concrete mixer, vibrator, stone for masonry work, twisted steel/deformed bars, structural steel such as tees,angles,channels and r.s joists, second class kail wood in planks, second class kail wood in scantling, wall form panel 1250*450mm, corner angle 45*45*5mm 2.5long, column clamp 450*1070mm, prop 2m(2-3.5m), laterate stone of size 40*20*15cm, solid block of size 30*20*15cm, mild steel plates, mild steel rivets, flats up to 10mm in thickness, 20 mm dia.holding down bolts, mild steel sheets for tanks, galvanised wire mesh, iron pintels including welded pin, mild steel sheets with bolts and nuts, mild steel hooks, gi trafford profile sheet 0.35mm thick, galvanised steel jor l hooks 8 mm dia, galvanised steel bolts and nuts 6mm dia and 25mm long round head with slots, wire nails, fine sand, pvc pipe 63 mm outer dia., pvc bend 63 mm dia., pvc pipe 110mm outer dia., pvc elbow 63 mm dia, pvc tee 63*63*63 mm dia, pvc end cap 63 mm dia, pvc reducer 63*50mm dia, pvc pipe 160mm outer dia., gi pipes 50 mm dia., gi pipes 40 mm dia, quarry waste, precoated galvanised plain ridge, vitrified floor tile 60*60cm, welding by electric plant, hire charge of 10hp engine and pump set, diesel oil, 200 mm aluminium aldop, pvc socket/coupling 63 mm dia, polythene water storage tank, red oxide zinc chromate primer, deharadun white lime, smooth wheeled roller 8 to 10 tonne, water tanker 5 to 6 kl capacity, interlocking c.c. paver block (80 mm thick, m-30), sundries
Tender For supply of pbs roll terflet 1m wide and 20m long , pvc service tank 1000 ltrs cap sintax , super flash strip bitumen tape size 2 inch , float valve 15mm plastic prayag , pvc laminated gypsum board size 600mmx600x6mm , armstrong mineral fiber acoustical ceiling board 600x600x18 mm tiles , pvc service tank 500 ltr sintax , float valve 20mm plastic prayag , coarse aggregate 12.5mm graded , silicone sealant with gun clean colour , gi tee 1.5inch 15mm , e- board ceiling 4mm thick size 600x600mm , gi tank nipple 15 mm x 300 mm long , pvc pipe 50 mm dia length 3 mtr , tank cover 1000 ltr , pvc pipe 75 mm dia length 3 mtr , pvc pipe 100 mm dia length 3 mtr , gi nipple dia 15 mm dia 150 mm length , rotary hammer masonary drill bit set of 3 pcs 25mm, 30mm and 40mm , m seal water based , brush for paint 6 inch , cement in 50 kg pack , pgi sheet 22 gauge , screw wood 25 mm 100 nos per pkt , elbow pvc 75 mm dia , synthetic resign adhesive fevicol , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , gi socket 15 mm dia , drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm , screw wood 15 mm , tank cover 500 ltr , drill bit for concrete set of 5 pcs , gi elbow 1.5 inch 15mm , screw wood 35 mm , white cement in 1 kg pkt , gi uniion 1.5inch 15mm , elbow pvc 100 mm dia , screw wood 20 mm , brush for paint 4inch , elbow pvc 50 mm dia , vaccum cleaner blockage cleaner rubber type , gi nipple 15 x 50 mm long , gi nipple 15 mm x 100 mm , coarse aggregate 20mm graded , sand , gi tank nipple 15mm , screw wood 25 mm , screw wood 40 mm , screw wood 75 oblique 80 mm , gi socket 20 mm dia , termite killer 500 ml container , brush for paint 2inch , nails wire 2inch 50 mm , nails wire 1.5 inch 40 mm , nails wire 4 inch 100 mm , nails wire 3inch 80 mm , nails wire 1inch 25 mm , panel pin 1 x 17 mm , hack saw blade , brush for paint 1inch , gi plug 20mm , lime , emery sheet abb cloth no 80 , gi nipple 15 mm x 75 mm , nails wire 2.5 inch 60 mm , dr fixit water proofing liquid 101 lwt , gi tank nipple 20mm , nails 5inch , nails 6inch , gi plug 15mm , urinal flat back 390 x 375 x 590mm parryware , brass sliding bolt 300mm , gi wire mesh 0.63 mm dia 15mtr each roll 1.40 mm apreture , pvc waste pipe 32mm for sink 900mm long , brass bow handle 150mm //bid details 2 / 60
Tender For tender for supply of wall painting with acrylic emulsion paint , providing and applying white cement based putty , 15 mm cement plaster , painting with synthetic enamel paint , 6mm cement plaster of mix , providing and fixing ist quality ceramic glazed wall tiles , white washing with lime , earth work in excavation , providing and laying in position specified grade of reinforced cement concrete , providing and laying in position specified grade of reinforced cement concrete , steel reinforcement , centering and shuttering , structural steel work riveted , demolishing , brick work with common fly ash bricks , half brick masonry with non modular fly ash , providing and fixing white vitreous china pedestal type water closet , providing and fixing wash basin , providing and fixing brass bib cock , providing and fixing water closet squatting pan , providing and laying ceramic glazed floor tiles , providing and fixing on wall face un plasticised rigid pvc swr pipes , providing and placing on terrace polyethylene water storage tank , providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers , providing and fixing pvc door frame , 30 mm thick factory made polyvinyl chloride door shutter , providing and fixing isi marked flush door shutters , neat cement punning , providing and fixing gi pipes , 40 mm dia nominal bore , clearing grass and removal of the rubbish , excavating , supplying and filling of local earth , dismantling colour coated roofing sheet , providing and fixing precoated galvanised iron profile sheets