Latest earthing terminal Tenders | Government earthing terminal Tenders

CTN :45738480

21 Jul, 2026 23.32 Lacs

Khurda - Odisha

Tender For supply of 9u rack , 2kva ups with rack and 06 nos 18 ah battery with each set 30 min backup , 2 port io box , earthing terminal box with accessories , chemical type earthing rod with accessories , earthing pit installation job , 12 core ofc cable , lying fibre cable , 25 mm pvc casing caping , 50 mm casing caping , earthing cable 1c 4sqmm , joint closure , fibre splicing per fibre , 3 or 4 pvc pipe , flexible conduit , gi pipe 50mm , duct 40mm , danger tape , route marker , cat 6 cable , jack panel 24 port , switch socket power supply board , power cable 3 core 2.5 sqmm , power cable 3 core 4 sqmm , cat 6 cable 1 mtr , lc e2k ofc patch cable 5 mtr , lc e2k ofc patch cable 10 mtr , otb box with e2k 12 port connector , lugs ring type , 40 mm coupler , charges of i c of supplied equipment , material transportation

corporations/Associations/Others

CTN :45706192

09 Jul, 2026 NA

Bangalore - Karnataka

Tender For auction sale of scrap tyres with diff sizes.,empty wooden reels in deteriorated condition,scrap empty steel cable drums 11kv,pothead end termination of 11 kv class,scrap breakers, link box & switchgear etc.,scrap t&p materials,scrap plastic cans & telephone

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

Central Government / Public Sector

CTN :45591757

29 Jun, 2026 NA

Multi City - Telangana

Tender For auction sale of depot ferrous scrap - 12232ms26c,98050175, quantity- 60.085 mts. scrap condemned unserviceable ms-gi-ci rusted,corroded,dusted mixed scrap of c and w,loco,p. way,signal interlocking material consisting of all type of sheets,boxes,ms high gauge,pipes,footsteps,rings,strips,filters,trusses,patch cut parts,gutters,drum clocks,distribution boards,u rack,boring rod,ms panel body,ms battery charger covers,hand cuffs,driver seat,hand cart,push trolley,packing strips,ms body of block instrument,ms boiler coil cut pieces,42 u rack ms body,ms collapsible gate,ms termination box,ms bathroom ventilator,ms body of data logger,ms heater coil,screen guard,nuts,bolts,lavatory doors,ms carriage doors,pins,rivets,links,rods,angle cut pieces,structural frames,brackets,drums,cocks,basins,wire meshes,wire ropes,water tank cut up parts,casings,corrugated sheets,filter top and bottom caps,clamps,washer plates,stands,frames,sheet cuts,plate cuts,joists,channels,bases,plates,flats cut pieces,vestibule frames,window,door,shutters,head stocks cut up parts,broken t and p items,racks,compensating rings,bindings,washers,dust bins,chains,berth strips,gate frames,iron furniture,motor bodies,screw rods,levers,flats,rod cut pieces,trolley wheels,gi ducts,glow sign boards,ms electrical scrap,building rods,packing strips,ms body of rru,air cooler empty bodies,cbf filter,corrugated sheets,drums,blower motor frames,ucb packing frames,under frame cut up parts,berth frames,supports,cylinder blower covers,valves,end shield covers,traction motor yokes,shafts,piston rings,gears,brake shoe heads,brake gear items,straps,cotters,springs,equalizing stays,fan hub,end shield,pinions,ms covers,signal arms,lc gate pipes,ladders,angles,signal booms,rounds,signal buckets,pulleys,fabricated posts,signal lamp structures,liners,screws,spikes,air brake cylinders,brake hangers,bss hangers,battery boxes,battery containers,junction and location boxes,sleepers cut pieces,axle counter empty box,dc-dp ips empty rack ,sge block instrument empty box ,reset counter box,gps clock ,42 v rack,transformer bay,ms chain pulley blocks,beam scale parts,idly cooker with steam generator body,wheel barrow,fry pan single burner,ms floor stand,ms sliders,ms body wet grinder,fry pan,jara,ms ips rack rifle safety chain,ms air pump,foot spray,antenna,spiral binding machine,ms man drill,trbc covers,hand cart push trolley,expresser fan guard,ms first aid box,hacksaw frame,tool box,tie bars,ci brake blocks,composite brake blocks,ci pulleys,buckets,ms gear wheels,gym equipment,roti maker,bicycle parts,axle box,bfr cut up parts,grills,mesh,gate wheels,girders cut pieces,collars,trolleys,foot plates,signal point rods and any other ms-gi-ci material present in the lot with or without attachments of nf,ss,rubber,nylon and plastic. ms pan mortars,wire claws,wire baskets,crow bars,jim crow,dip lorry,weld filling body,sleeper hooks,rail dollies,rail cutting frames,augers,pick axe,tongue for rails,spades,beaters,ballast rake,powrahs,rail cum road mono trolley,case tin,h.s.lamps,rail dolly clips,shovels,trolley wheels and similar gang man items of sorts and sizes,with or without attachments.fiber,glass,windows,frp glass windows,window frames of sorts and sizes,broken or unbroken,with or without attachments of nf window shutters. [aluminium - 2 percent] note- 1. nf material,axles,wheel discs,and rails or material not mentioned in the description,if found during the delivery are to be returned to railways. 2. track and track fittings running through this area are excluded. 3. nf and stainless-steel attachments are approximately 0.1 percent of the lot quantity. 4. gas cutting permitted to facilitate loading. location- bin no- 232, right side of road no- 2. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery, as per motor vehicle act 1988.

CTN :45540616

29 Jun, 2026 5.18 Lacs

Ujjain - Madhya Pradesh

Tender For providing and fixing of cable and other electric parts at various pump house. - supply of xlpe insulated power cable (conformingis-7098) 1100 volt grade/heavy duty power cable conforming to is1554-1100 volts grade, 2core/3 core/4 core isi marked with alu. stranded /solid conductor armoured 4 core uadd sor no. 14.1.8/p-79, 50 sq.mm(xlpe), 70 sq.mm(xlpe), supplying of isi marked change over switches in sheet encloser confirming to is:4064/ is:13947 (part i & iii) with side handle operated 4 pole with two earthing terminals 7.3/p-36, 100 amps. 415/500 volts.(on load ), 200 amps. 415/500 volts.( off load ), supplying of isi marked and approvedmake of moulded case circuit breaker (mccb) suitable for 3 phase, 3 pole, 50hz, 415 volts, ac supply with respective interrupting capacity (ka) at 415 volts cited against their range standard conforming to is - 88288/p-40, mccb with breaking capacity 35 ka at 415 v current rating 160 amps & adjustable : 70% - 100% thermal & 5-10 times magnetic setting 8.2.1, mccb with breaking capacity 50 ka at 415 v current rating - 400 amps & adjustable : 70% - 100% thermal & 4-10 times magnetic setting, supplying and laying of submersible flat cable isi marked 3 core copper wire of suitable size with proper clamping of approved make.10.0 sq.mm multi strand 11.5/p-165mpphed sor 1st sep. 2023

State Government

CTN :45502053

16 Jun, 2026 NA

Jalgaon - Maharashtra

Tender For supply, erection, testing, and commissioning of electrical equipment and fire extinguishers for the kurha pdn scheme.-oil conservator with filling hole with cap and plain oil level gauge. silica gel dehydrating breather charged with silica gel. ,,oil drain valve. ,oil filter valve. ,lifting eyes/hooks. ,two earthing terminals ,diagram and rating plate. ,air vent ,explosion vent. ,100 mm dia thermometer with thermometer pocket. ,four bi directional plain roller. bucholtz relay. , resistance temp. detector. ,marshalling box. , automatic voltage regulator (avr), 16)

corporations/Associations/Others

CTN :45480068

22 Jun, 2026 NA

Bangalore - Karnataka

Tender For auction sale of scrap tyres with diff sizes.,empty wooden reels in deteriorated condition,scrap empty steel cable drums 11kv,pothead end termination of 11 kv class,scrap breakers, link box & switchgear etc.,scrap t&p materials,scrap plastic cans & telephone

Central Government/Public Sector

CTN :45431598

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s signaling items i.e. complete signal units, electronic lifting barrier, signaling pole latice with ci attached, cable termination rack, location box full &half, armed wire, sliding boom complete, operating panel, padestal, ristrictor wearing plate, gi boom for elb, nbt block instrument, point machine chasis with accesaries with minor nf attached, lock lever, stop disc for lb, winch m/c, ground connection, rail attached ms board, ms board with angle, ms rusted bars, rods, fire bucket, electric lifting barrier and other signaling items with minor nf attached, c&w items i.e. various types and sizes broken springs, inner springs, released bogie beams offsized outer springs, broken cbc body, striker casting wear plate, man hole cover, pull rod, push rods, plates, knucle pin, brake beams, cp top, knuckle, draft gear box, adeptor, push rod,yoke, yoke pin, knucle pin, safety bracket, brake shoe, pin, nut bolts, top side liners, stricker, primary verticlal damper, yaw damper, vertical shock absorber, vertical sec damper, lateral damper, axel end cover, centric disc, fastners, fire extingyishers offsize & type, beater, pick axe, shovel heat, mechanical jack, hydraulic jack, pad lock, hammer, gi wire, basket, tin case, offsize rack ballast, bucket gi, pan iron, ohe items i.e. offsize and type insulators, ohe high mast cut pieces and other ohe items, ms bond patti, blow lamp, structural clamp, isolator assembly, various boards, retro reflactive number plates, junction box, small chain, anti climbing device, hot rolled steel flat, fuse switch assly, padestal, cantilever assly, da-2, caution board, guy rod with mast & guy attached bolt items of electric and power department i.e. pawrah, el box, switches, etc items of works department i.e. ms angle, plates, ms patra, ms i sections, gi gater, parline, tmt bars, gate post, gate flap and other ms items with some rail pieces attached, items of tele department i.e. cgdb pole, ms boxes, items of p way department i.e. rail dolly, push trolly, hand cart, gi case, broken tiebars, ms engineering boards, rail cum road trolly, ms clamp for joggle fishplate, rail tongue, rusted st slipper, all types of lc boards, ms pipe, ms fishplate, hs lamp, rail toung, whistel thunder, hand operated cutting m/c, hydraulic jack, office clock, dubber for gate lamp, gi bend, broken bdds rsp tool kit, broken bomb blank vehicle search mirror, lock pad, skv welding set, ms sheets, chequered plate, cc cribs, bathing appartus oxygen cylinder , axle box housing, frame of battery etc., above items may have some ss items (the above items may be with minor nf attached or may not be) (the above items may have rusty and dusty or may not be) ( cuting allow for easy loading before delivery) mode of delivery- by weight location ¿ b/h godown 5 & 6

CTN :44721174

06 Jun, 2026 12.61 Lacs

Kamrup - Assam

Tender For bid to ras supply of high mast light and misc items d d - providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires , providing and fixing of 10 meters high mast lighting tower for large area with 12 led flood light luminaires , led bulb 9w , copper chemical earthing with complete wire and materials , rubber adhesive providing and fixing of 16 meters high mast lighting tower for large area with 08 led flood light luminaires,octagonal pole construction with metal protection treatment of fabricated mast section, hot dip galvanised as per is:4759 latest, octagonal pole sheet thickness 3 mm, material of octagonal pole high tensile steel, 01 nos of longitudinal welds, type of welding is submerged arc welding process, internal distance between parallel faces at the base of pole 175, 01 no of section,internal distance between parallel faces at the top of pole 70, grades of high tensile steel ish430la as per is:5986 (grade 355), cross section of octagonal pole (no of sides) octagonal, with no door opening, width of base plate 300 mm, number of nuts for each pole 1, foundation bolt type j type en 8 grade, bolts and nuts are conforming to specication as per is:1363 - grade a, base plate material mild steel fe 410 conforming to is : 2062, necessary accessories on each pole foundation bolts,nuts, washers, instruction manuals, bolt size m24x750, thickness of base plate 16 mm, number of washer per bolt for each pole 2, number of bolts for each pole 4, foundation bolts and nuts and octagonal pole shall be galvanized as per is:4759 (latest), length of base plate 300 mm, earthing terminals on the base of the pole, for lightning and electrical protection, regional wind withstand capacity which the pole structure support is suitable to withstand (in m/s) 47, the designed life of the pole shall be 25 years, terminal box ) /bid number : gem/2026/b/7398300 * /dated: 01-04-2026 & & / bid document 1 / 15

CTN :45418039

03 Jul, 2026 11.81 Lacs

Gwalior - Madhya Pradesh

Tender For providing, supplying of repairing material.file.58/26x6/4. - supplying and fixing asper specification bakelite holder/angle holder ofapproved make with necessary materials complete, 6 amp 250 volt 3 pin, 16 amp 250 volt pin, supplying and fixing of approved make modular type pvc box minimum depth 40mm and minimum thickness 2mm withmodular base and cover plate including fixing on surface etc. as required for:- 3 module pvc box, supplying and fixing of approved make modular type pvc box minimum depth 40mm and minimum thickness 2mm withmodular base and cover plate including fixing on surface etc. as required for:- 6 module pvc box, supply and fixing as per specification switch of approved make isi marked with necessary material complete. 6/10amp sp 250 volt modular switch, supply and fixing as per specification switch of approved make isi marked with necessary material complete.16/20amp sp 250 volt modular switch, supply and fixing as per specification socket outlet of approved make & isi marked with necessary material complete 6/10/16/20amp 250 volt 3 pin modular type (250 -6 amp, 250-16 amp), 7.1suppyling of isi marked switch fuseunit (rewirabletype) triplepole with neutral link ,415 volt having conduit/cable glandentry with two earthing terminals confirming to is:13947(parti& iii) .200 amp., supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- single pole (sp) 6 amp to 32 amp rating, supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- double pole (dp) 6 amp to 32 amp rating, supplying of isi marked and accepted standard of miniature circuit breaker (mcb) ofcseries suitable for 240/415 volts, 50 cycle,10 ka valueac supply confirming tois:8828:1996,iec:60898:2002 but without enclosures :- for triple pole & neutral(tpn) 50 amp to 63 amp rating, supplying of approved make,powder coated vertical tpn mcb db metal double door with mccb 100atp10ka as incomer and space for sp/tp mcbs as outgoing (withoutmcbs)inclusive ofbusbar &connections etc without mcb: 4 way with mccb, supplying,fixing and testing of mpp condensor of approved make asrequired as per specification2.5 mfd., supplying,fixing and testing of mpp condensor of approved make asrequired as per specification3.15 mfd., supplying fixing and testing of approved and suitable make led driver for an existing led luminary panel. led luminiare 1x1, 24w panel driver, supplying fixing and testing of approved and suitable make led driver for an existing led luminary panel. led luminiare 2x2, 36w panel driver, supplying,fixing and testing of flourescent tuberod isi marked of approved make as required as per specification 4 x 36 watt, supplying of isi marked change over switches in sheet enclosureconfirming to is : 4064 / is : 13947 (part i & iii ) with side handle operated 4 pole with two earthing terminals 300 amps. 415/500 volts. (off load ), supply and fixing of approved make step type modular electronic fan regulator including connection etc. as requiredon existing board 100 watt (1 module), supply and fixing of approved make step type modular electronic fan regulator including connection etc. as requiredon existing board 100 watt (2 module), alluminium wire 2.5mm isi marked roll of standard length (1 coil=90 m) rate- 400, pidlite steelgrip 1.80 cm x6.5 mx.125 mm pvc electrical insulation tape make steelgrip, supply of extension box with one 5amp. pin and one 16 amp socket with 2 switches

Earthing Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector