Latest earthmoving machinery hiring Tenders | Government earthmoving machinery hiring Tenders

Central Government/Public Sector

CTN :40754113

02 Jul, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possib

CTN :40886761

19 Jul, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of fitness equipment for station gym - running machine , ground pulley , jogging machine , ski machine , iso lateral decline press , incline press , back down , back row , vertical bar , overhead press , straight armdown machine , dent mentum machine , hamstring machine , savage machine , force down machine , overhead crane , stomach machine , neoprene weight 2500 gms , neoprene weight 5000 gms , neoprene weight 7500 gms , neoprene weight 10000 gms , neoprene weight 12500 gms , neoprene weight 15000 gms , neoprene weight 17500 gms , neoprene plate 2500 gms , neoprene plate 5000 gms , neoprene plate 7500 gms , neoprene plate 10000 gms , neoprene plate 15000 gms , competition colored weight 5 kg , competition colored weight 10 kg , competition colored weight 15 kg , parallel bar 89 inch , parallel bar 60 inch , parallel bar 48 inch , parallel ez bar 47 inch , lifting rack , stable bench , foot board bench , utility bench , work bench , scott bench , holdout bench , cage rack , vertical rack , attachment bar 20 inch , attachment bar 48 inch , mag handle set , v handle , d handle , push down rope , power sled , machine fly , gym goer , heavy rope , intestinal bench , cannon ball 8 kg , cannon ball 12 kg , slam ball 3 kg , slam ball 6 kg , power bag 15 kg , power bag 20 kg

CTN :40903650

11 Jul, 2025 NA

Navsari - Gujarat

Tender For supply of multi station gym (v3) (q2) , table tennis - table (q3) , weight lifting set (v2) (q4) , selectorized bicep curl machine (q3) , flat gym bench (v2) (q4) , multi adjustable bench (v2) (q3) , elliptical cross trainer (q3) , olympic weight tree (version 2) (q3) , swiss gym ball (q4) , exercise band (theraband) (q4) , badminton court mat (q3) , flooring for gym (q4)

State Government

CTN :40848464

01 Jul, 2025 NA

Trimbak - Maharashtra

Tender For providing various types of material for various work in fin year 2025-26 - material, , , , , , mm, mm, mm, mm, , paver block 60 mm, paver block 80 mm, production well excavation service soft material, production well excavation service hard material, production well softand hard material lifting, computer, printer, , , , , , garden bench, , , , , , mm, mm, mm, mm, square bar 8,10,12,16 mm, , , fly ash , , , , , , x , x , x , x , gi pipe 2 x 2, gi pipe x , gi pipe 1 x 1, gi pipe 1.5 x 1.5 inch, gi pipe 3 x 1.5 inch, gi pipe 3 x3, gi pipe 1 x 3, gi pipe 1 x 2, gi pipe 2 x 4, c angle 25 x 3, c angle 50 x 5, c angle 40 x 5, c angle 65 x 5, f 18 x 4, f 30 x 5, f 20 x 3, gi seet coating, chainlin fencing, 100 x 50, c 75 x 40, ms , 6 mm ms bar, pipe ms 2, pipe ms 1, pipe ms 0.5, , , . , . , , , 63 mm pvc pipe, 63 mm l bo, 63 mm t, 63 mm reducer, 63 mm , 63 mm fta, 63 mm mta, 63 mm hdpe pipe, 75 mm pvc pipe, 75 mm l bo, 75 mm t, 75 mm reducer, 75 mm , 75 mm fta, 75 mm mta, 75 mm h.d.p.e pipe, 90 mm pvc pipe, 90 mm l bo, 90 mm t, 90 mm , 90 mm reducer, 90 mm fta, 90 mm mta, 90 mm hdpe pipe, 4 pvc pipe, 4 l bo, 4 t, 4 , , fta, mta, hdpe , 1 hp starter, 3 hp starter, 7.5 hp starter, 12.5 hp starter, 1.25 hdpe, pvc pipe, l , t, , , fta, mta, hdpe , / upvc , / l upvc, / t upvc, / upvc, / upvc, / upvc, / upvc, pvc, pvc, non return volve, air wal, switch wal, mm, , . , , , , , 1.5 hp , kg, kg, kg, , , , , , acrolic colour, , apex color, dam , , , , apex royal color, asian paints ace, asian paints star, , , , , , , , x , x , x , x , , , , , , . , / x , , , , . . , , , , \, , tricycle, dustbeen big, plastic waste storage shed, tcl 25 kg, mediclor 100 ml, fall selling, foging machine, alam ( )

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

CTN :40878622

11 Jul, 2025 9.38 Lacs

Dharwad - Karnataka

Tender For procurement of various materials for cuntsruction of kicthen hall in nigadi - gpn-sharpening charges, gpn-mason class i (with tools), gpn-mason class ii (with tools), gpn-painter class i, gpn-unit cost as per the specification, gpn-mixer (concrete) - 1 cum capacity, gpn-mixer (concrete small used in culvert), gpn-hom of welding and grinding machine, gpn-hom of vibrator 0.71 days, gpn-hom of cutting and grinding machine, gpn-welder grade i, gpn-mechanic class ii/mechanic hmp grade i/eme grade, gpn-fitter class i, gpn-worksite facilities/creche/drinking water/first aid, gpn-conveyance, gpn-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, gpn-tmt bars fe 500, gpn-vitrified tiles 600x600 mm, gpn-whitening, gpn-ready mix primer paint (ready mix red lead paint), gpn-enamel metal paint, gpn-glazed tiles 300x450, gpn-m.s rods, gpn-border tiles 30 x 10 cms, gpn-plastic emulsion paint, gpn-dry distemper, gpn-portland cement, gpn-binding wire, gpn-silver oak or equivalent planks 38 mm thick, gpn-corbon electrodes, gpn-casurina poles 100 - 150 mm, gpn-rms gusset plate, gpn-ms pipes of 80 mm to 100 mm dia, gpn-super plasticizer admixture is marked as per 9-103-1999, gpn-ms flat, gpn-stone chistler class ii, gpn-the cost of all materials, centering, transportation, fixing, wastage and other extra charges etc, excluding the cost of unskilled labour, gpn-transportation/loading and unloading of material/lifting of material/centering charges wherever necessary /over head/wastage/unforeseen charges/miscellaneous which are necessary during execution, gpn-electrification, gpn-size stone 20 x 20 x 25 cms, gpn-broken stone aggregate 40 mm size, gpn-broken stone aggregate 20 mm size, gpn-broken stone aggregate 12 mm to 10 mm size, gpn-boulders, gpn-bond stone 20 x 20 x 45 cm, gpn-coarse sand (zone iii)

CTN :40856488

18 Jul, 2025 NA

Ambala - Haryana

Tender For supply of wrist curl machine (q4) , 45 degree leg press or hack squat machine (q3) , flat gym bench (v2) (q4) , rubberized weight dumbbells (q3) , yoga mats (q3) , multi adjustable bench (v2) (q3) , shoulders press machine (q4) , lat pull down (version 2) (q3) , rubberized weight plates (q3) , competition kettle bells (q3) , dumbbells rack (version 2) (q3) , cable cross over (version 2) (q3) , flooring for gym (q4) , elliptical cross trainer (q3) , weight lifting set (v2) (q4)

Corporations And Associations And Others

CTN :40865599

03 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For hiring of back hoe and loader machine for day to day maintenance works and lifting of unclaimed malba in ward no. 121 dwarka-a / ngz.

Corporations And Associations And Others

CTN :40865602

03 Jul, 2025 NA

Kargil - Jammu And Kashmir

Tender For hiring of back hoe and loader machine for day to day maintenance works and lifting of unclaimed malba in ward no. 133 mahipalpur / ngz.

Central Government / Public Sector

CTN :40685457

03 Jul, 2025 24.49 Lacs

Panipat - Haryana

Tender For corrigendum : custom bid for services - rpnc252027 support service for swing extruder vfd installation-shifting, foundation and installation of power transformer- 1. the power transformer is to be installed by construction of new transformer foundation, dismantling/modification of surface, providing chain link fencing on all other 4 sides, cleaning and refurbishment of bay area is in the scope of contractor only. all necessary manpower, tools & tackles, shifting machinery like hydra/crane etc shall be in the scope of contractor only. 2. shifting of power transformer of 7.2 mva onan from store to site, loading-unloading, erection, site storage are in scope of contractor. 3. the basic data sheet and ga drawing of the proposed transformer is attached in scope only. 4. the bidder if required must construct bay width, height and fire walls as per relevant is/iec/oisd standards and site conditions such that adequate clearances for maintenance shall be maintained. bidder to submit the plot plan of equipment layout of transformer layout along with the bid. the bidder shall carryout the site visit for assessment of the available installation space. the total length of the transformer bay should be such that the radiator can be accommodated on either side of transformer tank in the specified bay width. 5. all necessary earth pit provisions, & fire barriers/wall modifications, provision of new hvws water sprinklerbased firefighting system having suitable capacity for protection against the fire & explosion as per the design of supplied transformer and applicable standards & direction of eic. provision of all necessary fire protection system for transformers shall be in the scope of lstk contractor. 6. construction of oil drain facility of transformer as per is standard and hookup with existing burn oil pit. 7. the erection to be certified by contractor as per its recommended procedures which is to be submitted prior to erection. qap for erection and site commissioning shall also to be endorsed by contractor. 8. all kind of lifting, rigging work for loading-unloading, erection work including supply of hydra/ cranes, lifting rigging materials, manpower, tools and tackles as required are in scope of contractor. 9. all kind of skilled, semi-skilled, unskilled manpower as per itc of transformer requirement will be in the scope of contractor. 10. erection includes entire vacuum by proper capacity of vacuum pump, for not less than 48 hours, or more if required as per the instruction of engineer in charge. 11. first filling up of the transformer oil at site, its filtration, site testing oil sample, any refiltration required during final commissioning shall be in the scope of contractor including all tools, tackles and including oil filtration machines. oil may be supplied in drums, which should be properly sealed during transportation and storage. seal shall be verified and opened in front of iocl representative before filling in transformer. contractor should have enough storage capacity for handling oil. filling the oil from drums to the transformer through suitable capacity of high-quality filter machine and filtration of the same to get desired bdv &ppm as specified by engineer in charge and transformer manual. 12. contractor must replace all the gaskets by new ones if required by engineer in charge. 13. the contractor shall arrange nitrogen cylinder required at site for above work. 14. contractor must repaint the transformer tank with two coats of anti-rusting good finish ltbs grey shade 631 of is:5 by spray painting if required and as per the direction of engineer in charge..

Earthmoving Machinery Hiring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Corporations And Associations And Others

Corporations And Associations And Others

Central Government / Public Sector