Latest economizer scrap Tenders | Government economizer scrap Tenders

Central Government And Public Sector

CTN :40873575

15 Jul, 2025 NA

Bangalore - Karnataka

Tender For bush holder (dia 33) for hammer tool of lfm as per rwf drg no. 704300110360. note: 1. wa rranty of 12 months from the date of supply or 06 months from the date of fitment whichever is earlier has to be provided against quality manufacturing defects and workmanship for the item supplied. 2. material co mpostion certificate, heat treatment process and mechanical properties certificate shall be produced from nabl accredited laboratories. [ warranty period: 12 months after the date of delivery ]

Central Government And Public Sector

CTN :40837047

07 Jul, 2025 NA

Tinsukia - Assam

Tender For supply of item description:- electronic toe load measuring device as per rdso specification no tm/sm/etlmd/218(fourth revision - 2022 or latest date effect from 01.06.2022). technical data: 1. cap acity of load cell -: 2000k.g, 2. type of load cell -: stainless steel, 3. accuracy -: + 20k.g, 4. operating vol tage -: 5.5v to 5.65v, 5. resolution -: 1.0k.g, 6. display -: 16-character alpha numeric lcd display, 7. sensit ivity -: fast return to zero, 8. calibration -: micro controller based auto calibration. introduction: - electro nic toe load measuring device is an efficient tool in the hands of permanent way engineers to determine t he actual toe load of any elastic rail clip. this unit gives direct reading of the toe load in terms of kilogram s on its alphanumeric lcd display. the whole unit is safe to handle, compact, rugged, and its light weight i s an additional advantage over its mechanical counterpart. the device is provided with a spring loaded ga p sensing device which automatically freezes the required peak value of the toe. a set of link hanger, bala ncing legs, and thrust bearing & tongs is provided for pulling the clip in a uniform and balanced manner. only 4-5 minutes time is required for installation of device on track, measurement of reading and removal o f device from the line. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40809880

22 Jul, 2025 NA

Prayagraj - Uttar Pradesh

Tender For supply of complete set of tong and steel link (item no. 1(a), 1(b) & 2 as per attached drawing ) with b olts & nuts, for toe load measuring device (mechanical), as per rdso spec. no. tm/sm/14 rev. 01 of 2005, third revision 2022 and drawing no. tm/9528/1 & tm/9528/2 attached. [ warranty period: 30 months aft er the date of delivery ]

Central Government And Public Sector

CTN :40810004

07 Jul, 2025 NA

Bengaluru - Karnataka

Tender For supply of water soluble polymer quench oil ilo quench 700 aqua of castrol make or equivalent shall have following properties. i) typical characteristics of product. a) density at 15 deg c : 1032 to 1040 kg/m3. b)ph distilled water (15%) to be 9.0 to 9.7. c ) reffractive index to be 1.36 to 1.42. d) appearance to be viscous cloudy, e) color to be clear yellow. ii) typical operating conditions: 1) concentration in dm water of tds below 100 ppm & chlorides below 40 ppm to be 10% 2) bath tem perature : 25 to 55 deg c. special conditions: i) the supplier should give certificate to the effect that t he product offered is ilo 700 aqua of castrol make or equivalent. the refractive index after mixing sh all not vary more than 2% on environmental issues. ii) five axles shall be quenched in dm water with 10% of polymer oil for 30 minutes duration at a bath temperature below 55 deg.c. the mechanical pro perties at mid radius of axle length should meet the requirements specified at clause 7.2,7.4 of irs r4 3/1992 specification and micro structure should reveal fine pearlite structure. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

Central Government/Public Sector

CTN :40794438

04 Jul, 2025 NA

Sundergarh - Odisha

Tender For supply of item 10 60210009010805 mechanical seal f/pump mm: kpd 200/46 , item 20 60210009014158 mechanical seal f/pump mm: cphm-125/40 , item 30 60210009010516 mechanical seal, pos: 230, dwn: pd/r144639

Central Government And Public Sector

CTN :40211295

28 Jun, 2025 NA

Chittorgarh - Rajasthan

Tender For corrigendum : tender for supply of / 9 9 % % anti corrosion or erosion putty - supply of high build anticorrosive immersion grade epoxy putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of primer for item no 1 high build anticorrosive immersion grade epoxy coating- putty make- itw devcon - belzona - henkle - stanvac chemical india ltd as per detail technical specification enclosed , supply of high performance brushable ceramic metal surface putty-coating make- itw devcon - belzona - henkle - stanvac chemical india ltd to protect metal from erosion- pitting- cavitation as per detail technical specification enclosed , supply of wear resistant ceramic- metal rebuild putty of make- itw devcon - belzona - henkle - stanvac chemical india ltd for repair wear parts- pitting as per detail technical specification enclosed , application of item no. 1 item no. 2 item no. 3and item no. 4 on pump column pipes surfaces- equipments including cleaning the surface of all dirt , dust , rust and other foreign matter by mechanical cleaning and grit blasting as per detail procedure enclosed

Central Government/Public Sector

CTN :40760561

27 Jun, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of mechanical type wheel distance measuring gauge model wg-1 (v) (measuring range: 1590 mm to 1610mm) with all metal construction fitted with vernier scale and measures precisely the wheel dist ance of rolling stock wheel sets with 0.1 mm resolution. supplied in light weight, nicely finished wooden st oring & transportation box with carrying handle with working manual. technical specification: accuracy: - 0.1 mm. least count: 0.1 mm. range: 10 mm. measuring tips must be spring loaded: made of carbide. tub ing wall thickness: 1.5 mm. construction: all metal construction. leveling: spirit level provided with visibl e in 3 dimensions. storage:wooden box. make: paragon instruments & engg.(pie) or jyoti or equvlent. item should be supplied with calibration certificate issued by government approved lab. [ warranty period: 3 0 months after the date of delivery ]

Central Government / Public Sector

CTN :40739812

01 Jul, 2025 NA

Mathura - Uttar Pradesh

Tender For providing of custom bid for services - 9050c25b36 - contract for servicing & calibration of dynamic balancing machine h-30bl at mechanical workshop of mathura refinery line item 10 - charges for servicing & calibration,custom bid for services - 9050c25b36 - contract for servicing & calibration of dynamic balancing machine h-30bl at mechanical workshop of mathura refinery line item 20 - to and fro travel charges per visit

State Government

CTN :40698942

20 Jun, 2025 NA

Ganjam - Odisha

Tender For supply of cath lab. items - diagnostic wire (both hydrophobic & hydrophilic) , ptca guide wire (both hydrophobic and hydrophilic) , cook coils for coil embolisation , cook sheath , cover stent , cutting balloon , device loader(cook device cable) , device loader(cook device) , diagnostic catheter , drug eluting balloon , drug eluting stents everolimus / sirolimus , drug eluting stents zoterolimus , femoral sheath , high pressure line of rt 150 injector , icd-single chamber / dual chamber , introducer needle , p.p. i. cable , pacemaker dddr mri compatible us fda / ce approved , pacemaker vvir mri compatible us fda / ce approved , pci guiding catheter , ptca balloon semi-compliant , ptca balloon non-compliant , pulse generators , radial sheath , radial puncture jelco needle and stainless steel needle , rota atherectomy wires-floppy, standared, extra support , rota link plus burr , rota wire extra floppy , rota wire floppy , survival kit/ inflation device , swan ganz catheter , three way connector , mechanical thrombectomy device , thrombo suction catheter , sulfurhexafloride kit for contrast echo , gadolinium for cardiac mri , bioresorbable vascular scaffold , high pressure inflation device 55atm , perfusion ptca balloon , nc cto balloon 0.85mm (usfda approved) , cto balloon 1.00 mm (usfda approved) , guide extension catheter (usfd approved) , exchange wire-hydrophilic and hydrophobic , doc guide wire extension , snare/ baskets cathters , y connector kit , temporary pacemaker lead (st. jude/medtronic , pig tail catheter , pmo line 2 meter length (top) with 3 way stopcock , pressure transducer kit-single ddt (disposable) , manifold (2 folds) , radiation protection gloves , radiation protection shields radschields/ radpads , coronary intravascular lithotripsy (ivl) 80/120 pulses (proprietary , oct catheter compatible with st.jude medical-oct imaging , oct ffr wire compatible with st. jude medical- oct imaging (proprietary item) , ivus catheter compatible with volcano eagle eye platinum ivus (phillips) (proprietary item) , diamond back orbital atherectomy device with console (proprietary item) , excimer laser catheter with console , mechanical thrombectomy device , asd device, sheath with loader kits , vsd device, sheath with loader kits , pda device, sheath with loader kits , iabp catheter compatible with cs 300 and cs100 , act kit compatible with abbott sonoclot , microcatheter , leadless pacemaker

Central Government And Public Sector

CTN :40684712

03 Jul, 2025 NA

Kudankulam - Tamil Nadu

Tender For process pumps spares - impeller casing as per technical specification item no.1 , impeller as per technical specification item no.2 , impeller nut as per technical specification item no.3 , impeller nut gasket as per technical specification item no.4 , sleeve gasket as per technical specification item no.5 , casing gasket as per technical specification item no.6 , internal mechanical seal with gland plate as per technical specification item no.7 , oil seal far end as per technical specification item no.8 , o-ring far end as per technical specification item no.9 , oil level indicator as per technical specification item no.10 , o-ring drive end as per technical specification item no.11 , oil seal drive end as per technical specification item no.12 , shaft as per technical specification item no.13 , bearing cover drive end as per technical specification item no.14 , intermediate support and bearing housing as per technical specification item no.15 , bearing cover far end as per technical specification item no.16 , shaft sleeve as per technical specification item no.17 , back plate as per technical specification item no.18 , impeller casing as per technical specification item no.19 , impeller as per technical specification item no.20 , impeller nut as per technical specification item no.21 , impeller nut gasket as per technical specification item no.22 , sleeve gasket as per technical specification item no.23 , casing gasket as per technical specification item no.24 , internal mechanical seal with gland plate as per technical specification item no.25 , oil seal far end as per technical specification item no.26 , o-ring far end as per technical specification item no.27 , oil level indicator as per technical specification item no.28 , o-ring drive end as per technical specification item no.29 , oil seal drive end as per technical specification item no.30 , shaft as per technical specification item no.31 , bearing cover drive end as per technical specification item no.32 , intermediate support and bearing housing as per technical specification item no.33 , bearing cover far end as per technical specification item no.34 , shaft sleeve as per technical specification item no.35 , back plate as per technical specification item no.36 , impeller casing as per technical specification item no.37 , impeller as per technical specification item no.38 , impeller nut as per technical specification item no.39 , impeller nut gasket as per technical specification item no.40 , sleeve gasket as per technical specification item no.41 , casing gasket as per technical specification item no.42 , internal mechanical seal with gland plate as per technical specification item no.43 , oil seal far end as per technical specification item no.44 , o-ring far end as per technical specification item no.45 , oil level indicator as per technical specification item no.46 , o-ring drive end as per technical specification item no.47 , oil seal drive end as per technical specification item no.48 , shaft as per technical specification item no.49 , bearing cover drive end as per technical specification item no.50 , intermediate support and bearing housing as per technical specification item no.51 , bearing cover far end as per technical specification item no.52 , shaft sleeve as per technical specification item no.53 , back plate as per technical specification item no.54 , impeller casing as per technical specification item no.55 , impeller as per technical specification item no.56 , impeller nut as per technical specification item no.57 , impeller nut gasket as per technical specification item no.58 , sleeve gasket as per technical specification item no.59 , casing gasket as per technical specification item no.60 , internal mechanical seal with gland plate as per technical specification item no.61 , oil seal far end as per technical specification item no.62 , o-ring far end as per technical specification item no.63 , oil level indicator as per technical specification item

Economizer Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors