Get complete information related to latest Edge Light Fitting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Edge Light Fitting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Edge Light Fitting Tenders.
Tender For repairs maintenance of electrical and mechanical equipments high mast light search lights and other miscellaneous items at cad pulgaon - disconnecting and taking down existing unserviceable street lights/flood lights any type/watts from pole/wall and dismantling the lightfittings. repairing/replacing unserviceable parts re-fixing the same on pole/wall after testing and removal of carbon from line jumpers/tightening of jumper/alignment of fitting defective street light/security light/flood lights fitting/led light from electric pole complete all as directed by eic. note: spare parts and accessories such as led driver, and connected items etc will be measured and paid separately under respective item as supply only and fixing is deemed to be included in this item., supply only led street light driver for 45 watts led street light as per make given all as specified and directed by eic., supply only led street light driver for 60 watts led street light/ flood light type as per make given all as specified and directed by eic., supply only led street light driver for 100 watts led street light/ flood light type as per make given all as specified and directed by eic., supply and fix in repair led streetlight of 45 watt comprises of pressure die cast aluminium housing & having system efficiency>123 lumens/watt i.e 5570 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k,pf>0.9,driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account. 3.the complete fitting along with led module, driver, surge protection device and all associated accessories shall be covered under 05 (five) years comprehensive warranty by the contractor from the date of invoice.make : philips/ wipro/crompton, supply and fix in repair led streetlight of 60 watt comprises of pressure die cast aluminium housing & having system efficiency>110 lumens/watt i.e 6670 lumens,all leds should be highpower leds of 1w to 3w only with modular lens for batwing shape distribution of 30 degree & 60 degree,input voltage working range is 140 vac to 270 vac,brand name should be embossed,potted driver is used with 4kv internal & external 5kv potted surge protection,short circuit protection,open circuit protection,high & low voltage protection,fixture should withstand high & low voltage protection,fixture should withstand high voltage upto440 v for 8 hr,ip66 protected,thd10%,cri>70 cct 5700+/-300k, pf>0.9, driver efficiency>85%,lm79 report required from nabl accredited lab. including taking down old unserviceable fittings and bracket house must be adjustable or if required any cost of all fixing hardware shall be included in quoted rate complete all as specified and directed by eic. note : 1. engraving of ca number on each lighting fitting (street light / flood light) shall be carried out by the contractor and the cost of the same shall be deemed to be included in the quoted rate. 2. no extra payment shall be made on this account.3. the complete fitting along with led module, driver, surge protection device and all as
Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security lightfitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street lightfittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to lightfitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po
Tender For corrigendum : repair and maintenance of lt panel, cable, street light and connected item of works and miscellaneous items and maintenance of area lighting under ge (af) lohegaon at 2 wing af stn pune
Tender For supply of 30 watt led street light with fitting for outdoor lighting confirming to west central railway specification no. wcr/jbp/specification/ (gs)/002 (rev.0)/2026 (attached) for energy efficient led based luminaire for outdoor application. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For corrigendum : supply of 30 watt led street light with fitting for outdoor lighting confirming to west central railway specification no. wcr/jbp/specification/ (gs)/002 (rev.0)/2026 (attached) for energy efficient led based luminaire for outdoor application. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For supply of 30 watt led street light with fitting for outdoor lighting confirming to west central railway specification no. wcr/jbp/specification/ (gs)/002 (rev.0)/2026 for energy efficient led based luminaire for outdoor application. [ warranty period: 72 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For supply of lt xlpe aerial bunched cable, 1100v grade, 5 core configuration: (3 cores x 95 sqmm aluminium phase conductor + 1 core x 50 sqmm aluminium insulated neutral cum messenger conductor + 1 core x 16 sqm)(street lighting). item rates should be quoted excluding gst in column 7. please indicate gst percentage separately in column 8. all other charges, taxes, and transportation costs shall be borne by the supplier up to the site.
Tender For bid to ras supply of bi directional runway edgelightfitting complete with clear filter , bi directional runway edgelightfitting complete with clear or yellow filter , bi directional runway edgelightfitting complete with red or blank filter , turning pad edgelightfitting complete , taxi way edgelighting fitting complete , uni directional runway end lightfittings complete , uni directional runway end light red spreader lens , isolating transformer 200 w , isolating transformer 15 w , primary cable 1c x 6 sqmm , single integral piece reflector , 105 w reflector type halogen lamp , 200 w bi pin halogen lamp , led module 15 w , connector kit for 1c x 6 sqmm primary cable , connector kit for secodary cable 2c x 4 sqmm , 180 degree clear filter , 180 degree yellow filter , 360 degree outer clear filter , 360 degree inner clear filter , bi pin lamp holder , base plate gasket , breakable coupling , m10 ss bolts, nut washer , wind cone indicator and connected items , power cable 3 core 10 sqmm , pvc insulated power cable 4 sqmm 2 core , led security light 70w , supply of 65ah battery , supply of mother board , supply of hdpe pipe ) /bid number : gem/2026/b/7491971 * /dated: 12-05-2026 & & / bid document 1 / 29
Tender For tender for supply of glf spares at gaya ji airport -supply of 200w 6.6a bi-pin halogen lamps for runway edgelight cat no. 64386 osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 105w 6.6a bi-pin halogen lamps cat no. 64339a osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 105w 6.6a bi-pin halogen lamps cat no. 64339b osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 200w 6.6 a halogen lamps osram cat no. 64382 hlx-a 200w-15 6.6a pk30d.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make bi-pin lamp holder suitable for 200w , 6.6 a halogen lamp as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 45 watt , 6.6 amp bi-pin halogen lamp suitable for taxiway edgelightfitting. bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 200 w 6.6/6.6a , 5 kv rating isolating transformer.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 16 sqmm 5 kv grade plug and receptacle.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 6 sqmm 5 kv grade plug and receptacle.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of industrial type electronic siren.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of driver unit vardhman make taxiway led fitting.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of vardhman make 360 degrees blue lens for taxiway fitting.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 360 degree outer clear lens for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 360 degree inner clear lens for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree red filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree yellow filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree clear filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of red filt
Tender For supply of "operation of baggage handling system ( both arrival and departure ) by engaging following minimum man power. a) electrician cum operator/ technician - skilled - 04 nos ( all days including weekly offs & holidays).b) skilled - 01 no. for data entry & other miscellaneous work (in general shift for six days in a week )note- contractor has to provide reliever on weekly offs / holidays of above required staffs except for sl. no. b) ", supply of red outer lens for rwy end light suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of green outer lens for rwy threshold light suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of yellow filter for runway edgelight suitable for existing airfield ground lighting system (agl) complete as required .( existing light fixture is of vardhman make ), supply of 200w, 6.6/6.6a halogen lamp pk30d(64382 hlx-c) make - osram or equivalent suitable for existing agl/ cat-i fittings complete as required ., supply of isolating transformer of 200 watts, 6.6a/6.6a, 5kv, 50 hz suitable for existing agl/cat-i light fixtures complete as required. , supply of wind socks (cloth) for wdi(white/red) suitable for existing sgs make wind sock., supply of 360 degree outer clear lens for runway edgelightfitting suitable for existing light fixture of vardhman make., supply of clear spreader lens for approach lightfitting suitable for existing light fixture of vardhman make., supply of clear lens for papi suitable for existing papi system of vardhman make., supply of 2cx 4 sqmm. annealed tinned copper conductor pvc insulated pvc sheathed unarmoured flexible afl secondary lead up to voltage garde 1.1 kv conforming to relevant is up to date ammendment complete as required., supply of minimum 9 w led type aviation obstruction light in red colour having die-cast aluminum housing with red polycarbonate dome for better illumination, integral driver, ingress protection - ip65 (make- bajaj or equivalent as approved by eic), supply of 30 w movable led flood light (yellow colour) (make - philips , type - bvp102 30 or equivalent) complete as required at site., supply of 150 a, 1000v, 50 sq. mm terminal block suitable for mounting on din rail suitable for existing panel complete as required at site., supply of led driver of 80w, 25 v suitable for existing airfield signage board (make-electrosystem) installed in operational area complete as required at site., supply of 15 w led suitable for existing taxiway lightfitting of vardhman make complete as required at site., supply of electronic driver suitable for existing 15 w led taxiway lightfitting of vardhman make complete as required at site., supply of mnx 70 type 3 pole power contactor having ac-3 duty, 70a rating, ac1 -100 a rating, coil voltage- 230v ac, suitable for lighting switching applications, panel mounting, conforming to conforming to is/iec 60947-4-1 etc. complete as required., supply of isi marked, heavy duty, rigid pvc conduit, size- 25 mm dia, confirming to is 9537 (part 3) complete as required at site., supply of national flag of size 9144 mm x 6096 mm as per bis specification no is 1-1968 latest complete as required at site. , "supply of 18 mtr length tri-colour led rope light having transparent pvc type body material, ip65 protection, smd led strip as per lm 80/is16106, conforming to is 10322 and suitable for operation on 240 v, 50 hz single phase power supply complete as and when required. (make-philips/halonix/crompton/bajaj/osram) ", providing and fixing of temporary decorative lighting in tri-colors of national flag with led series lighting at terminal building and main gate of ayodhya airport having uniform spacing of between two rows is not to be more than 0.30 mtr for a continious three days on the occassions of republic day/independence day/diwali/new year including