Latest elastic rail clip Tenders | Government elastic rail clip Tenders

CTN :40542799

10 Jun, 2025 12.50 Lacs

South Tripura - Tripura

Tender For procurement and supply of hardware items at various worksites under amarpur/ ompi/ karbook/ silachari r d block under gomati district, tripura - isi market butt hinges incl. screw 100x58x1.90mm, isi market butt hinges incl. screw 75x47x1.70mm, isi market butt hinges incl. screw 50x37x1.50mm, isi market door , window handle 125mm incl. screw made of anodized steel. (tarun/harmoon/pineer), isi market door, window handle 125mm (havey quality) including screw. made of alluminium., sliding door bolt of standard size incl nut and bolts.., isi marked ms sliding door bolt 300 x 16mm incl nut and bolts.., isi market ms sliding door bolt 250x16mm incl nut and bolts.., isi market tower bolt barrel type (200x10mm) incl screws., isi market tower bolt barrel type (100x10mm) / (150 x 10 mm ) incl screws., hooks & eyes-200mm long., hooks & eyes-150mm long., isi market parliamentary hinges with screw (125x125x2.8)mm, isi market parliamentary hinges with screw (75x100x20x2.24)mm, jute rope, coire rope, polythine (thick / thin ), ms ring (50mm dia), black wire, gi wire (8-22 swg), gi plane sheet 0.3 mm thick, net wire mesh of 1st category, ms barbed wire ( 9 kg per sqm), nails 1 , nails 1 , nails 2 , nails 2.5 , nails 3 , nails 4 & above, holding down bolt (16mm), ms hold fast, joint bolt-40mm, joint bolt-25mm, steel handle cum fixer with necessary fitting for steel window., j hook 6mm dia fitted to 40 mm pipe., j hook 6mm dia fitted to 32mm pipe., gi screw 0.5 , gi screw 1 , gi screw 2 , gi screw 3 , door lock below 50mm made of link, door lock 50mm and above made of link, solid pvc plain door isi stansard including all accessories. (sintex), solid pvc decorative door isi standard including all accessories. (sintex), readymade solid wooden door shutter with all accessories isi marked 1st quality, solid flush door of isi standard 1st qulaity made of greenply/ gathani, pvc corrugated fibre sheet for roofing (3000 x 810 x 2 )mm, pvc fibre sheet of size 8 x 4 ( transparent or colored) of isi standard (4mm), ply board of boil quality of 4mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 6mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 8mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 12mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 16mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 20mm thick size-4 x8 made of greenply / gathani / sanctuary, ply board of boil quality of 30mm thick size-4 x8 made of greenply / gathani / sanctuary, hard drawn steel wire fabric (75x 75mm mesh of weight not less than 7.75kg/sqm), gi ridge ( 450 x 600 x 0.2 mm), gi roofing screw, gi washer, 1 mm thick with laminated mica green ply/sanctuary, 40mm pvc beat, heavy duty door closer, heavy duty door stopper, mortice lock, (godrej/link), fan light pivot, 4mm hard board isi standard, 6mm hard board isi standard, glass panes (frosted) 3mm thick and 25 mm width for tiles fitting., glass panes (frosted) 4mm thick and 25 mm width for tiles fitting., m.s. fan clamp (16 mm dia), isi marked parliamentary hinges with screw- (125x125x27x2.8) mm (mowjee), isi marked parliamentary hinges with screw- (75x100x20x2.24) mm (mowjee)

Central Government And Public Sector

CTN :40530265

19 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For fabrication and supply of 1 in 8.5 diamond crossing for 52 kg. complete with double slips (cu rved switches) b.g. for 52 kg. rails on psc sleeper layout complete with cms acute crossing to rdso?s drg . no. t-4867, cms obtuse crossing to rdso?s drg. no. t-5265 and 7000 mm or switches (curved) to rdso ?s drg. no. t-5364 latest alteration complete with all parts as listed in the sub-assembly drawing but exclu ding standard fish plates, fish bolts, elastic rail clips and insulating liners/metal liners and as per irs spe cification irs:t-29-2000 and irs:t-10-2000 with latest alterations. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40531301

06 Jun, 2025 NA

Multi City - Multi State

Tender For goods, manufacture and supply of elastic rail clips mk-v confirming to rdso drg.no.t-59 9 alt-2(latest alteration) and confirming to irs specification for erc s. no. t-31-2021- fifth revision (with am endment-2 & latest alteration) (note: latest alteration wherever used will mean the alterations up to the ac tual date of closing tender. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40538344

16 Jun, 2025 NA

Mughalsarai - Uttar Pradesh

Tender For supply of stopper top for center pivot block for wag-7 loco as per rdso drg no. sk.vl-128 alt-6 (ref. no.5) or latest. [ warranty period: 30 months after the date of delivery ]

CTN :40506950

18 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - counter plate(f5-3-40) , rear valance (plate iv ai) , cover steer column (plate x a) , filter fuel tank (plate iii c) , liner bearing(b4-3-2 by 03) , seal window rh side (plate iv q) , mat rubber (plate viii e) , horn 12v (plate xxiv b) , adaptor elbow (plate xiv d) , pipe brake rightside 80d (plate xxiii c) , base pre cleaner (plate-xxvi b) , adaptor tee (plate xiv b) , pump seal kit (plate xiv b) , pivot block (plate iv u) , gaiter park brake lever (plate iv a) , mounting cab upper blue a post(plate- iv b) , mounting cab upper green b-post(plate-iv-b) , seal fuse box cover (plate iv ae) , pin slew lock (plate vi a) , bracket mounting fire extinguisher (plate vii e) , switch 12 v (plate ix a) , lever loader control assy (plate x b) , lever loader control 3 spoon , spring (plate xi a) , hose top l h by r h hydra (jcb super plate xiii , hose high pressure (plate xiii ab) , setscrew (plate xvi g) , breather (jcb super plate xix f) , bearing(plate-f5-1-20 by 32) , gasket valve block (ctlg 3dx f5-5-10) , brg needle thrust(plate-f5-1-30 by 9) , pipe brake leftside 80d (plate xxiii c) , bearing liner (plate xxxi l) , lever , bottom gear shift , bearing , radio antenna (plate iv f) , guard hose (plate iii d) , hose hybrid rh outer (plate iii f) , hose hybrid lh outer (plate iii f) , speaker (plate iv f) , retainer top (plate iv am) , retainer side (plate iv am) , switch hand break by brake lamp switch open(c1-16-1) , lever excavator control left hand x pattern , loader excavator control right hand x pattern , adapter filtered m oblique m (plate xv d) , setscrew (plate xvi n) , bolt 1 inch unf x 8 inch long torque 607n-m (jcb super pla , plate brake friction (plate xix c) , ring backup (jcb super plate xix d) , seal astics male assy , brake hose 1 by 4 x 580m (plate xxiii c) , fuel line tank to water separator(plate xxx a) , ball bearing , hose hybrid rh inner (plate iii f) , clamping ring (plate iv y) , cover inner fender rh (plate iv z) , bearing trunnion ram pivot (plate vi y) , pin spring 8 mm clevis (plate x b) , adaptor suction (plate xiv b) , combi seal , disc spring , clip hose (plate xxviii b) , valve non return assy (plate xxx a) , pivot pin , mounting cab lower red b-post(plate-iv) , grommet 22.2mm hole dia by 39.7mm 00 , pivot pin , hose wa feed pipe (jcb super plate xiii d) , adaptor , seal(plate-f1-6-10) , ring backup (jcb super plate xix d) , bearing , pin pivot 44.45 by 44.35x184(plate xxxi f) , hose bsp hp 650mm (jcb super plate xiii o) , hose 1 by 4 bsp 1270mm (plate xiii y) , hose lp 2400 mm (plate xxviii d) , reservoir brake (plate xxiii a) , catch side window lockback (jcb 3dx super page-89) , liner brg 70 mmx60mmx62mm long , pivot pin (ispl sl no 501) , filter breather cap(jcb super iii d-2) , switch panel (plate ix a) , retainer hose (plate iii aa) , cover excavator control lever (plate iv y) , bulk head seal (plate iv am) , lock boom (plate vi v) , brake hose 1 by 4x 760m (plate xxiii c) , lock grille (plate iii q) , pin pivot back(item no-621) , spool adapter solenoid (plate xxi c) , shaft selector (plate xxi c) , brg needle roller , bracket (plate xxx a) , hose 1300 mm (plate xxx b) , plate shim , clutch 1.2mm a by r (jcb super plate xx , sensor vacuum 80m bar (plate xxiv b) , pin pivot union(sl-2240) , side cutter(ms sl-21) , side cutter (plate xxxi v) , bracket engine mounting lh (plate iii n) , gas strut , 700m (plate iii b) , pin pivot (plate iii g) , hose 600 mm (plate xiv d) , pivot pin , hose 06 bsp lp 105 (plate iv a) , pin pivot (plate v j) , switch panel (plate ix a) , panel 12v 2 position (plate ix b) , hose(plate-e1-13-1) , gear planet , brake plate coupling , bearing tapper roller(f5-1-20) , bearing tapper roller(f5-1-20) , pipe pre cleaner (plate xxvi a) , hose (plate xxvi a) , harness grid heater (plate xxvii a) , hose water separator (plate xxx a) , pin pivot (plate xxxi b) , piston oil , console front (plate iv aa) , bearing 50.94x55.9x40 long (plate v i) , bearing tapper

Central Government/Public Sector

CTN :40510252

04 Jul, 2025 NA

Ahmedabad - Gujarat

Tender For manufacture and supply of elastic rail clips (erc) mark-v confirming to rdso drawing no.t-5919 alt.2(or latest alterations if any)with f lat toe suitable to 60 kg (uic) & 52 kg rails, as per confirming to irs specification s.no.t-31-2021 with corrigendum no. 2 or latest (thealteration in drawing and specification issued by rdso as on tender closing date shall be applicable in this tender) [warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40485914

25 Jun, 2025 NA

Bilaspur - Chhattisgarh

Tender For supply of cms crossings-60 kg 1 in 16 conforming to rdso drg no t-5693, alt.03 (or latest altera tions) complete with fittings as listed in the drawing excluding grooved rubber sole plates, check rails , insulating liners, fish plates, fish bolts with nuts, elastic rail clips etc specification: irs t-29 2023 with latest alterations.the term "latest alterations" wherever used will mean the alteration up to the a ctual date of opening of tender as per drg.no. rdso drg no t-5693 specn: irs t-29 2023 with latest a lt. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38884100

16 Jun, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For fabrication and supply of 7000 mm or switches [curved] for 1 in 8.5 diamond crossing with double slip bg for 52 kg. rails [uic] on psc sleepers layout to rdso drg. no. t- 5364/ latest alteration & spn, irs/t-10-2000 for fabricated switches corrigendum no 01 of dec 2016 (complete with all parts listed in the sub assembly drawings but excluding standard fish plate, fish bolts, elastic rail clips and insulating liners/metal liners) as amended upto date of closing of tender..note:: latest alteration/ corrigendum wherever used will mean the alterations/ corrigendum up to the actual date of closing tender for which no additional payment shall be made

Central Government/Public Sector

CTN :40475573

18 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For rate contract for manufacture and supply of elastic rail clip j(erc-j) to rdso drg no.t-8258 (alt- 1) with latest alteration upto date of tender notice, and conforming to irs t-31-2021(fifth revision) with corrig endum no.2 and latest alteration as amended upto date of tender notice. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government/Public Sector

CTN :40460993

26 Jun, 2025 NA

Valsad - Gujarat

Tender For manufacture and supply of elastic rail clips (erc) mark-iii confirming to rdso drawing no.t-3701 alt.7 (or latest alterations if any) with flat toe for suitable to 60 kg (uic) & 52kg rails, and confirming to irs specification s.no.t-31-2021 with corrigendum no 2 or latest if any. (the alt. in drawings & specification issued by rdso up to one month prior to tender opening date shall be applicable in this tender) [ warranty period: 30 mo nths after the date of delivery ]

Elastic Rail Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors