Latest elbow pipe Tenders | Government elbow pipe Tenders

State Government

CTN :45724223

01 Jul, 2026 NA

Rewari - Haryana

Tender For repair and rectification of w/s leakages found in ac pipe c-15 including excavation, bailing out of water providing and fixing of ci detachable joints c-15 suitable for ac pressure pipe marked with is: 8794 for use with ac pipes complete with 2 no. rubber ring marked with is:5382 & is:10292 and appropriate no. of nuts and bolts marked with is 1363 including carriage in all respect and including cost of ac pressure pipe c-15 as per is: 1592 & 2003 complete in all respect to the satisfaction of the engineer-in-charge/ac 100 mm pipe class-15/ at bawwa ,repair and rectification of wis pipeline leakages found in pvc pipe including excavation, bailing out detachable joint suitable for 6kg cm2 pressure pipe marked of nuts and bolts marked with is 1363 the satisfaction of water providing and fixing of pvc with is: 8794 for use with pvc pipe complete with 2 no. rubber ring marked with is and appropriate no. including carriage in all respect and including of pvc pipe isi marked complete in all respect to of the engineer-in-charge/ac 200 mm i/d class-25/at bawwa ,repair of 150mm sluice valve including making m.s spendle, g.m. chuck nut, new chimta, nut bolt, rubber jain, glain dori, grease sluice valve opening and fitting at site, carriage charges from site to work shop and work shop to site including labour charge complete as per specification of engineer-in-charge complete in all respect, /150 mm sluice valves repair / at bawwa

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

Central Government/Public Sector

CTN :45716288

06 Jul, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - icgs c-146; e 18 seawater leakage was observed from port main engine heat exchanger outlet elbow pipe cold repair was carried out by ship staff at sea by using emergency..

Central Government / Public Sector

CTN :45736494

23 Jul, 2026 NA

Kazipet - Telangana

Tender For supply of set of s.s bend pipe consisting of two items-(1) s.s bend pipe assembly for hett-5400 kva transformer as per bhel drg. no. 34661950036, qty/set : 01 no (2) s.s elbow pipe assembly for hett-5400kva transformer from rh to top cover as per bhel drg. no.44661950085,qty/set : 01 no. [ warrantyperiod: 30 months after the date of delivery ] ]

CTN :45733076

06 Jul, 2026 NA

Sojitra - Gujarat

Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.

Central Government And Public Sector

CTN :45723988

07 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - lot of scrap consisting of ferrous junck & corroded material buried in soil, tree, trapped under earth, within bushes, grass, shrubs. lot consisting of mf10 type materials rusted and corroded condition of different type materials liker verious size,, nuts, bolt, rivets,chains, coil spring,air spring assmbly,& suspension with or without rubber attachment, spray tin bottles,small drum capacity 4 ltrs damage condition, electrical boxes,signal boxes,and other boxes, locking plates, cut piece of iron wire, ms iron strip, sheets & cut pieces iron plate, cycles, signal rod, coupler rods,air fillter, hand brake wheel , sackle pin etc,cut pieces of pipes with or without ci. attachments, filters, junk cylinders, junk doors, junk cut pieces of angles ,channels and bars, small parts of c&w and electric loco items junk kuchra, tube light fitting, electric fitting with or without non - ferros attachment etc. different type iron bed,chairs with or without cushan, almirah, table,cooler duct, pipe, rod, bunch of wires, with or without slightly non- ferros & ss attachment etc. fully formed or broken condition as available as in the lot. excluding rail wheels, rails, axle, trolly and cs/1,mt/1 materials. nb:- manual digging and collecting by purchaser on his own arrangement from soil.

CTN :45703661

06 Jul, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of pipe assy , pipe assy metal , pipe intake s a of fuel hose , elbow pipe , pump assy oil , water pump , cam shaft , bolt cyl head , bolt , r0cker , hose assy , lever , gear box oil seal , heand brake cable frt , assy parking brk cable , water saprator , fuel filter , door lock

CTN :45671759

01 Jul, 2026 55.80 Lacs

Bhiwandi - Maharashtra

Tender For providing and supplying spare parts for all type of borewell as per requirement in b.n.c.m.c. area 2026-2027 - providing and supplying spare parts for all type of borewell as per requirment in bncmc area 2026-2027, :item no. 1 : providing and laying in trenches following mm dia. medium grade having embossed as isi mark galvanised iron pipes ?of kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. pwd ssr 2022-2023 pg no 268 41.20,41.21 25 mm dia, 32mm dia, item no. 2 : providing and supplying blue mdpe pipes conforming to iso 4427:1996 manufactured from virgin resin pe 80 food grade compounded raw material having blue colour only with quality assurance certificate from quality agencies like wrc / cipet (india) / dvgm / kiwa / spgn etc. for usage in drinking water system. the cost shall include testing of all materials, inspection charges, transportation up to store, transit insurance, loading, as specified and directed, unloading,stacking excluding gst levied by goi & gom in all respect, etc. complete as specified and directed.mjp dsr 2023-24 pg no 128/1/b 25 mm dia, 50 mm dia, item no 3 providing, erecting and giving test of centrifugal monoblock pump set conforming to is 9079 operating at 2900 rpm with ci impeller, priming funnel, cock, suitable flanges at suction and delivery side. pump shall have common shaft for pump and motor. motor shall be suitable for working on 415 v 10%, 3 ph, 50 hz a.c. supply. motor shall be tefc type. pump set shall be suitable for working at various discharge and head requirements. pump shall be erected on provided c.c. foundation block with suitable foundation bolts grouted in c.c. foundation block.centrifugal monoblock pump set (single stage) mjp mech.csr 2023-24 pg no 5 pm 2-1-5] 10 hp, item no 4 : supplying and erecting submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages mjp mech.csr 2023-24 pg no 01 pm 1-2-1,pm 1-2-2] 1.5 hp, 2.0 hp, item no 5 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.75 kw/ 1 h.p., with discharge of 480 to 13 lpm for 10 to 50 mtrhead & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications pwd ele csr 2022-2023 pg no 206 12-6-2, item no 6 supplying & erecting pressure booster pump, single phase, 50c/s, a.c.supply of 0.375 kw/ 0.5 h.p., with discharge of 120 to 12 lpm for 10 to 40mtr head & 25 mm suction/ 25 mm delivery pipe, for domestic pressure boosting applications. pwd ele csr 2022-2023 pg no 206 12-6-1, item no. 7 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. pwd ele csr 2022-2023 pg no 220 12-4-20, item no.8 supplying & erecting automatic control panel for 3 phase , 415 volt, a.c, submersible/centrifugal pump set up to 7.5 hp consisting of dol starter having relay range 9-14 amp,s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. control panel should offer single phasing, phase reversal, phase imbalance etc .pwd ele csr 2022-2023 pg no 204 12-4-17, item no. 9 supplying and erecting d.o.l. starter 400v. 3 phase, 50cycles with no volt coil and overload element with necessarymaterials and connected to supply for 10 h.p., item no 10 supplying & erecting flat flexible 3 core 2.5 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.pwd ele csr 2022-2023 pg no 220 12-4-8, item no. 11 supplying, erecting & terminatin

CTN :45695732

03 Jul, 2026 NA

Bardhaman - West Bengal

Tender For supply of various items required for implementation of mgnregs & vb-g ram g - 1st class picked jhama bricks(traditional) , stone boulder 225 mm above) , stone boulder (225mm-150mm) , laterite boulder , fine sand , medium sand , coarse sand , bamboo (8cm-10cm diaj including fixing , eucalyptus bullah (7.5cm-10cm dia) , eucalyptus bullah (12.5cm-15cm dia) , eucalyptus bullah (17.5cm-20cm dia) , sal bullah (7.5cm-10cm dia) , sal bullah (12.5cm-15cm dia) , sal bullah (17.5cm-20cm dia) , nail , hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings , hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings , hire charges of 5 kva generator , hire charges of 3 kva generator , hire charges of monkey set , loading unloading & stacking sand/stone aggregate (less than 40mm nominal size) , loading unloading & stacking stone aggregate (above 40mm nominal size) , loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material , stone screening type a (13.2 mm) , stone screening type b (11.2mm) , 1st class traditional bricks (kiln burnt) , loading, unloading & stacking by manual means (r.c.c. pipes, c.1. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia , loading, unloading & stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced cement pipes) 900 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia , loading, unloading and stacking by manual means (r.c.c. pipes, c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia , sausage wire net , wood dust , tor steel rods/hysd bars/tmt bars , (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt , bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ss l)(fe415/fe500/fe500d conforms to is: 1786) , tor steel rods/hysd bars/tmt bars (other than sail/tata/rini/jsw/jspl/shyam/srmb/bmasl/elec rosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786) , loading, unloading and stacking by manual means of , steel , neem wood , other local wood , sisu/gamar wood , local sal wood , bright finished or black enamelled mild steel screws , 40 mm , bright finished or black enamelled mild steel screws , 20 mm , bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm. , bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm. , bright finished or black enameled mild steel butt , hinges 100x58x 1.90 mm , coal tarring , fan hook , r.c.c ventilator of 20 mm. thick upto 0.10 sq.m. area , r.c.c ventilator of 20 mm. thick above 0.10 sq.m. area , udaypur marble slab (for floor, lobby etc) 18 mm. thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m , udaypur marble slab (for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m , chawk dungri marble slab (for wall/dado) 18 mm. thick of size 0.3 sq m to 0.6 sq m , frp composite door frame 66mm x 70mm. , frp composite door frame 66mm x 90mm , coloured pedestal type w.c. pan 580x440 mm , 32 mm dia polythene flush pipe , 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble) , gl pipe 32 mm dia medium quality for underground works , gl pipe 40 mm dia medium quality for underground works , cpvc (chlorinated polyvinyl chloride) pipes (15 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (20 mm dia) (for concealed work] , cpvc (chlorinated polyvinyl chloride) pipes (25 mm dia) (for concealed work) , thermocol 12.5 mm thick. , chromium plated stop cock (equivalent to code no. 513(a) & 513(8) & model - tropical/sumthing special of essco or similar brand). , chromium plated angular stop cock with wall flange (equivalent to code no. 5053 & model - flore

Central Government/Public Sector

CTN :44184374

29 Jun, 2026 NA

Nashik - Maharashtra

Tender For bid to ras corrigendum : tender for supply of osaero job work for manufacturing of 112 parts ref semfg 859 part 1 c c - eye bolt , eye bolt , external body , inner body , pipe connection , hatch , body , tightening device , fork , body , threaded bush , angle , bracket , connecting pipe , elbow , angle , elbow , elbow , elbow , elbow , swaging nut , cylinder , connector , angle , screw angle , screw-in elbow , screw angle , screw angle , screw in adapter , screw in elbow , elbow , elbow , elbow , elbow , elbow adapter , adapter t-piece , t-piece , angle , t-piece , roller , pipe connection , body , body , body , hinge , screw angle , bush , bush , screwing t-piece , screw in adappter , cover , knob , elbow , threaded elbow , t-piece , screw angle , male elbow , t-piece , screw-in-elbow , screw-in-elbow , screw-in-elbow , screw angle , cover , body , body , body , seat , frame , cover , cover , elbow , elbow , body , pipe connection , elbow , tip , flange , body , chuck , plate , tip , branch pipe , branch pipe , branch pipe , angle , body , angle , chuck , chuck , roller , elbow , elbow , pipe connection , valve , body , cover , valve guide , valve , elbow , angle , body , sphere , coupling , lug , bracket , stud(pin) , splined bush , roller (throttle assembly) , bracket (throttle assly) , slide block , priority handle (throttle assembly) , platform

Elbow Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector