Latest elcometer Tenders | Government elcometer Tenders

Central Government/Public Sector

CTN :40917610

16 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of mechanised scratch tester with attachments as per iso 1518-1. technical requirements as per attached annexure-1. make- elcometer, tqc sheen, caltech or similar. [ warranty period: 30 months after the date of delivery ]

CTN :40892519

11 Jul, 2025 NA

Mumbai - Maharashtra

Tender For calibration of elcometer instruments -2025 at bpcl, mumbai refinery

CTN :40873894

04 Jul, 2025 NA

Katihar - Bihar

Tender For supply of digital elcometer for measuring of coating thickness of galvanizing ,paints etc. [ warranty period: 30 months after the date of delivery ]

CTN :40118974

03 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of ultrasound rodent repellant system at bpcl mr - 60.01.29.001.5 - ultrasonic rodent repeller controller , 60.01.29.002.5 - rodent transducer range 500 sq. ft , - supervision for instal comm config , - amc of rodent repellant sys year 1 , - amc of rodent repellant sys year 2 , - amc of rodent repellant sys year 3

State Government

CTN :40771915

14 Jul, 2025 NA

Dumka - Jharkhand

Tender For supply of machine, equipment and others - list of machine and equipments, laproscopic hd camera brand - karl storz/conmed/olympustechnical specificationresolution: 1920x1200 pixes / 1900x1000 pixescable length: 300 cm, ultrasonic harmonic scalpelbrand - johnsontechnical specificationdimensions: (hxwxd) 5.3" 14.5"x15.2" voltage: 100-240 vac frequency: 50/60 hz rated current: 3 amp , ultrasonic harmonic scalpelbrand - valley labtechnical specification macrobipolar/bipolar: 473 khz sinusoid, 100% duty cycle. seal: 473 khz sinusoid pulsed , hand instruments for laproscopy brand- karl storz/ olympustechnical specification i) veress needle: it should be with spring action blunt style -12 cm: 1 no 10 cm: 1 no 8 cm: 1 no ii) trocar and cannula: 10 mm: 2 nos 7 mm: 1 no. 5 mm 6 nos it should consists of trocar, cannula with insufflation and multifunctional valve and must have pyramidal tip. iii) reducer/reduction sleeve 5 mm. 1 no iv) telescopes: 10 mm- 0 - 1 nos -30 - 1 nos 5 mm-30 1 nos rigid rod lens system provides good resolution and the better dept perception. it should have uniform image brightness and autoclavable. the 300 forward oblique angle and permits for greater latitude for viewing underlying areas under difficult anatomical conditions. v) suction cannula: 10 mm - 1 no 5 mm -1 nos vi) laparoscopic scissors: curved (monopolar metzenbaum dissector 5mm diameter): 1 nosstraight (bipolar): 1 nosperitoneal scissor: 1 nosvii) unipolar forceps (hook & spatula): 2 nos viii) bipolar forceps : 2 nos ix) atraumatic forceps: maryland dissector forceps: : 2 nos. fenestrated forceps: : 2 nos. x) needle holder (flat jaw) with handle : 2nos xi) monopolar cable (reusable):1 nos. xii) bipolar cable (reusable): 1 nosxiii) allis (double row of teeth) grasper: 1 nos xiv) aspiration needle: 1 nos. xv) reducer/ reduction sleeve (5mm): 1 nos xvi) grasping forceps (toothed & rachet 5mm): 2 nos xvii) laparoscopic knot pusher: 1 nos xviii) clip applicator (reusable): 5mm -: 1 nos : 10 mm: ino xix) uterine manipulator: 1 nos xx) clips( medium & large) xxi) drilling needle: 1 nosxxii) infiltration needle: 1 nos xxiii) biopsy forceps (toothed punch biopsy): 1 nos xxiv) myoma fixation screw: 2 nos xxv) tissue morcellator with base unit & accessories: 1 nos , dual wavelenght laserbrand- zeisstechnical specification laser type: diode, semiconductor wavelength : 1470nm+635nm max power: 15 watts/1470nm+5mv/635 aiming beam : 635nm/1, 4mw max or 515nm/2, 5mw max operation mode : continuous or modulated pulsed time : 0.05ms-1000ms beam delivery : sma905 connector optic fiber compatible : optic fibers having a core from 200um to 1000um, na=0.22~0.48 beam emission initiation : footswitch controller :microprocessor display : 10.1" ips with touch panel medical approved cooling : internal, air and thermoelectric cooling power supply of the laser: dc 24v/8.33a from the separate ac power supply of ac adapter : single phase 100-240va; 50-60hz, max 90w ac adapter dc 24v/8.33a medical approved laser dimensions: 27cm*24,5cm x 9cm laser weight: 2.75kg laser case dimensions : 53cm x 38cm x 23cm weight of laser with cases : 9kg environmental conditions during work : from +10 to 24 c degree, relative humidity from 30% up to 60% cass of medical device iib laser safety class 4 electric safety class i type b housing protection degree ip20b , hd camera setbrand- karl storz/ olympustechnical specification (i) hopkinsa forward-oblique telescope 30a, diameter 4 mm, length 30 cm, a utoclavable, fiber optic light transmission incorporated, color code ed : 1 nos(ii) telecam c3 : 1 nos(iii) image1 st hx one-chip full hd camera head, 50/60 hz, fixed focus, prog ressive scan, soakable, gas-and plasmasterilizable, focal length f = 16 mm, 2 freely programmable camera head buttons, for use with image1 x-link tc301, tele pack + and tp101 : 1 nos(iv) medical grade surgical monitor - fhd : 1nos(v) cold light fountain power led 175 scb, with integrated karl storz-scb, high-perfo

CTN :40793765

11 Jul, 2025 NA

Ernakulam - Kerala

Tender For supply of elcometer 456 dual fnf probe , elcometer 456 dual fnf separate

State Government

CTN :40739590

25 Jun, 2025 53.25 Lacs

Multi City - Karnataka

Tender For providing, supplying, commissioning of innovation lab equipments for ghs and ghps at mincheri village in ballari taluk, under 2515 kkrdb cmdq for the year2024-25.-"six axis robotic arm consists of axis 6 axis64- bit arm cortex processor 8gb ram 64 gb storage capacity servo motors with 9.6 kg/cm torque payload 200g reach 200 mm usb support port should have 8 mp camera user can add various objects for detection should identify pre trained objects should perform pick and place operation dimension in cm(d x h): 110 x 600 one pair of pcb and mechanical casing should be provided""petro robot should consists of should have 8 mp camera 64 bit arm cortex processor 2-d lidar sensor person recognition object recognition should consists of 4 leg arm should perform forward and reverse motion should have rechargeable battery should have 12 v rechargeable battery power adapter for battery recharge dimension in cm (l x w x h): 62 x 20 x 45one pair of pcb and mechanical casing should be provided tasks performed: 1. walking2. running3. pushups4. dance5. jumping6. sit and stand positions7. lane following""line following robo car should consists of a robotic car with 4 wheels should have 2 ir sensors should have 4 dc motors atmega 328p microcontroller l298 motor driver for direction and speed control dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""obstacle avoidance robo car consists of robotic car with 4 wheels ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""voice controlled robo car should consists of robotic car with 4 wheels dc motors with drives bluetooth controller should perform motions by voice command ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gm one pair of pcb and mechanical casing should be provided""rc tank robot consists rc tank chassis kit 01 esp32 controller led switch 4 dc motors with drive battery 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""iot pack iot based smart agriculture smart agriculture model should include an raspberry pi, a 10 inch lcd display, soil moisture sensor, water pump, and relay to automate irrigation for plants. the soil moisture sensor should continuously monitor the moisture levels in the soil. when the soil is wet, the relay should remain off, preventing the pump from operating. however, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. the lcd display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. microcontroller: raspberry pi soil moisture sensor measures soil humidity levels. dht11/dht22 sensor monitors temperature and humidity. ph sensor checks soil acidity or alkalinity. ldr (light sensor) detects sunlight intensity. rain sensor detects rainfall for irrigation contro

State Government

CTN :40739592

25 Jun, 2025 53.25 Lacs

Multi City - Karnataka

Tender For providing, supplying, commissioning of innovation lab equipments for government high school at banapura village in ballari taluk, under 2515 kkrdb cmdq for the year2024-25.-"six axis robotic arm consists of axis 6 axis64- bit arm cortex processor 8gb ram 64 gb storage capacity servo motors with 9.6 kg/cm torque payload 200g reach 200 mm usb support port should have 8 mp camera user can add various objects for detection should identify pre trained objects should perform pick and place operation dimension in cm(d x h): 110 x 600 one pair of pcb and mechanical casing should be provided""petro robot should consists of should have 8 mp camera 64 bit arm cortex processor 2-d lidar sensor person recognition object recognition should consists of 4 leg arm should perform forward and reverse motion should have rechargeable battery should have 12 v rechargeable battery power adapter for battery recharge dimension in cm (l x w x h): 62 x 20 x 45one pair of pcb and mechanical casing should be provided tasks performed: 1. walking2. running3. pushups4. dance5. jumping6. sit and stand positions7. lane following""line following robo car should consists of a robotic car with 4 wheels should have 2 ir sensors should have 4 dc motors atmega 328p microcontroller l298 motor driver for direction and speed control dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""obstacle avoidance robo car consists of robotic car with 4 wheels ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""voice controlled robo car should consists of robotic car with 4 wheels dc motors with drives bluetooth controller should perform motions by voice command ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gm one pair of pcb and mechanical casing should be provided""rc tank robot consists rc tank chassis kit 01 esp32 controller led switch 4 dc motors with drive battery 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""iot pack iot based smart agriculture smart agriculture model should include an raspberry pi, a 10 inch lcd display, soil moisture sensor, water pump, and relay to automate irrigation for plants. the soil moisture sensor should continuously monitor the moisture levels in the soil. when the soil is wet, the relay should remain off, preventing the pump from operating. however, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. the lcd display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. microcontroller: raspberry pi soil moisture sensor measures soil humidity levels. dht11/dht22 sensor monitors temperature and humidity. ph sensor checks soil acidity or alkalinity. ldr (light sensor) detects sunlight intensity. rain sensor detects rainfall for irrigat

State Government

CTN :40739594

25 Jun, 2025 53.25 Lacs

Multi City - Karnataka

Tender For providing, supplying, commissioning of innovation lab equipments for ghs and ghps at sindhuvala village in ballari taluk, under 2515 kkrdb cmdq for the year2024-25.-"six axis robotic arm consists of axis 6 axis64- bit arm cortex processor 8gb ram 64 gb storage capacity servo motors with 9.6 kg/cm torque payload 200g reach 200 mm usb support port should have 8 mp camera user can add various objects for detection should identify pre trained objects should perform pick and place operation dimension in cm(d x h): 110 x 600 one pair of pcb and mechanical casing should be provided""petro robot should consists of should have 8 mp camera 64 bit arm cortex processor 2-d lidar sensor person recognition object recognition should consists of 4 leg arm should perform forward and reverse motion should have rechargeable battery should have 12 v rechargeable battery power adapter for battery recharge dimension in cm (l x w x h): 62 x 20 x 45one pair of pcb and mechanical casing should be provided tasks performed: 1. walking2. running3. pushups4. dance5. jumping6. sit and stand positions7. lane following""line following robo car should consists of a robotic car with 4 wheels should have 2 ir sensors should have 4 dc motors atmega 328p microcontroller l298 motor driver for direction and speed control dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""obstacle avoidance robo car consists of robotic car with 4 wheels ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""voice controlled robo car should consists of robotic car with 4 wheels dc motors with drives bluetooth controller should perform motions by voice command ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gm one pair of pcb and mechanical casing should be provided""rc tank robot consists rc tank chassis kit 01 esp32 controller led switch 4 dc motors with drive battery 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""iot pack iot based smart agriculture smart agriculture model should include an raspberry pi, a 10 inch lcd display, soil moisture sensor, water pump, and relay to automate irrigation for plants. the soil moisture sensor should continuously monitor the moisture levels in the soil. when the soil is wet, the relay should remain off, preventing the pump from operating. however, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. the lcd display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. microcontroller: raspberry pi soil moisture sensor measures soil humidity levels. dht11/dht22 sensor monitors temperature and humidity. ph sensor checks soil acidity or alkalinity. ldr (light sensor) detects sunlight intensity. rain sensor detects rainfall for irrigation cont

State Government

CTN :40739598

25 Jun, 2025 53.25 Lacs

Multi City - Karnataka

Tender For providing, supplying, commissioning of innovation lab equipments for government high school at sirivara village in ballari taluk, under 2515 kkrdb cmdq for the year2024-25.-"six axis robotic arm consists of axis 6 axis64- bit arm cortex processor 8gb ram 64 gb storage capacity servo motors with 9.6 kg/cm torque payload 200g reach 200 mm usb support port should have 8 mp camera user can add various objects for detection should identify pre trained objects should perform pick and place operation dimension in cm(d x h): 110 x 600 one pair of pcb and mechanical casing should be provided""petro robot should consists of should have 8 mp camera 64 bit arm cortex processor 2-d lidar sensor person recognition object recognition should consists of 4 leg arm should perform forward and reverse motion should have rechargeable battery should have 12 v rechargeable battery power adapter for battery recharge dimension in cm (l x w x h): 62 x 20 x 45one pair of pcb and mechanical casing should be provided tasks performed: 1. walking2. running3. pushups4. dance5. jumping6. sit and stand positions7. lane following""line following robo car should consists of a robotic car with 4 wheels should have 2 ir sensors should have 4 dc motors atmega 328p microcontroller l298 motor driver for direction and speed control dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""obstacle avoidance robo car consists of robotic car with 4 wheels ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""voice controlled robo car should consists of robotic car with 4 wheels dc motors with drives bluetooth controller should perform motions by voice command ultrasonic sensors 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gm one pair of pcb and mechanical casing should be provided""rc tank robot consists rc tank chassis kit 01 esp32 controller led switch 4 dc motors with drive battery 4 dc motors with drive esp32 controller dimension (l x w x h): 70 x 19 x 22mm shaft length (mm): 8.5 shaft diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side) rated torque (kg-cm): 0.8 gearbox shape: straight weight: 250gmone pair of pcb and mechanical casing should be provided""iot pack iot based smart agriculture smart agriculture model should include an raspberry pi, a 10 inch lcd display, soil moisture sensor, water pump, and relay to automate irrigation for plants. the soil moisture sensor should continuously monitor the moisture levels in the soil. when the soil is wet, the relay should remain off, preventing the pump from operating. however, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. the lcd display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. microcontroller: raspberry pi soil moisture sensor measures soil humidity levels. dht11/dht22 sensor monitors temperature and humidity. ph sensor checks soil acidity or alkalinity. ldr (light sensor) detects sunlight intensity. rain sensor detects rainfall for irrigat

Elcometer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government