Latest electric boiler Tenders | Government electric boiler Tenders

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government And Public Sector

CTN :45549269

23 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For supply of water boiler capacity-30 ltrs, confirming to is: 3412 along with a control box, necessary plumbing & tap arrangement on a common base plate confirming to rcf spec.no.edts-118 (rev.b) & drg.no.lc72211, alt.b or latest. as per drg.no. drg.no.lc72211, alt.b or latest specn: rcf spec.no.edts-118 (rev.b) [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45549948

23 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For supply of water boiler capacity-30 ltrs, confirming to is: 3412 along with a control box, necessary plumbing & tap arrangement on a common base plate confirming to rcf spec. no. edts-118 (rev. e) am-2, corr-1,2,3 without annexure-1 & drg. no. lh72211, alt.b or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

corporations/Associations/Others

CTN :45522614

16 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s boiler water wall panel scrap,u/s crusher hammer scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s gear box sdn-630 (write off),u/s battery scrap (25kg),u/s scrap esp discharge electrode ms frame

corporations/Associations/Others

CTN :45238886

16 Jun, 2026 3.56 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of air filter regulator of boiler and milling system - as per item specification , as per item specification , as per item specification , as per item specification , as per item specification , as per item specification , as per item specification , as per item specification

Co-operative

CTN :45474707

23 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.i. item on conversion/supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), boiler grate bar material-cont iron. (as per sample/drg.), boiler furnace manage gap bar. (ap per sample/drg.), chief engineer

State Government

CTN :45446346

12 Jun, 2026 14.99 Lacs

Multi City - Telangana

Tender For loading, unloading, and transportation of h2 gas cylinders from stores to unit gas rooms of units 3 and 4,scheduled greasing of ht and lt motors and associated equipment of electrical, boiler, and turbine divisions, topping up of lubricating oils to various plant equipment of units 3 and 4, and providing 1 no tractor on hire basis at stage ii,ytps for the period from the date of commencement of work to 31.03.2027

CTN :45430824

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of lab equipment - basic engineering lab materials, digital balanceweight 500g, accuracy 0.01g, top pan. tare function,caliberation- automatic external display type: led, digital tds meterrange 0-9990 ppm, resolution 1ppm, digital lcd display, atc feature., digital ph meterph range o to 14, resolution 0.01 ph, digital display, joule calorimetercopper vessel, battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), thermometer (alcohol), stop clock, mortar with pestleporcelain/agate,gazed exterior, unglazed grinding surface.item weight 2290 gramsitem diameter 4 inches, water distillation unitoutput capacity: 2 4 liters per hourmaterial: stainless steel boiler and condenserheater: built-in electric heating elementpower supply: 220 240 v ac, 50 hzcooling: water-cooled condensersafety: automatic low water cut-off, ic regulated battery eliminatoric regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometermoving coil type, 30-0-30 scale, sensitivity 20 a/div, resistance approx. 100 ohms., voltmeterdc voltmeter; range 0 10 v, analog , ammeter dc (0 - 2 amp), cdecade resistance box3 or 4 dials, range 0.1 to 100 or 1k , constantan/manganin wire coils., rheostathigh-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., solar cell kitthe apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kitseries arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kitbattery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, meter bridgetype: 1 m length, with uniform wire (resistance wire)material: constantan or manganin (low temperature coefficient)scale: 0 100 cm, engraved or printedbase: wooden or metal, rigid, non-conductive supportjoints / terminals: brass or copper, fixed for connections2. galvanometertype: analog, moving coil or digital (for null detection)range: sensitive to detect micro-ampere currentsinternal resistance: high, typically ~100 or as specified5. cells / power supplytype: leclanch cells (1.5 v each) or dc power supplynumber: 2 4 cells in series (or supply ~3 6 v)

Central Government/Public Sector

CTN :45422268

22 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For different types of levers used in boiler mountings of x-class locomotive consist of 05 items, as follows; 1) lever for regulator, drg. no. goc/x/lr-05-02030, qty- 1 no. 2) lever, drg. no. goc/x/lr-05-02050, qty- 1 no. 3) lever for blower valve, drg. no. goc/x/lr-07-05080, qty- 2 nos. 4) lever, drg. no. goc/x/lr-07-06010 sheet 1 of 1, qty- 2 nos. 5) lever for blower valve gear and front hand rail, drg. no. goc/x/lr-07-06080, qty- 2 nos. note: 1. item 1 to 5 consist of 1 set 2. for equivalent material specification refer goc/x/specx-032 3. for material specification, the firm has to submit nabl accredited lab test certificate along with the material supply [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45439508

09 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of u/s esp/ gi sheet / ms tin scrap,u/s boiler water wall panel scrap,u/s crusher hammer scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap -25 kg,u/s gear box sdn-630 (write off),u/s battery scrap (25kg),u/s scrap esp discharge electrode ms frame

Electric Boiler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors