Tender For maintenance of electrical installation of various e & m works in non-gpra, sector-7, antophill, mumbai - 37. (sh : renovation and strengthening of existing electrical powersupply infrastructure with associated protection and earthing works for improved reliability and safety at building no. 51, phase-ii, sector-vii, antop hill, mumbai-37.subwork/packages:moei of various e & m works in non-gpra, sector-7, antophill, mumbai-37. (sh: renovation and stregthening of existing electrical powersupply infrastructure with assoicated protection and earthing works for improved reliability and safety at building no. 51, phase-ii, sector-vii, antop hill, mumbai-37.
Tender For supply, erection, testing and commissioning of main distribution board (mdb) for electrical powersupply fabricated with 14 swg ms sheet powder coated with red post office colour, double door(frontand back) with locking arrangement with 02 nos incomers and 06 nos outgoing with aluminium bus-bar size 980mm long, 70mm width & 10mm thick. the bus-bar will be fitted on 630a hrc fuse base in incomers 06 nos & 400a hrc fuse base in outgoing 18 nos. note: hrc fuse base should be standard make confirmingto iec 60269 part-ii/is:13703 part-ii. mdb box as per ?drawing? attached. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : providing electrical and mechanical work services at haf gzb sh operation and maintennace of 11 kv and 0.433 kv electrical powersupply and lt feeder pillar at different location at haf hindan and cleaning work at electrical division office sub division office electrical enquiry in domestic area hindan ghaziabad
Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian powersupply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian powersupply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins
Tender For procurement of brake valve sa-9 & a-9, c2w valve repair kit a-9, rubber bellow, split pin, circuit breaker, indication lamp, cabin light, side buffer assembly distributor valve for 700 hp locomotive and bgh wagon and various service kit and spare of dozer at atps, mppgcl, chachai.
Tender For bsl (gs) - augmentation, replacement & modification to increase reliability of electrical powersupply & distribution system of general services.