Latest electric appliance Tenders | Government electric appliance Tenders

corporations/Associations/Others

CTN :43044832

15 Dec, 2025 4.87 Lacs

Kolkata - West Bengal

Tender For re-wiring and replacement of electrical appliances at old executive engineer building under asphaltum department goragacha.

CTN :43004150

11 Dec, 2025 31.57 Lacs

Chennai - Tamil Nadu

Tender For supply and installation of kitchen equipment and allied electrical appliances and providing canteen facilities including kitchen equipments dinning service equipments and furniture facilities at 2nd floor annexure building shastri bhawan chennai 06

CTN :42988193

13 Dec, 2025 NA

Thiruvananthapuram - Kerala

Tender For tender for supply of equipment and tools for setting up of facilitation centre for student innovation - setting up of facilitation centre for student innovation & entrepreneurship under plan fund of government of kerala - equipment, tools & consumables, scroll saw, band saw, belt and disk sander, bench top drill press, bench top mini metal lathe, planer, sheet metal folder, miter saw, bench vices, arc welding machine, dremel 4250-3/50 rotary tool kit, electric router (1300 w, 8 mm bit, variable speed, restart protection) and 15 pc. router bit set, electric planer (710 w, 82 mm width, 2.6 mm depth, 18000 rpm), electric orbit sander (250 w, 12000 rpm, velcro type fastening, micro filter system), handheld blower (16000 rpm, 650 w), 37 piece socket set , hole saw set, riveter set, aviation snips, chisel compass (16"), plastic nipper plier (5"), needle nose miniature plier, tubing cutter 3-28 mm, jaw locking plier (10") - (micro adjusting screw and pressure release lever), t handle socket (8 mm, 6 point socket-hex end), compact frame hack saw (24 t), toolbox with top lid and removable tray compartment (16"), electric hoist, pipe bending machine, digital microscope, weighing scale, virtual instrumentation suite

CTN :42984788

09 Dec, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse confirming to , crushed stone aggregate 20mm graded , crushed stone aggregate 40mm graded , hard core of broken stone aggregate of size 45 to 63 mm , tmt steel bar 12mm dia , binding wire 20 gauge 0 point 9 mm annealed , pre cast pcc block type c1 , pan motor tasala 18 inch dia , showel with wooden handle , wire mess for seving sand 8feet x 5feet , trowels as per isi mark , water level pipe 4mm 15 mtr long , plum bob steel , nylon mason thread 100 mtr long , measuring tape 05 mtr retractable grade ai 16 , gum boot , hand gloves rubber , drilling machine portabled , steel cutter circular saw , cutting blade 4 inch steel , cutting blade 14 inch steel , portable generator set 5 kva , welding rod , welding goggles , welding gloves , portable concrete pump , 10 kl underground fol storage tank , columns , trusses , purlins , roof sheet , ms plate 5 mm thick , ms angle iron , self tapping screw 4 inch , self tapping screw 3 inch , industrial fuel transfer pump , electric wire 2 point 50 sqmm , modular switch and socket combination 05 amp , lightening conductor , pvc pipe 110 mm dia , pvc flexible hose water pipe 20 mm dia , gi elbow 20 mm , gi gate valve connector , gi socket 20 mm with thread , gi union 20 mm , fire extinguisher

CTN :39481967

29 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For corrigendum : supply of veterinary instruments and equipments - allis tissue forceps (20 cm.), artery forceps curved (15 cm ), artery forceps straight (15 cm ), forceps s.s. (20 cm), forceps s.s.(15 cm), haemostat straight s.s.(17.5 cm), haemostate curved s.s. (15 cm. ), mayo s scissors curved isi (s.s. 15cm), mayo s scissors straight isi (s.s. 15cm), scissors straight s.s.(12.5 cm), scissors straight s.s.( 17.5 cm), surgical gloves (standard), surgical mask (standard), suturing needle (assorted size) (traumatic/atraumatic cured/st.), suture thread silk/ nylon (10 mt. reel no.100, 0, 1, 2, 3), chromic cat gut (100, 0, 1, 2, 3 no.), needle holder s.s.(15cm), instrument trolly, dressing drum s.s. round 20 gauge (height 30cmx30cm dia.), b.p. blades (no. 22, 23, 24, 11, 12, 13,14, 16, b.p. handle s.s.(no. 3 ), b.p. handle s.s.(no. 4), kidney tray s.s.(15 cm length), tray small ss (250mmx300mm), hypodermic needle (15 x3/4"), hypodermic needle (18 x3/4"), vaccutainer with needle (with vacuum, 10 ml and needle of double bewell 16 no.), electrcally operated needle and syringe destroyer. destruction rate max. 1 minute per needle of 1.6 mm thickness with 80 mm length. min. 350 cutted hubs of syringes with needle burnt residue., bloodless castrator for small animals 9 (made of special high carbon steel coated for protection against rust formation), castrator imported, i/v fluid stand (s.s.), intra venous set (disposable 0 standard) ), scalp vein set (21 no. 0 22 no.), electric dehorner (30 cm length), trocar canula for sheep s.s.(15 cm), teat syphon (ss), drenching bottle (large) (metal 500 m), drenching bottle (small) (metal 200 ml), doctor coat tericot (free size), plastic apron, macentosh sheet (double colour), rubber arm sleeves with latex gloves (no. 9), gum boot, dog muzzle (assorted size), dog nail cutter (standard), measuring cylinders (50 ml graduated borosil glass ), measuring cylinders of (100 ml graduated borsil glass ), medicine carry bag (nylon 600 dpu coated padded, multipocket for medicine and surgical equipments ), jar with lid ss (2 kg. capacity), jug ss (2 ltr. cap.), thermos s.s. double insulated (1 ltr. cap., 30cm length, 7.5cm mouth dia with soulder carrying strap.), bucket ss (12 ltr capacity), california mastitis kit, centrifuge machine (bench top) for general purpose, canopy tent with carrying bag. frame made of steel powder coated pipe (23 gauge) 0 tetron cover (waterproof) with two folding chairs and one folding table, vaccine carrier (1.6 lit capacity with 4 ice packs), microscope binocular, autoclave electric, calf puller ss 316/304., animal catching device, cold boxes vaccine storage capacity 20 ltr. weight fully loaded 43.3 kg. empty weight 17.5 kg. external surface material plastic, internal lining material plastic , insulation material polyurathene, insulation thickness 110 mm,, refrigerator, thermocautery, veterinary urine analyzer with accessories, animal sling for large animals, cold cabinet/ cold room with 25% capacity of racks as deep freezer and 75 % as cold cabinet having 2-8 degree celcius temperature, digital display, alarm system for temp. beyond set point, hematology analyzer with accessories (three parts), semi automatic veterinary serum analyzer with accessories, verticle cold cabinets for vaccine storage, with storage temperature 2-8 degree celcius. temperature holding time atleast 12 hrs, at power failure. adjustable shelves., hot air oven, incubator, ice liner (ice lined refrigerator or freezer) compressor compartment0 hermetically sealed high quality compressor 230 v 50/60 hz. relatively noise less fan to cool down the compressor. all steel tubes protected with special compound against rust formation. 1 thermostate pre-stetted from the factory for 2 c - 8 . control panel situated at the front of the unit. light indicators for different functions, 1 digital thermometer to indicate the internal temperature, latest cooling system. insulation with thick polyurethane foam. foaming agent- cyclo

Central Government/Public Sector

CTN :42974316

19 Dec, 2025 49.00 Lacs

Delhi - Delhi

Tender For repair/replacement and improvement of mcb dbs, old unsv, items wirings including sub main wiring and other electrical appliances and certain misc repair at arjan vihar, double story, npc, pratap chowk and other unit area under ge (c) delhi cantt-10

Central Government/Public Sector

CTN :42626944

04 Dec, 2025 50.00 Lacs

Delhi - Delhi

Tender For corrigendum : repair/replacement of spare parts of various typesof electric appliances including petty repair & misce/m works including daily maints complaints at rrrc,green meadows, cc hut, artrac hut, artrac hutunder ge (central) delhi cantt

Central Government And Public Sector

CTN :42934948

17 Dec, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of ow to office building and inspection room harpic 1 ltr , harpic floor cleaner , pencil cells aaa , mop 30x30 inch , toilet brush with plastic handle , plastic bucket 20 ltr cello , plastic mug 1 point 5 ltr cello , phenyl gainda 1 ltr , glass tumbler borosil , brooms with long wooden handle , led lamps 15w , towel long size , hand towel , wiper long handle , flask 2000 ml , electric wire 2 point 5 sqmm , charcoal , kangri , bedsheet king size , photostat machine cartridge canon 2224n , door bell , duster cloth , a4 size paper , gsm bond paper 500 pages , photopaper glossy 50 page packet , antivirus quickheal , ink refil epson set , laser jet 1020 cartridge , pen blue gel , pen red gel , file cover , envelope small , envelope medium size , envelope large , packing tape

Central Government/Public Sector

CTN :42947097

12 Jan, 2026 NA

Bhopal - Madhya Pradesh

Tender For corrigendum : supply of electric point machine [rotary locking type] 110 v dc operations

State Government

CTN :42920788

16 Dec, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For supply and execution of various signalling equipments as per boq attached inspection rites consignee - fabrication and supply of point rodding (ground connection) set with insulation complete set for electric point machine 220 mm stroke clamp type for thick web switches as per rdso drg no rds0/s/3454 alt -a ver-1 or latest. (inspection agency:- rites), supply and fixing of gi bend pipe 50 mm dia., bclass, for cable entry into point machine with all accessories. note: th is item to be operated independently for those points where point machines are functional, but gi bend pipe is not provided. for all other new installation of point machines, item 06002 of the sor includes the provision of gi bend pipe. (inspection agency:- consignee), supply of point machine ground connection insulation complete set including for p bracket insulation for point machine irs type 220 mm.(inspection agency:- rites), supply of stretcher bar insulation complete set for point machine irs type 220 mm stroke clamp type.(inspection agency: - consignee)., supply of track lead junction boxes fiber glass as per drg.no. cwm - 00597 of f.r.p material to irs.s.23 specification along with fixtures i.e., on ms angle 50x50x5mm, 0.9 meters long two numbers of g.i. pipes of 25mm dia. along with nuts and bolts and 500mm long (this includes gromite bushes, 60mm pbt terminal). (inspection agency:- consignee), supply of aluminium ladders of height 5 feet for maintainer at relay room and ips room of model no: 8226 of youngman, plantex or similar. (inspection agency: - consignee)., supply of lps 3.00 mm thick rolled copper strip of reputed branded make. (inspection agency: - consignee), supply of insulation resistance tester. make fluke 1507 or similar. (inspection agency:- consignee), supply, fabrication and fixing of the calling on board/bslb board as per rdso drg. no. sa 2373 (adv)/stop/warning board as per drg. no. sa-2380 (adv), or as applicable, on concrete foundation and painting with retro reflective paint. all work to be carried out as per railway site engineer instructions.(inspection agency:- consignee), supply, fabrication and fixing of retro reflective signal number plates as per ncr drg. no. typ/14/0014 dtd 28.11.2014 issued vide ncr letter no. s&t/ ncr/drg/typ dated 28.11.2014, on signal post with contractors own material like clamp, u bolts, nuts etc.(inspection agency:- consignee), supply of digital cable fault locator for metallic s&t cables of reputed make as per tec spn no. gr/tie-05/03, july 2006 & tec 73060:2006 like khushicomms model venus 120 orsimilar branded make. consignee shall approve the supply only after successful demonstration at site(inspection agency:- rites), supply and testing of cable route tracer and marker locator model and make 3m dynatel model locator 2273m or reputed branded make.(inspection agency:- rites), supply, installation and commissioning of central gateway. note: single centre gateway shall cater maximum up to 32 data transmitter node (modbus).(as per annexure a) (inspection agency:- rites), supply, installation, testing and commissioning of data transmitter node in location box. modbus type note: maximum range 400 meter. (as per annexure b) (inspection agency: - rites), supply, installation , testing and commissioning of data transmiter modbus cum repeater for augmenting range of ourdoor data transmiter node (modbus), where distance of location box is more than 400 meter with respect to central gateway.(as per annexure c) (inspection agency:- consignee), apparatus case led indication status display unit cum allarm system for yard.single display system shall cater to maximum 45 no of location boxes.(as per annexure d)(inspection agency:- consignee), fabrication, supply and fixing of p, c, a, g, ibs etc. marker disk painted and lettered with enamelled paint of approved colours, on signals, conforming to rdso drg. no.sa - 23456, as per standard practice and technical specifications.(inspection agency:- consig

Electric Appliance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

State Government