Latest electric control panel repair Tenders | Government electric control panel repair Tenders

CTN :45048307

31 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : : supply, installation, testing & commissioning of electrical equipment for dg block 119a of inrp - ht panels (119a)supply, installation, testing & commissioning of indoor type floor mounted, single front, metal clad, 1250 a, 6.6 kv, 3 phase, 3 wire, vcb switchgear panel suitable for a short circuit current of 31.5 ka for 3 seconds, internally arc tested for 31.5 ka for 1 second, comprising of following incoming & outgoing feeders : incoming feeder: 1 no. 1250 a, 3p vcb outgoing feeders: i) 7 nos. 630 a, 3p vcbii) 1 no. 1250 a, 3p vcb as tie feederwith surge arrestors, relays, pts, cts & other necessary accessories including associated structural steel required for complete installation of the panel & equipment earthing of the panel from both the earthing terminals of the panel to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings. reference drg. nos: ip1/119a/05027339/dwg/001/r0 & ip1/119a/05027339/dwg/002/r0(note: terminal box of each incomer of 6.6kv switchboard shall be suitable for terminating 4x3cx400 sq.mm., 6.35/11kv (e), a2xwy cables.), supply of spares for ht panels as per attached spares list mentiond in section c, part ii of tender, 2.5 mva, 6.6/0.433 kv dry type transformers (119a)supply, installation, testing & commissioning of 6.6/0.433 kv, 2.5 mva, dyn11 dry type cast resin transformer having percentage impedance of 8.5% complete with ht cable end box, lt bus duct flange, off load tap changer on ht side with range of +/-5% in steps of 2.5%, wti scanner, ct for restricted earth fault protection and other necessary accessories including associated structural steel required for complete installation of the transformer & equipment & neutral earthing of the transformer from both the earthing terminals of the transformer to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & drawings.reference drg. no. : ip1/119a/05034347/dwg/001/r0, supply of spares for dry type transformers as per attached spares list mentiond in section c, part ii of tender, 2000 kva diesel generator sets (119a)supply, installation, testing & commissioning of 3 phase 2000 kva prime power 433v, 50hz, 0.8 p.f. diesel-generator sets with 110% overload capacity for 1 hr with four (4) stroke inline or vee type cylinder arrangement having engine speed 1500 rpm, 24v electric battery starting system with a provision of interchangeability of battery bank between two dg sets, complete with all auxiliary equipment including amf control panel, auxiliary mcc panels, heat exchanger cooling system, raw water pump, remote radiator with fans on terrace, ms exhaust piping, exhaust structure (maximum 30 m stack), 4 nos. of 3.6 cubic metre fuel day tank outside dg building (for all 4 dg sets) & 1 no. of 990 ltr intermittent tank inside each dg room, ms "c" class fuel piping between engine & fuel tank, dg room accoustic treatment & complete ventilation of dg room, brushless excitation for alternator, one no. 3200 amp 415 v 4p acb, ms structural steel supports/ channels/ angles & other necessary accessories including associated structural steel required for complete installation of the dg & equipment & neutral earthing of the dg from both the earthing terminals of the dg to the nearest earthing grid conductor existing at site using copper conductors of size as per tender technical specifications & necessary statutory clearances from cpcb etc. as required and as per tender technical specifications & drawings. design and construction of foundation for exhaust pipe rack/ structure of dg set is included in the scope of the contractor.reference drg. nos. : i) ip1/119a/05034347/dwg/001/r0ii) ip1/119a/05044831/dwg/003/r0iii) ip1/119a/05044831/dwg/004/r0iv) ip1/119a/05044831/dwg/005/r0v) ip1/119a/05044831/dwg/006/r0, supply of sp

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

CTN :45475408

22 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/

corporations/Associations/Others

CTN :45295909

30 May, 2026 4.31 Lacs

Surendranagar - Gujarat

Tender For providing, supplying and installation of pump set, penal board andmiscellaneous items for water works department at thangadh municipalityarea, at thangadh. (second attempt) - pump sets, electric motor (lt/ht), electrical control panel, (lt), soft starter, plc, automation & system, integrator

Central Government/Public Sector

CTN :45036463

25 May, 2026 NA

Nasirabad - Rajasthan

Tender For corrigendum : repair and replacement of lt distribution network system, unserviceable lt ug cable, lt joint finding faults, lt equipment, control gear, lt panel connected items including load balancing of external electric supplys at nasirabad mil station under ge

Central Government/Public Sector

CTN :44533543

13 Apr, 2026 NA

Pali - Rajasthan

Tender For corrigendum : repair and replacement of lt distribution network system, unserviceable lt ug cable, lt joint finding faults, lt equipment, control gear, lt panel connected items including load balancing of external electric supplys and repair/ replacement / mainten - repair and replacement of lt distribution network system, unserviceable lt ug cable, lt joint finding faults, lt equipment, control gear, lt panel connected items including load balancing of external electric supplys and repair/ replacement / maintenance of street lights, security lights, timer switch and connected work at ajmer mil stn under ge nasirabad

State Government

CTN :44570290

02 Apr, 2026 NA

Junagadh - Gujarat

Tender For annual rate for supply material of water work department repairing & new work for visavadar nagarpalika at, various area of visavadar, district: junagadh - pump sets electric motor (lt/ht) electrical control panel (lt) soft starter plc automation & system integrator

Electric Control Panel Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government