Latest electric hand blower Tenders | Government electric hand blower Tenders

corporations/Associations/Others

CTN :40580844

03 Jul, 2025 NA

Kolkata - West Bengal

Tender For customized amc/cmc for pre-owned products annual maintenance contract of fdas and gdas; amc of fdas and gdas; annual maintenance contract (amc); monthly; no-(a) monthly routine- cleaning of all detectors and panels with blower/other best engineering practices to maintain/upkeep of good electrical hygiene of system and its accessories. (b) continuity checks of electrical supply line from sensors to repeaters/master panel and proper fixing of in-secured devices such as panels, detectors, hooters and manual call point, etc. (c) on completion of service, maintenance of panels and sensors to be undertaken with complete trials of both the systems in presence of mint officials and trial report for the same to be submitted. (d) at the time of inspection and maintenance job if any major spares are found defective, the same must be informed to india government mint kolkata officials who will arrange for the same. the spares must be replaced in their presence. (e) the response period for any defects aroused in system is to be attended within 48hours..

Central Government/Public Sector

CTN :40004584

05 Jun, 2025 2.30 Crore

Goa - Goa

Tender For bid to ras bid to ras supply of supply and fixing of automatic bar screen , supply and fixing of sewage transfer pumps , supply and fixing of dissolved air flotation system , supply and fixing of fog free water transfer pumps , supply and fixing of fog transfer pumps , supply and fixing of bio media mbbr stream 1 and 2 , supply and fixing of tube settler media settling tank 1 and 2 , supply and fixing of air blower with motor , supply and fixing of diffusers for aeration tank stream 1 and 2 , supply and fixing of diffusers for anoxic tank stream 1 and 2 , supply and fixing of filter backwash pumps 1 working 1 stand by , supply and fixing of do indicating controller cum transmitter , supply and fixing of pressure sand filter , supply and fixing of activated carbon filter , supply and fixing of basket strainer , supply and fixing of dosing system , supply and fixing of flow meter emf , supply and fixing of flow meter , supply and fixing of gratings , supply and fixing of level switch , supply and fixing of sludge fog and f fat, oil, grease and floatables compactor , supply and fixing of sludge dryer , supply and fixing of 100mm dia upvc pipe , supply and fixing of 80mm dia upvc pipe , supply and fixing of 63mm dia upvc pipe , supply and fixing of 50mm dia upvc pipe , supply and fixing of 4 inch butterfly valves , supply and fixing of 3 inch butterfly valves , supply and fixing of 2 and half inch butterfly valves , supply and fixing of 2 inch butterfly valves , supply and fixing of 4 inch flop type , supply and fixing of 3 inch flop type , supply and fixing of 2 and half inch flop type , supply and fixing of 2 inch flop type , supply and fixing of mf backwash pump , supply and fixing of bag filter , supply and fixing of strainer , supply and fixing of micro filtration module , compressor for automation valves and mf air scoring , supply and fixing of automation panel , supply and fixing of automation valve , supply and fixing of automatic reject control valve , supply and fixing of air relief valve , supply and fixing of air flow meter , supply and fixing of pressure gauge , supply and fixing of pressure transmitter for mf , supply and fixing of cip pump , supply and fixing of mf skid , sitc of electrical panel 125a panel 1 , sitc of electrical panel 125a panel 2 , sitc of electrical panel 125a panel 3 , supply and fixing of lt cable 2c x 1 point5 sq mm , supply and fixing of lt cable 3c x 1 point5 sq mm , supply and fixing of lt cable 2c x 2 point5 sq mm , supply and fixing of lt cable 3c x 2 point5 sq mm , supply and fixing of lt cable 3c x 4 sq mm , supply and fixing of lt cable 3c x 6 sq mm , laying of lt cable 35 sq mm , supply and fixing of lt cable 300mm x 50mm x 1 point 6mm , supply and fixing of lt cable 100mm x 50mm x 1 point 6mm bid details/ 2 / 61

Central Government/Public Sector

CTN :40578319

23 Jun, 2025 9.99 Lacs

Ganjam - Odisha

Tender For annual rate contract for spares of air conditioners - capacitor running 2.5 mfd (ac), capacitor running 3.0 mfd (ac), capacitor running 4.0 mfd (ac), capacitor running 6.0 mfd (ac), capacitor running 45 mfd (ac), capacitor running 50 mfd (ac), capacitor running 55+4 mfd (ac), capacitor running 60 mfd (ac), capacitor running 60+4 mfd (ac), brass flare nut 1/2 (ac), brass flare nut 1/4 (ac), brass flare nut 3/8 (ac), brass flare nut 5/8 (ac), copper pipe 1/2 (ac), copper pipe 1/4 (ac), copper pipe 3/8 (ac), copper pipe 5/8 (ac), nitrile rubber insulation 1/2 (ac), nitrile rubber insulation 1/4 (ac), nitrile rubber insulation 3/8 (ac), nitrile rubber insulation 5/8 (ac), brass liquid line valve 1/2 (ac), brass liquid line valve 1/4 (ac), brass liquid line valve 3/8 (ac), brass liquid line valve 5/8 (ac), welding stick (ac), wrapping tape (ac), copper coil condensing for 1.5 ton split (non inveter ac), copper coil condensing for 2.0 ton split (non inveter ac), copper coil condensing for 1.5 ton (split inverter ac), copper coil condensing for 2.0 ton (split inveter ac), compressor for 1.5 ton (split ac) - r22 gas, compressor for 2.0 ton (split ac) - r22 gas, compressor for 1.5 ton (split ac) - r32 gas, compressor for 2.0 ton (split ac) - r32 gas, compressor for 1.5 ton (split ac) - r410 gas, compressor for 2.0 ton (split ac) - r410 gas, compressor for 1.5 ton (split inveter ac) - r32 gas, compressor for 2.0 ton (split inveter ac) - r32 gas, compressor for 1.5 ton (split inveter ac)- r410 gas, compressor for 2.0 ton (split inveter ac) - r410 gas, outdoor dc motor for inverter ac, universal/suitable pcb for 1.5/2.0 ton (split ac), universal/suitable pcb for 1.5/2.0 ton (inverter split ac), refrigerant gas r-22 (ac), refrigerant gas r-32 (ac), refrigerant gas r-410 (ac), lpg gas welding can (ac), condenser coil cleaner (ac), fan blade odu 1.5 ton (split ac), fan blade odu 2.0 ton (split ac), indoor unit blower assembly 1.5 ton (split ac), indoor unit blower assembly 2.0 ton (split ac), indoor unit motor 1.5 ton (split ac), indoor unit motor 2.0 ton (split ac), outdoor unit motor 1.5 ton (split ac), outdoor unit motor 2.0 ton (split ac), indoor unit swing motor (ac), outdoor unit electrical contactor (ac), compressor thimble (ac)

CTN :40570953

12 Jun, 2025 8.00 Lacs

Ponnani - Kerala

Tender For supply of instruments for poly dental clinic - equipments and instruments, vertical autoclave, dentsply x-mart plus endomotor, woodpecker apex locator, waldent endo pro cordless endomotor, waldent obturation pen system, endoking dental loupes, woodpecker hw-3h scaler handpiece, alpha dent file removal system, endodontic ruler, gdc titatium coated composite instrument set, endodontic box (stainless steel), composite polishing strips, composite polishing bur kit, nsk air rotar handpiece, nsk straight micromotor handpiece, nsk contrangle micromotor handpiece, gdc extraction forceps kit (12 pieces)(efsp 12) set, gdc root elevator set(9 pieces) set, gdc root bernard elevators right set, gdc root bernard elevators left, gdc periotsteal elevators, gdc scissors iris-straight(11.5cm), gdc extraction forceps pedo (full set), gdc root elevators warwick james straigtht, gdc root elevators warwick james right, gdc root elevators warwick james left, gdc oral surgical impaction kit (osip 22), gdc root elevator (e 302), gdc seperating upper molar forceps (fx 55 s), gdc seperating lower molar forceps (fx 56 s), suction apparatus, artery forceps, scissors curved, bone rongeur, bp handle, needle hloder straight, needle hloder curved, cheek retractors, curette, gdc uppe root forceps f x 41 s, gdc uppe root forceps f x 44 s, gdc uppe root forceps f x 51 s, gdc uppe root forceps sfx149:11, micro health suture cutting scissors, tissue forces serrated straight, tissue forces serrated curved, austin cheek retractors half moon, austin cheek retractors fork, excavators, condensers (round), ball burnisher, plastic filling instrument, glass slab, dappen dish, s.s trays 12 x 8, s.s trays 10 x 8, s.s trays 8 x 6, s.s trays 8 x3, kidney trays large, kidney trays medium, kidney trays small, cheatle forceps, pulse oxymeter, digital weighting machine, dental radiology unit&acrylic lab, portable dental xray machine, rvg sensors, rvg sensors sleeves, laptop, acrylic lab, wax carver, wax spatula, wax knife, plaster spatula, hot plate, chip blower, dental lab micromotor, mackintosh sheet, stone burs black;medium, stone burs black;small, stone burs pink medium, stone burs pink small, stone burs white;medium, stone burs white small, impression trays full set, edentuloos trays, perforated trays full set, plaster of paris (kg), stone plaster ( kg), alginate ( kg), cold cure acrylic sets, dental ceramic unit, dental chair with accessories(electrical operated,zero programme, glass spittonwith auto drainage section, 2 intensitylamp scalar), air compressor, light cure unit, dental flask with clamp set, rubber bowl :big, rubber bowl :small, mixing spatula:straight, mixing spatula:curved, shofu all ceramic preparation kit, magma nt nano ceramic universal restorative material, saddle contured metal matrices, ivoclar cention powder, ivoclar cention liquid, ivoclar vivadent te econom plus cmposite kit, vita classical shade guide, autoclavable palstic impression trays set, prevest den pro ora temp crown and bridge material, crown and bridge preparation bur set, densply sdr plus flowable bulk filling material, dental consumables, 3 m espe filtek composite resin:shade a1, 3 m espe filtek composite resin:shade a2, 3 m espe filtek composite resin:shade a3,, 3 m espe filtek composite resin:shade b1, 3 m espe filtek composite resin:shade b2, 3 m espe filtek composite resin:shade b3, flowable composite kit, posterior composite(3m espe p-60 micro hybrid), etchant, bounting agent, composite polishing strips set, gic:ketac molar, gic:crysta, gic:fuji 9, orafil-g, pain off, formacresol, metapex, rc-cal set, endo prep rc, protaper gold rotary files sx, protaper gold rotary s1, protaper gold rotary files s2, protaper gold rotary files f1, protaper gold rotary files f2, protaper gold rotary files f3, pulp-x, dycal, alvocure, hero shaper rotary files set, protaper hand files sx, protaper hand files s1, protaper hand files s2, protaper hand files f1, protaper hand files f2, protaper hand fi

State Government

CTN :40149413

18 Jun, 2025 8.68 Lacs

Mahisagar - Gujarat

Tender For corrigendum : supply of flame proof led, various spray, various consumable & electrical items at khep - multi functional fluid spray oks-601, multifunctional fluid spray oks -451, carbon cleaner spray, rust remover wd 40, 400 ml / bottle, complete flame proof led light fixure with glass having light equivelent to 125 w hpmv conventional fitting, megger for insulation testing having capacity5 kv along with p.i. facility, voltage input range: 85-265 v, 50/60hz,current measurement range: (+ & -) 0.01 na to (+ & -)5 ma, test regimes: auto ir, pi, dar, sv and dd., pedestal fan, size 450mm (18-inch) ,rpm-1440,1-phase,3-speed, 230 volt,100 watt with regulator., wolf make air blower, rccb,240v ac, 32/40 amp, 2 pole, sens:30ma ,mounting- din rail, switch socket combined 6 & 16 amp.anchor make, electical saftey equipment tester taparia product no:814 voltage range:110v to 230v, taparia tester 818, fuse puller, bearing puller , 12 inch , 3 legs, bearing puller , 8 inch , 3 legs, grease gun, emery cloth roll coarse size 50 mm x 50 meter x 400 grit, emery paper smooth fine size 38 mm x 50 m length

Central Government/Public Sector

CTN :40576512

26 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For blower motor unit for electrical chimney to operate in 230 volt, 50 hz, ac supply, suitable for eog lhb pantry car conforming to icf specification no. icf / elec / 898 cs. 2. make acceptable : sem mod el no. 12ec1bf (black color), rotech, sothern magnetics, eyyani. oem or authorized dealer only to qu ote with documentary evidence. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40558773

11 Jun, 2025 NA

Mumbai - Maharashtra

Tender For supply of dual speed radiator blower motor with impeller and fitting of power drives for 1300 kva emu transformer fitted in m/s. me dha rake as per m/s. high volt electrical pvt ltd. part no. 1300050020. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40540335

14 Jun, 2025 NA

Baramulla - Jammu And Kashmir

Tender For purchase of spares of ingersoll rand make hp and lp compressors - air filter ingersol rand make air compressor model no 15t2 part no 32012957 , tune up kit set piston ring 1.625 hp part no 37138146 , ring piston set hp 3 inch part no 32194276 , piston ring set 5.5 inch part no 32194144 , air head hp 1.625 inch part no 37130655 , air head top 3 inch part no 37130341 , air head bottom part no 37130366 , head air top 5.5 inch 71t2csc part no 37130572 , head bottom half air assy part no 37130549 , dowel part no 37114030 , cylinder air 1.5-8 part no 37128675 , washer copper 1-2 inch part no 95674701 , elbow tube 5-16 x 1-4 part no 95110441 , connector 5-16 x 1-4 part no 95082491 , tee tube 5-16 x 1-8 part no 95007522 , 1.5-8 valve assy part no 31517725 , valve assy hp 37004827 for 15t electrical compressor , 5.1-2 valve assy part no. 37101946 , valve safety 1-4 x 60 part no 97048094 , valve assy 1-4 x 300 part no 72062102 , valve safety 1-2 x 1200 part no 97048052 , t30 distinct oil part no 70245808 , gasket set 15t2 part no 30423339 , tube elbow 1-2 x 3-8 npt part no 95040184 , ultra coolant 20 ltr part no 38459582 , air filter indicator part no 22097208 , gas spring part no 54749114 , orifice part no 54775556im , hinge for lp compressor part no 22091193 , oil filter for lp compressor model up5-18-7 part no 54672654 , nipple part no 22354989 , seperator element part no 54749247 , o ring part no 22199806 , o ring part no 22354971 , elbow banjo part no 89209217 , air oil pressure tank safety valvemodel 06-cc61ss2 3-4 m x 1 f valve size 06 , tube nylon 3-4 inch part no 39124821 for lp compressor up5-18-7 , tube nylon 1 inch part no 39124812im , tee male run part no 22055909im , elbow part no 39155478 , connector part no 39156443 , connector part no 39156393 , elbow part no 39155650 , elbow part no 39155577 , valve solenoid 3sv part no 54654652 , mpcv minimum pressure valve part no 22064695 , centrifugal blower part no 99295362 , elbow tube 5-6 x 1-8 part no 95031860 , plug pipe solid square head 1-4 part no 95033593 , freight charges

corporations/Associations/Others

CTN :40522320

13 Jun, 2025 NA

Washim - Maharashtra

Tender For supply of alluminium extenssion ladder , selectable flow nozzle 63mm size , pyro protect rrl delivery hose type b 63mm coupling 15m , breathing air compressor , fire man axe , bolt cutter extra large , corw bar , pick axe wooden handles , rope terelean nylon 30m each , drag hook heavy duty , circular saw metal cutter machine electrical base , chain saw wooden cutter machine petrol base , diamond chain saw concrete cutter machine petrol base , uniform set for fire fighter as per your latter , officer uniform set as per your latter , rain coat best quality , 100 feet long 16mm dia bob rope , fire extinguishers abc 4kg , fire extinguishers co2 4.5 kg , spread with wooden handle , first aid box for 6 person , hydraulic combi tools , hydraulic power pack , hydraulic hand pump , hydraulic jack , blower and exauster , life bouy jacket , life bouy ring with 30m rope , kernmantle rescue rope 30m size 50mm circumference , electric gloves 10000 volt pairs , ba set with spare 04 cylinder with fire engulfment test , afff 6 percent concentration 20 kg jerrycan , mattock with handle , refilling of co2 type fire extinguishers 4.5 kg , refilling of abc type fire extinguisher 4kg , refilling of abc type fire extinguisher 6kg , refilling of breathing apparatus cylinder , refilling of aksa cylinder 300 bar bid number/ & ( * ) : gem/2025/b/6276915 dated/ + : 29-05-2025 bid document/ 2 2 1 / 30

Central Government/Public Sector

CTN :40491295

07 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of soot blower electrical items - 961330010000-ring terminal 2.5-m4 tci-129 , 961381350000-cable marker 2.5 sqmm - 1 , 961381360000-cable marker 2.5 sqmm - 2 , 961384670000-cable marker 5 dia.1.5 sq mm-od3.55 , 961384690000-cable marker-2.5 sq mm- r , 961384700000-cable marker-2.5 sq mm- y , 961385090000-cablemarker-b , 963531230000-pin terminal-d2.5-tci-129 , 963531520000-terminal block - 10 way , 963533470000-push button green , 963539430000-push button green- lr , 963539440000- push button red- lr

Electric Hand Blower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors