Latest electric heating Tenders | Government electric heating Tenders

Central Government/Public Sector

CTN :45688982

24 Jul, 2026 NA

Ropar - Punjab

Tender For supply of spare for bhel boilers drg. no. 00-b-007-197 , replacement of platen super heater panels , spare for bhel boilers drg. no. 00-b-007-160 , replacement of final super heater panels -to manufacture, testing, supply of platen super heaterpanels as per drg.no.00-b-007-197 and 10-b-007-258/b.tube size: o.d. 54.0 dia x thickness 5.0, 5.6, 6.0 & 8.0 mmmaterial of construction: sa-213 t11 & sa-213 t22

Central Government/Public Sector

CTN :45667216

14 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For procurement of heating element and sensor for electrical heating furnace for sru-ifico.

corporations/Associations/Others

CTN :45666729

08 Jul, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

CTN :45647293

30 Jun, 2026 11.00 Lacs

Sonipat - Haryana

Tender For purchase of instrument spares. - purchase of instrument spares., control valve 4 (4440) (pnuecon valves make) only diaphagram for boiler super heater control vbalve. sr. no- 210970776, model 810/pdo 055t, size- 3 characterstic-linear travel-38mm, supply failure-close, guage vaccum-760 (1968) (micro/forbes marshell make) dial-6 bottom connection, bsp thread, s.s 316 bourdon tube., jumbo ceiling rose (6240) (electromed make) jumbo display flow monitor, input 4 to 20ma, power supply 230 vac with tps-24 vdc raqnge 0 to 9999. having previous, current and flow rate, pressure gauge assorted size (4665) (forbes marshall/micro make) range 0 to 10 kg/cm2, dial size-6 bottom connection , bsp thread, s.s casing and ss-316 bourdon tube, rpm indicator for pt (6618) (beacon make) range 0-10000, cut size- (92*92)mm, power supply-230vac, signal input-24 d.c. output-4 to 20ma, air filter regultor (5000) (festo/jenetics make) fitting size-1/4 range (0 ti 10kg/cm2) with gauge, air filter regulator (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., air filter regultor (5000) (festo/jenetics make) air filter regulator & lubricator fitting size-3/8 , range (0 to 10kg/cm2) with gauge and lubricator., p u connecter lock bolt (2051) (jenetics/festo make), p.v. tube 8mm (4974) (jenetics/festo make) pu tube-size 8mm, rubber sheet for pan disc charge valve (2876) (puri make) size of sheet- 654*490*25, seal kit complete set for 12 pan (5746) (puri make) for kit for 12 discharge valve, c.s. steam valve (4504) (leader/sant/wj make) for steam/impulse lines class-300, conector (2032) (jenetics/airmax/festo make) for pu tube -8mm and bsp thread, discoratry valve (2031) (airmax make) connection size-1/4 , draught gauge (vacuum) dial size-6 (circular type) range- 1000/0 mmwc, fitting size-1/2 (m) bsp bottom side make- baumer/micro (3389) (forbes marshall/baumer/micro make) draught gauge-dial size-6 range(0-1000 mmwc), s.s body and bourdon tube ss-316, bottom connection b.s.p, guage indecator temprature 0-100 (3485) (forbes marshall make) temperature gauge-dial-6: range (0-1500 c), s.s body and bourdon tube ss-316, bottom connection bsp stem length-300mm, guage pressure 0-40 kgs/600 lbs (1965) (forbes marshall/genernal make)dial size-6 , s.s. body and bourdon tube ss-316, bottom conection bsp, guage pressure 0-40 kgs/600 lbs (forbes marshall/genernal make) dial size-10 ss body and bourdon tube ss-316 bottom connection bsp, kit 3 (1798) ( puri make) model-complete set of pneumatic cylinder of discharge valve, kit 8 (1797) (puri make) model-complete set of pneumatic cylinder of discharge valve, level flow transmiter (5385) (honey well make) range-0 to 10000 mmwc, make-honey well, supply-24 vdc, signal input-4-20 ma connection-1/4 bsp, ms seamless pipe (3608) (leader/sant/wj make) for steam/impulse line (class-300) of transmitter, pu connector 6 mm (367) (jenetics/festo make) one side tube connection-8mm, other side thread connection of bsp, pid controller, 72*72 mm, i/p-rtd, o/p-two relay (no-nc) (5010) (honey well make) input/output-universal, cutsize-92*92, make-honey well, model-dc-1040, supply-220 ac, plc card inpur/output for boiler (3867) (allen bradley make) model-1762-if2/of2, plc card input/output for boiler (3867) (allen bradely make) model-1762-if4/of4, plc controller (6180)(allen bradely make) model-micrologix-830, make allen bradely, with modules, pneumatic positioner for control valve (4823) ( aira/ytc/rotex make) type:- rotary, model: e/p-1000r, i/p signal:- 4-20 ma, air supply:- 0-7 kg/ sqcm, standard stroke-10-80mm, air connection:- , pneumatic positioner for control valve (4823) (ytc/aira?rotex make) type:- linear, model:- e/p-1000l, i/p signal:- 4-20 ma, air supply:- 0-7 kg/sqcm, standard stroke-10-80mm, air connection:- , positiner relay (5933) pilot valve realy for aira positioned, pressure gauge 2 kg (4772) (forbes marshall/genernal make) dial size-6 , ss b

Central Government And Public Sector

CTN :45576342

07 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : supply of set of high pressure electric heating hot & cold water jet cleaning machine. detailed specification as per annexure-a attached. each set consisting of : (i)high pressure electric heating hot & cold water jet cleaning machine. qty-02nos. (ii) heavy duty high pressure cold water jet cleaning machine. qty-01no.]

CTN :45586875

02 Jul, 2026 9.00 Lacs

Sultanpur - Uttar Pradesh

Tender For tender for labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia dismantaling , labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia fabrication , labour charge for boiler roof front tubes screen tubes of 76 point 2 mm dia fitting of tubes , labour charge for boiler drum to drum tubes of 63 point 5 mm od dismantaling , labour charge for boiler drum to drum tubes of 63 point 5 mm od fabrication , labour charge for boiler drum to drum tubes of 63 point 5 mm od fitting of tube , labour charge for side wall tube size 76 point 2 mm dismentalling , labour charge for side wall tube size 76 point 2 mm fabrication , labour charge for side wall tube size 76 point 2 mm fitting of tube , super heater coil od 44 point 55mm dismentaling , super heater coil od 44 point 55mm fabrication , super heater coil od 44 point 55mm fitness of tube

CTN :45525406

22 Jun, 2026 NA

Pondicherry - Pondicherry

Tender For main work : construction of canteen building for the puducherry technological university inside the ptu campus under rusa fund. sub work : providing and fixing of kitchen chimney, gas pipeline connection and kitchen equipment for the canteen building inside the ptu campus under rusa fund (iii call) - ss dosa plate:supply and fabrication of 4 ft 2.5 ft commercial dosa plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves,complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use. , ss chapati plate:supply and fabrication of 4 ft 2.5 ft commercial chapati plate, constructed with ss 304 grade outer body (1.2 mm thick) and heavy-duty ms/cast iron plate (12 mm thick), equipped with 3 4 high-pressure lpg burners with individual control valves, complete with oil drain system, splash guard, sturdy ss frame with adjustable legs, and matt finish, suitable for continuous commercial kitchen use., chimney with ducting & blower:supply, fabrication, and installation of 10 feet long commercial kitchen chimney (exhaust hood) made of ss 304 grade (1.0 1.2 mm thickness), rectangular type with ss baffle filters and oil collection tray, connected with 150 sq.ft gi ducting (0.6 0.8 mm thickness), complete with 2 hp heavy-duty centrifugal exhaust blower (3-phase, 1440 rpm), mounted on ms angle support structure, including all necessary fittings, clamps, bends, hangers, and electrical connections, suitable for continuous commercial kitchen operation, bain marie (7 compartment):supply and installation of 7-compartment commercial bain marie unit, fabricated in ss 304 grade (1.0 1.2 mm thickness), complete with 7 nos. gn pans with lids, fitted with 3 kw electric heating element (230v, single phase), thermostatcontrolled water bath heating system, and sturdy ss/ms support structure with adjustable legs, including water tank and drain arrangement, suitable for continuous commercial kitchen and buffet operations., working table with 1 under shelf:supply and fabrication of 4 ft 2 ft working table (vegetable cutter table) made of ss 304 grade (1.0 1.2 mm thickness), complete with one under shelf (u/s), heavy-duty ss square pipe frame, reinforced top with machine mounting provision, and adjustable legs, suitable for vegetable cutting and food preparation in commercial kitchens, gas rice steamer (20 kg):supply and installation of 20 kg capacity gas rice steamer, fabricated in ss 304 grade (1.0 1.2 mm thickness), double-wall insulated type, complete with heavy-duty perforated rice vessel, high-efficiency lpg gas burner, pressure control system, steam outlet, and sturdy ms/ss stand, suitable for continuous commercial kitchen operation., ss rack (4 tier): supply and fabrication of 4-tier stainless steel rack of size 35" 14" 48", made of ss 304 grade (1.0 1.2 mm thickness), complete with four shelves, heavy-duty ss square pipe frame, adjustable legs, and smooth polished finish, suitable for storage of utensils, provisions, and kitchen materials in commercial kitchens., copper gas pipeline:supply, installation, testing, and commissioning of copper gas pipeline system suitable for commercial kitchen, using 3/4 inch main line and 1/2 inch branch lines, complete with all necessary fittings, isolation valves for each equipment, pressure regulator, nrv, and flexible hose connections, properly supported and leak-tested, suitable for lpg gas supply to dosa plate, chapatti plate, rice steamer and gas stove units.

CTN :45512255

22 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For non skid chain , electric heating element , table top elevator , wpn tech spec chart , document storage chart

corporations/Associations/Others

CTN :45237118

15 Jun, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

Central Government/Public Sector

CTN :45469380

18 Jun, 2026 NA

Barh - Bihar

Tender For providing of custom bid for services - overhauling of bhel make tdbfp drive turbine (model no-nk 63/71-3) along with supply of electrical heating equipment and machining work for unit-4 at ntpc barh (2x660mw)

Electric Heating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector