Latest electric line Tenders | Government electric line Tenders

CTN :42996009

09 Dec, 2025 22.00 Lacs

Deeg - Rajasthan

Tender For maintenance and on/off work of all street lights, electrical lines, timers, ccms

CTN :42989136

29 Dec, 2025 16.86 Crore

Agartala - Tripura

Tender For construction of road, r.c.cdrain, shifting and laying of dwsline and conversion of overheadto underground lt electrical linealong with street lighting underuidf phase-2 including defectsliability period of 18 (eighteen)months.

Central Government/Public Sector

CTN :42688807

09 Dec, 2025 NA

Nasirabad - Rajasthan

Tender For corrigendum : special repair / replacement of lt distribution system in sata unit area and special repair / replacement of lt oh electric line to ug cable in arty bde area at nasirabad military station under ge nasirabad

State Government

CTN :42965839

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - cotton tape 1", webbing cotton tape 1 ", bakelite tube 3/8 x 1/2", bakelite tube 3/4 x 5/8", empire slaving 3mm, empire slaving 4mm, empire slaving 6mm, empire slaving 8 mm, paper tape 20mm, paper tape 25mm, press board 1mm, press board 2mm, press board 3mm, craft paper 4 mil, craft paper 10 mil, craft paper 2.5 mil, presphan paper 14 mil, crap paper tape 25 mm, lt brass stud 3/4", lt brass stud 1/2", ht brass stud 1/2", ht brass stud 5/8 x 18", ht aluminum stud 5/8 x 18", lt bushing 630 amp, lt bushing 250 amp., ht bushing 1: s 1180, ht bushing 1: s 3347, rubberized cork strip (50x5) 200kva, rubberized cork strip (40x5)100x63kva, rubberized cork washer (109x78x5), rubberized cork washer (89x45x5), rubberized cork washer (89x58x5), rubberized cork washer (70x45x5), rubberized cork washer (70x45x2), rubberized cork washer (50x28x5), rubberized cork washer (45x25x5), rubberized cork washer (32x14x5), rubberized cork washer (32x14x2), lt cone washer 3/4", lt cone washer 1/2", ht cone washer 1/2", silacagel breather 200kva, silacagel breather 100 kva, silacagel breather 63 kva, btc strip, al. clamping member, neutral clamp, ht bushing clamp 6 hole, ht bushing clamp 4 hole, ms nut & bolt diff. size (4/3/6/8), ms washer 3/8, ms washer 1/2, ms washer 5/8, d. a. gray paint, white paint, red oxide paint, thinner, m.seal, fevicol, cotton waste, markin cloth, r. cork sheet3x2x6mm, emery paper, in line connector diff. size, ms plug diff.size, ci cap diff. size, h.t packing piece (nylon washer), l.t packing piece (nylon washer)

State Government

CTN :42985186

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 11 kv 3-core heat shrinkable outdoor cable jointing/termination kit 240 mm2, 11 kv 3-core heat shrinkable outdoor cable jointing/termination kit 300 mm2, 11 kv 3-core heat shrinkable outdoor cable jointing/termination kit 95-50 mm2, 11 kv 3-core heat shrinkable straight through cable jointing kit 300 mm2, 11 kv 3-core heat shrinkable straight through cable jointing kit 95-150 mm2, 33 kv 3-core heat shrinkable out door type cable termination kit for 400mm2, 33 kv 3-core xlpe ug cable heat shrinkable straight through jointing kit suitable for 400 mm2, 11 kv lightening arrester (9 kv, 10 ka class ii, station type)(1set=3nos), lightening arrestor (9kv 5ka) line type, three no s 12 v, 150 ah each battery along with compatible battery charging unit with stand., polycarbonate seal bit with sealing wire

State Government

CTN :42985190

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - 33 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 33 kv b&s type disc insulator (polymer type) 90 kn with h/w fitting, 33 kv polymer pin insulators 10 kn with gi pin and nut & washer, 33 kv post insulator 10 kn (polymer), 11 kv b&s type disc insulator (polymer type) 70 kn with h/w fitting, 11 kv pin insulator 10 kn, od 40 mm dia with pin (polymer type) and nut & washer, 11 kv hg fuse unit (polymer type), 33 kv hg fuse unit (polymer type), gi wire no. 6/8/10, gi stay set complete for d/s/s (1900x 20mm) with stay wire 7/10 swg and guy insulator, stay set complete (1800x20mm) with stay wire 7/10 swg & guy insulator (galv), 11 kv stay set complete (1800x16 mm) with stay wire 7/10 swg and guy insulator, ace chemrod ( artificial concept of earthing by chemical rod ) :- ace chemrod earthing electrode (consisting mild steel galvanized pipe of size 2500 mm in length x 48 mm outer dia. x 2 mm thick, ms rod of size 2575 mm x 16 mm be welded with bottom.

State Government

CTN :42985191

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For electric line materials under o&m head for f.y. 2025-26 - male female contact of 33 kv ab switch 600-630 a, male female contact of 11 kv ab switch 600 amp, male female contact of 11 kv ab switch 400 amp, connector pipe to panther, connector panther to panther, connector panther to ab switch, connector pipe to ab switch, connector dog to ab switch, led flood outdoor light with ip 66 protection rectangular (100w), suitable lugs, suspension clamp assembly suitable up to 70-95 mm2 bare messengers(including 1 no.suspension clamp with bracket 2 mtr. stainless steel strap &2nos.ss buckles), dead end clamp suitable above 70 s mm2 bare messengers (including 1 no. dead end bracket + 1 no. dead end + 2 mtr ss strap + 2 nos. ss buckle) (minimum breaking load-15 kn), lt ab cable accessory, 1.1 mtr. stainless steel strap if207(20x0.7), buckle for strap, insulation piercing connector for db charging, insulation piercing connector branching suitable for t joints, spring loaded distribution bus bar insulated box for fixing on pole suitable for ab xlpe cable and three phase connection 1 incoming and outgoing 3 phase connection as per field requirement, lt phase separator, service main anchor clamp for proper support of service cable (4 mm2 and 10 mm2), lt pre insulated mid span joint suitable 50 mm2 phases, lt pre insulated mid span joint suitable 95 mm2 phases, suspension clamp suitable for 95 mm2 bare messenger (including 1 no. suspension clamp with bracket 2 mtr stainless steel strap & 2 nos. ss buckle), p.g clamp for 200/150 mm2 conductor, p.g clamp for 80/100 mm2, aluminum pipe 40mm dia, rubber mat along length of panel, earthing g.i strip (65x6) mm2, aluminum winding wire/tape/strips etc.

State Government

CTN :42985192

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For supply of electric line materials under o&m head for f.y. 2025-26 - d p channel support clamp (50x6 mm) for 8 mtr 200kg psc pole[nongalvanized] (1.1kgs.each), anticlimbing device (barbed wire) 2x12 swg, gi service pipe 40 mm diameter 3 mtr. length, galvanized nuts & bolts (assorted size), angle/side stay clamp (50x6mm) for 8 mtr 200 kg psc pole [galvanized] (1.08 kg), hot dip galvanized fabricated iron material for 33 kv line, lt line & dss, gi base plate for 33 kv (500x500x10 mm) avg weight 19.6 kg/plate

State Government

CTN :42985193

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For supply of electric line materials under o&m head for f.y. 2025-26 - 25mm dia ms rod 3 m long for earth mat, 400 watt/250 v hpsv lamp fitting complete for 33/11 kv pss yard lightening, adhesive insulation tape, aluminum binding wire, aluminum pipe 40 mm dia, aluminum pipe connector, earthing g.i.strip (65x6)mm2, eye hook, dead end clamp 50-70 sq mm bare messenger, lt pre insulated mid span joint suitable 120 mm2 phases, lt pre insulated mid span joint suitable 70 mm2 phases, lt pre insulated mid span joint suitable 95 mm2 phases, p g clamp for 80/100mm2, p g clamps for 34/55mm2, pole clamp for i hook b type (0.8 kgs. each), service main anchor clamp for proper support of service cable, spike earthing made of 20mm gi solid rod, spring loaded cp multi conn bus-bar in insulated box single phase 1 in 9 out (dist. box for fixing on pole suitable for ab xlpe cable), stainless steel strip of 20mmx1mmx1000mm with buckle clip, jumpering wire (100 sq mm acsr conductor), jumpering wire (150 sq mm acsr conductor), hdpe pipe - 160 mm /6 pe 63 grade

State Government

CTN :42985194

19 Dec, 2025 NA

Dhanbad - Jharkhand

Tender For tender for electric line materials under o&m head for f.y. 2025-26 - hot dip galvanized fabricated iron materials (list enclosed), gi base plate for 33kv (500x500x10 mm) avg weight 19.6kg/plate, gi pipe 6" medium duty (b class), m s nuts & bolts (12", 8", 6", 4" full thread)

Electric Line Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors