Web Analytics Made Easy - StatCounter

Electric Motor Scrap Tenders

Get complete information related to latest Electric Motor Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electric Motor Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electric Motor Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :45270268 Due date: 22 Jun, 202622 Jun, 2026 26.55 Lacs
Tender For corrigendum : manufacture, supply, erection, testing and commissioning of automatic self-cleaning type duplex filter with gear box, motor and brush cleaning, differential pressure switch and auto drain arrangements and with control panel at 3x18 mw sholayar pow

State Government

CTN :45541830 Due date: 26 Jun, 202626 Jun, 2026 NA
Tender For design, supply, installation, testing and commissioning of hybrid run (grid - solar) single stage/ multi stage split case/centrifugal pump coupled with squirrel cage induction motor with hybrid motor starter, spv panels and rising main and its allied

CTN :45096857 Due date: 18 Jun, 202618 Jun, 2026 9.86 Lacs
Tender For corrigendum : supply, installation, testing and commissioning of 100 hp vertical hollow shaft 3 phase, 980 rpm induction motor for 20 cusec vt pump and allied works at li/dws takanwari old.

CTN :45520010 Due date: 29 Jun, 202629 Jun, 2026 37.98 Lacs
Tender For supply, installation, testing & commissioning of 700 kw, 989 rpm, 6.6 kv ht 3-phase induction motor compatible to existing base frame of wilo make hscf pump installation with suitable coupling & other required accessories including insurance, transportation, loading, unloading, inspection charges etc. complete for nc-6, khirai pumping station, tal-maliya, dist-morbi

CTN :45318628 Due date: 18 Jun, 202618 Jun, 2026 10.17 Lacs
Tender For corrigendum : supply of hood dryer , d.c. shunt generator with 3phase squirrel cage induction motor , ac squirrel cage motor , solar street light , solar traffic light , d.c. shunt motor , shaded pole motor , dmx controller , battery charger , meter reading instrument , magnetic particle testing kit , plastic welding machine with hot air gun

State Government

CTN :45521250 Due date: 29 Jun, 202629 Jun, 2026 42.81 Lacs
Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

State Government

CTN :45533296 Due date: 18 Jun, 202618 Jun, 2026 1.69 Lacs
Tender For supplying erection testing and commissioning of submersible motor 35 bhp and submersible cable 16 sqmm at twell no. m 5 in sector 7 panchkula

State Government

CTN :45534952 Due date: 24 Jun, 202624 Jun, 2026 NA
Tender For design, supply, installation, testing and commissioning of hybrid run (grid- solar) multi stage split case/centrifugal pump coupled to 3-phase squirrel cage induction motor along with hybrid controller, spv panels and raising main and its allied acc

Central Government And Public Sector

CTN :45279869 Due date: 18 Jun, 202618 Jun, 2026 2.90 Lacs
Tender For corrigendum : supply of service 11 kv ht panel as per sepcifications , sf new mineral oil for panel etc as per sepcifications , calibration relay etc as per sepcifications , replacement digital ammeter for ht panel , replacement digital voltmeter for ht panel , replacment ryb ind lamp led type in ht panel , sf 2a hrc fuselink in ht panel , servicing 1500kva dry type transformer as per sepcifications , servicing 2 runs 2500a tpn bustrunking as per sepcifications , service mv lt panel with 2500a 4p acb 3 nos as per specifications , service mvlt panel with mccb incoming as per specifications , checking and repair of em intelocking , dismentaling 3.5 sq mm 240 or 300 sq mm al cable as required , pf adaptor box aprx 1.5 ft x 1.5 ft x 1.5ft of 16swg ms sheet as reqd , pvdg panel module door key as reqd , pvd and fixing operating handle for 250a 4p changeover as reqd , replacement 160a hrc fuse with base in extg cap panel , replacement 3p 50kvar cap duty contactor in extg cap panel , replacement 25sq mm cu lead wire 1ft length in extg cap panel , checking etxg 2no 25kvar cap bank and fault repair reinstallation , dismentaling uv protection connections as reqd , replacement digital ammeter for lt panel , replacement digital voltmeter for lt panel , replacment selector switch in lt panel , replacment ryb ind lamp led type in lt panel , sf 2a hrc fuselink in lt panel , sf 32a hrc fuseling incl removing faulty item from lt panel as reqd , sf 63a hrc fuseling incl removing faulty item from lt panel as reqd , sf 100a or125a hrc fuseling incl removing faulty item from lt panel as reqd , sf 250a hrc fuseling incl removing faulty item from lt panel as reqd , sf new 5 or 6 amp piano switch in replacement of faulty item , sf new 5 or 6 amp 3pin socket outlet in replacement of faulty item , sf new 15 or 16 amp piano switch in replacement of faulty item , sf new 15 or 16 amp 6pin socket outlet in replacement of faulty item , rewinding ceiling fan motor , sf 4ft 20w led fitting against faulty fitting , service of 750kva dg set as per specification , service dgset control panel 1250a 4p acb as per specification , repacement ryb ind lamp in dg set panel , repacement digital ammeter in dg set panel , earthing testing in existing earth pits and report submission

State Government

CTN :45511812 Due date: 18 Jun, 202618 Jun, 2026 30.70 Lacs
Tender For design, manufacture, supply, erection, commissioning and testing of swift make 12.5 tonne capacity underslung eot crane, cross travel geared trolley with lifting arrangement with extended type of motor driven trolley with overhanging arrangement at unit-8 mill bay.
 Loading, Please wait...

Connect us via What's Up