Latest electric substation Tenders | Government electric substation Tenders

Central Government/Public Sector

CTN :40078006

12 May, 2025 NA

Silvassa - Gujarat

Tender For supply of public address system - network audio paging station , network pa paging controller , network audio amplifier 500 watt , 25w horn speaker , 2 core 1.5sqmm spekaer cable with double jacket , 2 core 1.5sqmm armoured spekaer cable , 6 core sm ofc armoured cable , hdpe pipe 32mm black with isi , hdpe pipe 25mm black with isi , 18u outdoor rack with earthing , 12 port lc dinrail mount liu , 4 copper, 2 sfp port dinrail mount , l3 switch 16sfp port , sfp module , ofc patch cord , ofc pigtail , hose clamp , cat-6 patch cord , splicing job , cable and hdpe pipe laying , 2kva online ups , ups batterybank , 2kva stabliser , installation , civil work , electrical connection

State Government

CTN :40087447

30 Apr, 2025 4.70 Lacs

Samba - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 100kva electric substation along with ht/lt network for providing power supply to 01 no tubewell cum pumping station at prarka (purmandal) under nabard.

State Government

CTN :40044238

01 May, 2025 NA

Kashipur - Uttarakhand

Tender For work of yard structure work with earthing, turfing, cable trunch and height increase of yard structure fencing and supply of its associated decentralized material to 33/11 kv sub station pipliya in edsd doraha under edd bazpur.

CTN :40054642

02 May, 2025 49.74 Lacs

Dhanbad - Jharkhand

Tender For renovation work with special repairing at 11kv/3.3kv outdoor electrical substation at 12 mgd and 9mgd 3.3kv substation at river side outdoor electrical substation at jamadoba, under jmada dhanbad for the year 2024-2025.

CTN :40072804

28 Apr, 2025 1.80 Lacs

Kheri - Uttar Pradesh

Tender For in order to protect the power transformer working at the sampurna nagar electricity substation under the electricity distribution division palia from damage, the said power transformer shall be removed and the healthy power transformer removed during capacity enhancement at the substations under the electricity distribution division gola shall be brought from the said substation to the said substation and installed at the sampurna nagar substation and energized.

CTN :40082116

05 May, 2025 NA

Doda - Jammu And Kashmir

Tender For supply of spares/ stores/t&p/equipments/hardware items required from time to time for day to day operation/ maintenance/construction of power sub-transmission network of this division during the financial year 2025-26 or till the next rate contract - disc insulator 70kn b&s type, anti fog (reputed make/ already use in pdd), 33kv single tension disc fittings [3 bolts] suitable for dog conductor suitable for b&s 70kn disc insulators, 33kv pin insulators (porcelain) 70kn, 33kv g.i. pins (heavy duty), 11kv, 3 core cable kits [heat & shrinkable], a. indoor type, i) 600 mm. sq.single core, i. 400 mm sq., ii. 300 mm sq., iii. 240 mm sq, iv. 185 mm sq, b. outdoor type, i) 600 mm. sq.single core, i. 400 mm sq, ii. 300 mm sq, iii. 240 mm sq, iv. 185 mm sq, 11kv link set [heavy duty] 50*6 mm ( clamping suitable for dog conductor), 11kv l.a [station type]reputed make, 11kv l.a [line type] reputed make, guy wire 7/3.15mm, 33kv guy insulators, manila rope, i) 3/4 inch dia, ii) 1 inch dia, p.p.rope 3/4 dia, m.s. nut & bolts of sizes, i. 3" (full thread), ii. 6" (half thread), iii. 9" (half thread), iv. 10" (half thread), nuts and bolts brass, cork sheet 8mm, aluminum thimbles of sizes, i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, drill bit [heavy duty], i. 16mm dia, ii. 19mm dia, iii.26mm dia, p.g clamps, i) suitable for panther conductor, ii) suitable for dog conductor, p.i clamps [suitable for dog conductor/panther], t clamps [suitable for dog conductor,panther ], brass bush rods of 33/11kv power transformer of sizes, i. hv [m20], ii. lv [m20], 33kv porcelain bushes of 33/11kv power transformer of sizes, i. hv side, ii. lv side, 3 core 11kv xlpe cable, i) 600 mm. sq., i. 400mm sq, ii. 300mm sq, iii. 240mm sq, iv. 185mm sq, v. 120mm sq, copper strip 20x3mm, vacuum interrupter suitable for, i. 11kv (yamuna] breaker, ii. 11kv [pascal] breaker, iii. 11kv (stelmec] breaker, iv. 11kv [schneider] breaker, iv. 11kv [electrifield make]breaker, aluminum bus bar 75x10mm, duck back shoes of different sizes, red oxide enamel paint (asian, nerolac/ berger), al. paint (asian, nerolac/ berger), 1.1kv voltage grade 2.5mm2 copper conductor, pvc insulated control cable conforming to is: 1554-1998, i. 2 core, ii. 4 core, iii. 5 core, iv) 8 core, iv. 10 core, v) 12core, 33kv current transformer of ratio, i. 750/375/5-5-5a, ii. 600/300/5-5-5a, iii. 400/200/5-5-5a, 33kv lightning arrestor [station type] reputed make, 33kv isolators with earthing blade, insulating hand gloves make crystal etc tested for 33kv level, aluminum ladder 9mtr long (folding), bamboo ladder 20 ft long, rubber mat 1mtr x2mtr, 12mm thick, 11kv operating rods, galvanised nuts and bolts of sorts, g.i wire 8 swg, lifting pulling machine 3 ton (make power ,wolf or any standard make), g.i earthing plates 2x2x6mm, pliers (taparia or any standard make), safety vest, safety belt, safety helmet (isi marked), 33kv danger plates complete, multimeter ( standard company make motwane , waco, etc), digital ampere meter [0-200/400 amps.], male contact (crompton greaves & emi make panel), female contact (crompton greaves & eim make panel), tripping coil suitable for 30/36v dc along with plunger for allind, bieco, make breaker, relays digital for vcbs for allind, bieco, easun,electricfield make panel, earth fault relay for vcb/ocb crompton greaves & emi make panel, over current relay for crompton greaves & emi make panel, 11kv ct set for breakers, i) 400-200/5 - 5amp, ii) 600-300/5 - 5amp, iii) 750-375/5 - 5amp, welding electrodes swg 8no as per is: 814 of 2004, maintenance free battery banks 36v ,vrla bank comprising of 18nos of cell [2 volt.100ah cell each] with tray and trolley of hbl,exide or any other reputed make, battery cells 2 volt,100ah(wet cell ) exide make, battery cells 2 volt,100ah (dry cell) exide make, master trip relay b24,110/125 v dc, guy rod complete with turn buckle, straining screws, guy plate etc [20mm] for 33 kv lines, transf

CTN :40090961

30 Apr, 2025 5.57 Lacs

Ranchi - Jharkhand

Tender For construction of residential and non-residential building office building, basement plus ground plus 4, 14 nos. type-ii qtr. g plus 6, 13 nos. type-iii qtr. g plus 6, 5 nos. mixed type qtr. g plus 4 having 3 nos. type-iv qtr. 01 no. type-iv special qtr. and 01 no. type-v qtr. electrical substation including development work, internal roads, rcc sump, rain water harvesting, water supply line, drainage and stp, providing internal ei including street light, substation and lt distribution, dg set, lifts, fire alarm and pa system, fire fighting system, cctv and networking, conferencing system, solar photo voltaic system and vrv vrf system of regional passport office at ranchi jharkhand sh: providing day to day services in the office of the assistant engineer-iii, cpwd, hinoo ranchi

CTN :39506280

25 Apr, 2025 4.26 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : "description of work: - work of shifting the obstructing electric poles in 11 kv line in the widening of bhairampur chandrahanspur dhahiya, panchapurwa, ramaipur, kaindha road from km-12 of bidhanu kisan nagar canal track road related to 33/11 kv electricity substation chakarpur under electricity distribution section-kanpur rural under full deposit scheme item and shifting of obstructing electric poles in the widening and strengthening work from km-12 to 16 of bhaunti-kala ka purwa-damgarha-patarsa-gopalpur kaindha road (a.d.m.) located in the area related to chakarpur. (on semi turnkey basis).

Central Government/Public Sector

CTN :39823642

28 Apr, 2025 35.00 Lacs

Hisar - Haryana

Tender For corrigendum : upkeeping of electric substation and outdoor substations at hisar mil stn under ge hisar

Central Government And Public Sector

CTN :39112820

21 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

Electric Substation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector