Latest electric tower Tenders | Government electric tower Tenders

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

Central Government And Public Sector

CTN :45591734

26 Jun, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: back side of 132 kva electric tower no. 02, north-south 42 feet along 20 feet kacchi road and east-west 52 feet.

CTN :45581640

08 Jul, 2026 NA

Jaipur - Rajasthan

Tender For comprehensive maintenance contract for cummins make diesel engines (model nta-855r) and associated electric, electropneumatic systems of 02 nos. high rise diesel electric tower cars (detc-twin drive under slung type) for 02 years.

Central Government/Public Sector

CTN :45544582

22 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of blower motor along with impeller and casing of capacity 1 kw & working voltage of 110v dc as per bhel, spec. no. cee/01028 (rev-3) dt: 05.12.2018, for diesel electric tower car. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546183

23 Jun, 2026 NA

Hubli - Karnataka

Tender For supply of carbon brush of grade eg 14d split type to size 20x40x57 mm for tm2141c of cgl make utilized in 8-wheeler diesel electric tower car [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45415066

26 Jun, 2026 NA

Rupnagar - Punjab

Tender For digging of cable trench and laying of power cables for 02 nos electrical tower (t-1 & t-3) installed on different position of chp, ggsstp rupnagar nit corrigendum 1

Central Government/Public Sector

CTN :45169133

11 Jun, 2026 35.00 Lacs

Ezhimala - Kerala

Tender For corrigendum : repair replacement and day to day maint of perimeter light street light garden light pathway light bollard light post top lantern high mast light and its associated works in ambc sqn area mwtc sports complex training area and watch tower at ina ezhim

CTN :45390909

15 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of wiper blade assembly to elgi part no. eu6504000 or its equivalent as per drawing icf/std-3-5-042 for 8wheeler diesel electric tower tower. [ warranty period: 30 months after the date ofdelivery ] ]

Central Government And Public Sector

CTN :45134661

22 May, 2026 NA

Multi City - Bihar

Tender For auction sale of others - lot consisting of old ferrous foundry skull kept all over the lot area with or without embedded ferrous and refractory items and with or without other materials. note :(1) purchaser has to collect this material and put in one place under supervision of nominated supervisor after deposit of balance sale value. (2)loose ferrous items such as wheel cuts, axle end cuts, risers, rail cuts, pipes, angles, channels, rods, sheets etc. and non ferrous items are not permitted for delivery. (3) collection of the material will be done from one end only as per delivery direction. (4) oxy-cutting of big pieces of skull beyond truck body size will be permitted to accommodate the same inside the truck. (5) loading by the labour of purchaser. (6) loading shall be done by purchaser at his own cost. (7) the purchaser can inspect the material on or before auction. (8) prior delivery schedule shall be obtained by the purchaser from rwp/bela. (8) delivery on actual weighment basis (9) purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. location: near 132 kva electric tower no. 01, 48 feet from officer colony boundary wall, east-west 50 feet and north-south 43 feet.

Central Government/Public Sector

CTN :45031584

08 May, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap components of pivot, c.p. top and bottom of sorts and sizes with or w/o attachments us and ur. loc- material at open area sre side ,beside of electric tower in judw. remarks- loading by purchaser.

Electric Tower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors