Latest electric traction elevator Tenders | Government electric traction elevator Tenders

State Government

CTN :43068562

16 Dec, 2025 29.62 Lacs

Agartala - Tripura

Tender For providing installation and commissioning of 1one no of 06 passenger 408 kg machine room less mrl lift serving up to g3 level at residential quarter for grade ii judicial officer dharmanagar north tripura during the year 2025263rd call

CTN :42985418

09 Dec, 2025 25.00 Lacs

Ajmer - Rajasthan

Tender For jcb/ poclain machine and spare parts - supply of spare parts of jcb machines on rate contract - jcb 3dx spare parts (engine), cylinder liner, over haul gas kit, valve inlet exhaust, crank shaft, main bearing set, trust washer, piston, piston ring set, connecting rod, con rod bearing set, cam shaft bush, rocer arm, rocer arm shaft, gear cam shaft, water pump assy., oil pump assy., oil filter, belt, engine mount pad, exhaust elbow, engine throttle cable, engine stop cable, turbo charger assy., silencer exhaust abi, flang exhaust, element main, element secondary, auto tinsioner, idler gear, engine fan, fuel filter assy., filter kit 3dx, engine oil, engine connecting rod, fan drive puley, hyd. strainer, suction strainer, fuel injection pump, injector pipe, rubber hose, fuel filter assy., nozzle, return line, fuel pump, fuel tank cap, radiator, radiator assy., coolent, hose top, hose cac (cold side), hose cac (hot side), front wheel and axle, axle service, center pin, axle stub, hub, bearing, bearing, axle carrior l/h, axle carrior r/h, track rod, axle oil, brake fri. plate, brake cou. plate, brake seal, differential, differential gear planet, gear planet, bearing roller double, seal cassetle, bearing teper, tripling seal, stud wheel, carrior innulus, gear innulus ring, hub palentry, drive shaft, bearing roller, bearing teper roller, bearing, brake, master brake cylinder, pipe brake l/h, pipe brake r/h, brake reserver, steering, coupling, bearing, rim steering wheel, self starter, self starter, solenoid, switch altinator, altinator puley, wheel belt 1232, bearing assy., wiring and electrical, wiring harness complete, bettery cable, hour meter, head light bulb, tail light bulb, fuse and reley 15 amp, tail lamp, head light assy., ignition switch, wiper blade assy., harness roof, body, side mirror, seat, wiper motor assy., wiper blade, catch window, latch l/h, wind screen front, glass outer l/h, glass outer r/h, rear window glass, transmission, transmission over, pump assy., counter plate, firction plate, transmission filter, bearing, bearing, bearing, converier, drive plate kit, mounting, yoke coupling, lever assy. gea turret, selonoid valve assy., transmission oil, steblizer, steblizer piston, steblizer rod, inner leg steblizer, steblizer foot, pin pivot, adjuster, atb rear pad kit lower, atb rear pad kit upper, hydraulic, ind. steering suct, selonoid coil, hyd. filter assy., hyd. filter element, mrv, hyd. pump, repair kit, priority valve, priority valve, pump seal kit, pump steering, ramp bucket, hyd. oil, hose, hose-10-bsp 560mm, hose-08-bsp 1860mm, hose-10-bsp 2750mm, hose-04-10bsp 1825mm, hose-08-bsp 2620mm, hose-10-bsp 2520mm, hose-08-bsp 2860mm, hose-08-bsp 2650mm, hose-12-bsp 3900mm, pin and bush, bucket pin, pin, pin, tipping lever, pin dipper, bush, bush, pin, boom main pin, pin, pin top, pin pivot, pin pivot, pin boom ram, pin pivot, pin pivot, pin pivot, kpc kit and bush, bucket kit, seal kit, bucket seal kit, dipper seal kit, boom seal kit, seal slew kit, s t b, steering seal kit, loader seal kit, lift seal kit, bucket seal kit, rubber seal kit, boom seal kit, s t b kit, slew seal kit, loader seal kit, steering seal kit, loader and bucket welding, loader hard facing, bucket hard facing, loader toe plate welding, dipper cutting and welding, dipper nose welding, center pin slew welding, inner main plate welding, steblizer outer main plate welding, loader arm main slew welding, bucket main slew welding, boom dipper joint slew welding, loader kamani patta hard work welding, bucket kamani patta hard welding, bucket and loader tooth, loader toe plate, loader tooth set with nut bolt, bucket tooth set with nut bolt, bucket toe plate, js 30 poclain, bucket assembly-a, bucket 460 mm, tooth set with nutbolt, side cutter, toe plate, body installation assy., dozar, fuel tank assy., tank fuel, plug drain, sender fuel level, cap filter, stainer diesel filter, hydraulic tank assy., hydraulic tank, mounting filter, breather filter, gauge

corporations/Associations/Others

CTN :43047023

17 Dec, 2025 NA

Rayagada - Odisha

Tender For auction sale of m. s. scrap (heavy),m. s. scrap (light),compactor roll segment,godrej fork lift 3 ton cap,steel wire rope (cut pcs ),cast iron scrap,s.s. scrap mixed grade,copper scrap,aluminium bronze pressure ring (03 nos),brass scrap,electrical scrap,electrical scrap (series reactor 428 kvar, 33kv),electrical scrap (series reactor 214 kvar, 33kv),conveyor belt cut pcs,tyre scrap,charge machine tyre scrap,nickle crucible scrap,castable scrap, (lc-60%),ceramic nozzle for cs ladle (new),ceramic nozzle for ms ladle (new)

Central Government/Public Sector

CTN :43055552

30 Dec, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supplying, stacking and loading of 65mm machine crushed hard and durable track stone ballast as per rly's specification of february 2023 including all lead, lift, taxes, royalties, duties etc. at saraigram depot under assistant divisional engineer-beohari sub division

Central Government / Public Sector

CTN :43032413

13 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For replacement of machine set of techno make lift

State Government

CTN :42227399

10 Dec, 2025 7.97 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : construction of 125mm dia machine drilled bore well along with electro mechnical works required to lift the water upto the water storage tank at sanzipora nursery of mawer rang of langate forest division district kupwara.

corporations/Associations/Others

CTN :42485358

15 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :42485371

15 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the

corporations/Associations/Others

CTN :43000319

09 Dec, 2025 4.45 Lacs

Delhi - Delhi

Tender For supply of garden materials at purana quila nursery - improvement to purana quila nursery 2025-26.. sh: supply of garden materials at purana quila nursery. - supply of machine made earthen pots having size of upper dia inner side 23 cm, base dia outer side 18 cm, perpendicular height 22 cm (variation upto 05% allowed), supply of machine made earthen pots having size of upper dia inner side 18 cm, base dia outer side 14 cm, perpendicular height 17.50 cm (variation upto 05% allowed), hassan cloth 53 wide (weight of 01 meter piece should be 280 gm), supply of dithane m-45 (mencozeb 75%) kg per bag packing., supply of nuvan ( dichlorvos 76% )ec in 1 ltr packing, supply of chloropyriphos 20% e.c in 1 ltr packing, supply of carbendazim 50% wp (bavistin etc) in kg. per bag packing, supply of dimethoate 30% ec (rogor etc) in 1 ltr packing, supply of samosum (dark red colour) in 25 kg packing (isi mark), supply of carbousulfan 25 % ec in 1 ltr packing., supply and stacking of jamuna sand site including royalty and carriage up to all leads and lift, loading unloading etc. complete., supply and stacking of well decayed cattle manure at site including royalty and carriage up to 25 km leads and lifts, loading, unloading etc. complete (cattle manure measured in stacks will be reduced by 8% for payment), supply of plant nutrients npk mix (chemicalgade 20:20:20 ) of fertilizer or similar 1 kg. packing bag., supply ot bamboo brooms coconut with handle minimum weight 800 gm of brooms binded with heavy g.i. ring with lathi bamboo handle of 4 feet length.

Central Government/Public Sector

CTN :42736152

04 Dec, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : design engineering manufacturing installation testing and commissioning of one no. of machine room less mrl type 8 passenger lift g 2 in admin building of components sbu at, bel bangalore

Electric Traction Elevator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors