Latest electrical component Tenders | Government electrical component Tenders

State Government

CTN :45620582

02 Jul, 2026 3.61 Lacs

Bilaspur (Hp) - Himachal Pradesh

Tender For corrigendum : tender for providing installation testing and comissioning of various capacity split acs to avoid overheating of electrical distribution boards & sensitive electrical components at 33/11kv s/stn jabli feeding to aiims hospital and nearby areas & 33/11kv s/stn beri in electrical section jabli & beri respectively under electrical sub- division hpsebl no.iii & no.-i, hpsebl, bilaspur. (ts no. 26/2019-20 wbs no. d-19-1339)

Central Government/Public Sector

CTN :45605300

18 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 1 no. on-off switches and 1 no. 3 pin socket 6a, 250v ac with 2 nos. 1.0 amp. glass fuses with fuse holders. as per item-4. rcf drg no. -cc74247 alt.-g, edml-086, rev-8, table -3. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

State Government

CTN :45728701

20 Jul, 2026 NA

Koradi - Maharashtra

Tender For restoration of festoon cable system, control panels, braking system and other electrical components of coal mill crane at 3x660 mw ktps koradi.

corporations/Associations/Others

CTN :45700822

06 Jul, 2026 16.46 Lacs

Ajmer - Rajasthan

Tender For regular operation and maintenance of street lights and high mast light with material for two years at different industrial areas of ajmer zone, amounting to rs. 16.46 lakh - street light repairing work and on/off main switch in industrial areas of ajmer including rewiring of fixtures, changes of ballast, clamp, stater, condenser, tube rods, stater sheet, tube holder, mercury & sodium vapour lamps, ignitor & refixing on poles and change of fixtures, change of main switch, kit kat fuse wherever necessary complete including joining of jumpers, complete repairing of tube light fixtures, mercury vapour and sodium vapour lamp fixture ( all required material will be arranged by the contractor except new fixture). led fixtures., contract for operation and maintenance of high mast light (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast light, electrical panel, repairs of light with all required materials, replacement of necessary electrical components, cable, timer, contractor etc including excavation for cable and maintaining the light in good condition as per enclosed terms and conditions.

Central Government/Public Sector

CTN :45742682

10 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of register (v2) (q4) , satin ribbon (v3) (q4) , plain copier paper (v3) isi marked to is 14490 (q4) , glue stick (v3) (q4) , pressure sensitive adhesive tapes with plastic base (v4) conforming to is 13262 (q4) , drawing pins (v3) as per is 5205 (q4) , colour pencil (v2) (q4) , crayons (v3) (q4) , black lead pencils (v3) conforming to is 1375 (q4) , markers and highlighters (q4) , wax candle as per is 11359 (q4) , correction fluid pen(v3) (q4) , safety matches in boxes (v2) conforming to is 2653 (q4) , staplers(v3) (q4) , staple pins/staples(v3) (q4) , paper punch machine(v2) (q4) , water colours / poster colours (v2) (q4) , eraser (v2) (q4) , manual pencil sharpener (v3) (q4) , double sided tape (q4) , stationery scissors (v2) conforming to is 989 (q4) , sketch pens (v3) (q4) , writing pens (q4) , sticky notes (v2) (q4) , file/folder (v3) (q4) , metric scale (v2) conforming to is 1480 (q4) , trophy (v2) (q4) , mustard oil (????? ?? ???) (q4) , binder clips (v3) conforming to is 8231 (q4) , pen or pencil holders (v2) (q4)

State Government

CTN :45723782

30 Jul, 2026 3.45 Crore

Kota - Rajasthan

Tender For neurosurgery items consumable, proprietory,implants tender- (anterior cervical plating system variable angle screw system), (anterior cervical interbody fusion device with screw mechanism (zero profile), anterior cervical interbody fusion device with integrated plate., , cervical peek cage, , expandable corpectomy cages., , expandable corpectomy cages with integrated screw mechanism, , locking cervical cage with plate, , titanium mesh cage for vertebral body replacement per mm diameter, , odontoid screw, , top loading pedicle screw system, , ton loading presssembled bobravial nedicle, , a) polyaxial screw, , b) rod, , c) reduction screw, , d) cannulated polyaxial pedicle screw for reinforcing using bone cement, , transforaminal lumbar interbody fusion. (tlif), , a) cage for open surgery, , b) cage for endoscopic surgery, , posterior lumber interbody fusion plif., , kyphoplasty kit, , vertebroplasty kit, , hydroxyapatite (ha) coated pedicle screws, , multilevel percutaneous pedicle screw fixation for thoraco lumbo - sacral fixation., , a) pedicle screw, , b) rod, , pedicle screw system with cobalt chrome multiaxial head, , fenestrated percutaneous pedicle screw fixation system, , burr hole covers with screws, , vp shunt, , pressure valve, , omaya reservior, , theco paritoneal shunt, , dainage systen, , should be onlay dural graft,, , * should be bioabsorbable,, , * suturing/gluing should not be required,, , * should be sterile., , , , , , , , , , , , fibrin glue, , biological fibrin glue with calcium chloride human protein kit 2 ml, , flowable haemostate, , absorbable gelatine based topical flowable haemostate with prefilled syringe., , bone cement, , synthetic pmma & hydroxyapatite combine with osteoconductivity., , -should be 50% hydroxyapatite in the powder component., , spinal card implant, , inratheacal programmable pump, , dural patch, , recharge free implantable sacral neuro stimulator (mri compatible):, , nasal packing, , alcohol nasal packing with thread -equivalent to merocell of medtronics/ ultracel absorbent innovia, , dye indocyanine green dye- 20 ml/50 ml, , dye levulanic acid-020 ml/50 ml, , bipolar bipolar cable: compatible with alan made cautery, , bipolar cable, , cable: compatible with storz endoscopy cautery, , bipolar bipolar cable: compatible with shalya made cautery, , bipolar bipolar forceps non sticky tip bayonet / straight: compatible with alan made cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight: compatible with storz endoscopy cautery, , bipolar forceps, , forceps non sticky tip bayonet / straight:compatible with shalya made cautery, , shunt subcutaneous ventriculo peritoneal shunt passer (paediatric), , shunt subcutaneous ventriculo peritoneal shunt passer (adult), , microscope, , disposable microscope cover for pentero 900, , b, , c-arm cover, , ot shoes, , drapes, , antimicrobial/iodofor impregnated drapes of various sizes, , balloon catheter, , balloon catheter for endoscopic third ventriculostomy -4 fr/5 fr, , aneurysm clip (sugita type), , be made up of titanium/mri compatible material., , i. sugita type, , ii. made of titanium or mri compatible material, , iii. both temporary and permanent type, , iv. fenestrated/ non fenestrated, , v. in various shapes straight/ up curve/down curve/bayonet type/ right angle be lateral bent, , vi. sizes mini/5mm/6mm/7mm/8mm/9mm/10mm/ 12 mm in each shape and type, , vii. with clip applicators availability for both permanent and temporary clips of vam time of surgery, , cushing dural hook 140mm, , gruenwald forceps bayonet shape,- 7" t.c. tip, , 200mm mayo hegars needle holders, , hegar needle holder withgroove 20cm, , brain cannula 8mm, , brain cannula 10mm, , mayos scissors cd. 160mm, , gerald dressing forceps bayonetplain 190mm, , yasargil micro scissorstraight 185mm, , jacobson micro scissorcurved 185mm, , potts-yasargil micro scissor angled 45 deg, 185mm, , micro suture tying forceps straight tip 0.3mm x 150mm, , micro suture tyi

CTN :45717216

07 Jul, 2026 NA

Ahmednagar - Maharashtra

Tender For supply of drone electronics and electrical components rework station

CTN :45728589

17 Jul, 2026 NA

Liluah - West Bengal

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coatedsteel plate with 02 nos. on-off switches and 02 nos. 3 pin socket 06 amp, 250v ac with 04 nos. 1.0 a glassfuse with fuse holders of m/s.ferraz shawmut /cooper bussman or equivalent with the approval from the office of cede/rcf, as per rcf spec edml 086, rev-8,table-1, item no.-3 of rcf drg. no. cc74247, alt-g. [warranty period: 30 months after the date of delivery ] ]

CTN :45724719

13 Jul, 2026 47

Anekal - Karnataka

Tender For procurement of electrical items for neriga gp - led bulb 12wat, led tubeight 20w, cfl bulb holders, contractor 50 amps, electric tester, fuse cutouter 100amps, fuse cutouter 63amps, fuse cutouter 40amps, ip 65 out door led strip, cfl fitting 65w full set, cfl fitting 45w full set, safety glouse, safety shoes 7- 10 inches, cutting palyer, condenser 3way, condenser 2 way, bulb 250w sodium, sv chowk 250wattage, sodium light full set 250w, mcp - 63 amps 2p, mcp - 40 amps 2p, mcp - 32 amps 2p, mcp - 25 amps 2p, mcp - 16 amps 2p, pingani cfl holder, gi wire 20 gauge, insulation tape , dp switch 32amps open type, copper cabel 10 sq mm, copper cabel 6 sq mm, copper cabel 4 sq mm, copper cabel 2.5 sq mm, copper cabel 1.5 sq mm, copper cabel 1 sq mm, bed switches 16a, alluminium 4sq cabel, alluminium 20sq cabel, alluminium 16sq cabel, alluminium 10sq cabel, led bulb 60w, led bulb 50watts, led bulb 40w, led bulb 30w, led bulb 23w, led bulb 18watts, led bulb 9w, alluminium 6sq cabel

Electrical Component Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government