Latest electrical connector Tenders | Government electrical connector Tenders

Central Government/Public Sector

CTN :40230002

15 Jul, 2025 NA

Sonitpur - Assam

Tender For corrigendum : supply of terminal connector as per powergrid technical specification , 36 kv ct[ 200: 1] as per ts for ngr bypass scheme implementation in nerts , 36 kv ct[ 1000: 1] as per ts for ngr bypass scheme implementation in nerts

CTN :40922231

15 Jul, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of pa driver card of 40w jammer aqua , driver card of 40w jammer aqua , mosfet stps 2045 ct of 40w jammer aqua , ra 08 1317m of 200w jammer ashi , power connector male type of 200w jammer ashi , crocodile clip of 200w jammer ashi , cable red and black 1.5 mtr of 200w jammer ashi , fuse 15 amp of 200w jammer ashi

Central Government/Public Sector

CTN :40901328

23 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For procurement of infrared emitters and driver circuit board for ir emitters - procurement of infrared emitters & driver circuit board for ir emitters, infrared-emitter his2000r-c300-6 thermal ir emitter (his power) housing: to-8 with integrated gold-plated reflector hermetically sealed to-8 standard cap housing height: 6.86 mm window: glued calcium fluoride window (caf2) electrical connections: 2 (no ground connection for the housing) gas filling: nitrogen (n2) emitter filament: nickel-chromium (nicr), coated on both sides radiating area: 40 mm2 wavelength range: 2 to 11 m electrical cold resistance: 5 to 6 ohm maximum electrical power: 2.5 w, infrared-emitter his2000r-bwc300 thermal ir emitter (his power) housing: to-8 with integrated gold-plated reflector hermetically sealed to-8 special cap with gold-plated winston cone housing height: 16.80 mm window: soldered barium fluoride window (baf2) electrical connections: 2 (no ground connection for the housing) gas filling: nitrogen (n2) emitter filament: nickel-chromium (nicr), coated on both sides radiating area: 40 mm2 wavelength range: 2 to 14 m electrical cold resistance: 5 to 6 ohm maximum electrical power: 2.5 w, driver circuit board dcb.8.2500 for ir emitters ofthe his power series (to-8) for a quick evaluation of thermal ir emitters of the hispower series preset ir emitter electrical power: 2.5 w without ir emitter external dimension: (25 x 25) mm driver circuit board thickness: 1.0 mm operating voltage: 4.3 to 6.0 v input voltage range for low/off pulse signal: 0 to 1.0 v input voltage range for high/on pulse signal: > 1.5 v (max. up to operating voltage) electrical connector: 3-pin molex pico blade 1.25 mm

Central Government/Public Sector

CTN :40905403

16 Jul, 2025 NA

Danapur - Bihar

Tender For supply of expansion type terminal connector to suit 50 dia aluminum tubular bus bar to terminal pad of 25 kv ct/isolator/cb and interrupter including fasteners as per drawing eti/ psi/ p/ 110 60 mod -c or latest and confirming to specification ti/spc/ohe/fittings/0130-10/13-rev-1. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40902594

11 Jul, 2025 NA

Margao - Goa

Tender For supply of boq for supply of 21nos items for maintenance of psi e e - supply of rigid type bimetallic connector suitable for 50 dia , supply of rigid type terminal connector suitable for 36 mm , supply of 36 mm aluminium bus tee connector , expansion type terminal connector to suit 50mm dia , rigid through connector to suit for 50 mm diameter , supply of 36mm aluminium tee terminal , terminal connector for 110 kv ct pt cb and db isolator rigid type , 110kv system tee to suit zebra 26 point 68 dia acsr conductor , rigid clamp for 110 kv support insulator , terminal connector for 25 kv pt protection , 25 kv system tee connector to suit 36 mm , rigid clamp for 25 kv support insulator 50 mm , tee connector for 50mm o d aluminium bus bar , rigid connector for hv side , expansion connector on lv side of 110 27kv transformer , 36mm aluminium bus splice , 36 15mm tap connector with ri number 6520 , 36 20mm terminal connector with ri number 6530 , terminal connector suitable for 20mm spider aac with termina , gi nut bolt 16x50x38 mm , 12x60 30mm bolt s s with nut lock nut double plane washer

Central Government/Public Sector

CTN :40402775

02 Jul, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of general electrical items for maintenance work - 20 amp modular socket , 10amp modular switch , 20a 1p modular mcb , back entry bakelite fuse, 100 amps , back entry bakelite fuse, 63 amps , 20amp 2p mcb with encloser , gang box pvc 6way for switch socket w o , 1 inch pvc pipe , 1 inch pvc bend , 1 inch pvc elbow , 1 inch pvc junction box 3way , din rail mcb channel , capacitors 2.5 mfd, 440v for ceiling fan , 2 way junction box outdoor , 100 amp 4p bakelite connector , led driver , energy meter, 3 phase, ac , 3ph energy meter ct operated

Central Government/Public Sector

CTN :40874045

09 Jul, 2025 NA

Multi City - Multi State

Tender For supply of bimetallic terminal connector to suit zebra acsr conductor and 30 dia copperstud of ct/cb/traction power transformer (11011 & 11012) as per rdso specification noti/spc/ohe/fitting/013 0- (10/13), rev-1 and drawing no eti/psi/p/11010, rec- c or latest(withfasteners complete). [ warranty period: 30 months after the date of delivery ]

CTN :40858579

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For 10/edc(s)/2025-26 - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted on all 04 corners and 01 side for gate.

CTN :40858581

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd-lambhua,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

CTN :40858583

04 Jul, 2025 19.98 Lacs

Sultanpur - Uttar Pradesh

Tender For runningcontractfordepositworksunderedd-baldirai,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

Electrical Connector Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector