Tender For corrigendum : tender for supply of electrical consumable and miscellaneous items for hurl sindri c - cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-100mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length-200mm, material nylon 66, pack size 100. cable tie, lock type cut to open, colour-white, thickness-2.5mm, length 300mm, material nylon 66, pack size 100. electricalcontactcleaner spray, quick dry, packing size for liquid(ml)-500ml galvanized zinc spray, finish type-bright silver, zinc-enriched coating to repair surface damage protection against corrosion, special feature-rust resistance, packing size for liquid(ml)-500ml. silica gel, colour of silica gel-blue, particle size -9 to 12 mm, air tight container for packing of silica gel-plastic. silicon sealant, physical state- viscous paste, appearance-translucent/ opaque, color-clear/black/white/gray, surface cure-5-10 min, packing size(ml)-300ml m-seal, shelf life 12 months, hardness 75-80, impact strength - 2.5 * 3kg / c * m setting time at 30 deg c min-60 min, working temp limit 80 deg. c component resin and hardness, packaging size-1 kg gap filling pu foam spray(puf seal), application fill the gap between wall & tray, conduit pipe and wire sealing, packing size for liquid(ml)-750ml. silicon sealant gun, feed type: push-fed gun, type: cordless-corded glue gun pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour red, length-6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive- rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour yellow, length 6.5 mtr, voltage resistance-lipto 600v. pvc tape, material-pvc, adhesive- rubber bases adhesive, adhesive side-single side, temperature range (-40 degree c to 125 degree c), colour blue, length 6.5 mtr, voltage resistance-upto 600v pvc tape, material -pvc, adhesive rubber bases adhesive, adhesive side- single side, temperature range(-40 degree c to 125 degree c), colour-black, length 6.5 mtr, voltage resistance- upto 600v. pvc tape, material pvc, adhesive-rubber bases adhesive, adhesive side- single side, temperature range (-40 degree c to 125 degree c), colour green, length 6.5 mtr, voltage resistance upto goov ht-tape, self bonding electric tape, for high-voltage(upto 69kv), corona and ozone resistant, moisture and corrosion resistant, overload temperature 130 deg. c. roll size 9.15 meters. teflon tape, packing type-piece, elongation % 50-60, length of tape-9 mtr, application of colour tape white al foil tape, color-sever, type-aluminium foil tape 2 inch, cello tape type single sided, tape dispenser type-high bond, self adhesive, cello tape roll size-15 meters waste cotton doth emery paper, grit size grit 40-60, material emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel. roll length-40 inch. emery paper, grit size-grit 220-400, material-emery, form-belt, bonding type-resin, coat type-open coat, suitable material mild steel, stainless steel roll length 280 mn trubble gum, strong glue trap, type- glue board, container type-sachet, protection against-rats titanium putty, 1 kg 1.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 200 2.5 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 100 4 sq.mm ring type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 10 1.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material-copper, minimum pack of 200 2.5 sq.mm pin type lug, insulated type, rated voltage-upto 1100v, material copper, minimum pack of 20
Tender For corrigendum : supply, installation and commissioning of electrically operated set of wind screen wiper assembly complete with wiper motor, wiper arm with blade & pipe connections & water spray wind screen washing system including connections/tube & fittings completefor 3 phase locomotives as per plw's frs no. plw/ldo/loco/e wiper-002 rev. 0 to drawing no. 1209-08.130-511, alt. 1, drawing no. 1209-08.130 263 alt. 3 and drawing no. 1209-08.130-019 alt. 1. note: scope of supply as per clause 3 of plw's frs no. plw/ldo/loco/e wiper-002 rev.0. [warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] [ rate of supply 11 units per month , commencement time allowed -2 month ]
Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl
Tender For supply of the first ac pillow shall have dimensions of 55 cm x 40 cm as per sl. no. (ii) of table 5 of is 18930:2024, the filling material shall consist of virgin hollow conjugated 7 denier polyester fibre conforming to table 4 of is 18930:2024, with a mass of fibre filling of 450 gm. the body fabric (casing) shall be plain weave polyester - cotton in the ratio of 65:35, conforming to type 4 of table 1 of is 18930:2024, grey in colour. the pillow shall bear the sr (southern railway) monogram along with the month and year of manufacture, printed on a flyer/tag/label stitched securely on either of the two diagonal corners of the cloth cover, capable of withstanding repeated washing. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of hydrochloric toilet cleaning acid, brand- vedika or zep or equivalent , coconut stick hard broom - khadika jhadu, dia 6 inch x 35 inch long, wt. 500 gm or above , coconut stick soft broom - phula jhadu, dia 6 inch x 35 inch long, wt. 350 gm or above. brand- gala or scotch brite , dry mop with long handle,mop size 50 cm or above, roots or gala , dry mop refill, mop size 50 cm or above, brand- roots or gala,for sl no 4 item , ezee liquid detergent- 1 ltr , hand brush - tile scrubber brush, size 10.4l x 7.3w x 16.5h cm , toilet brush, 19 inch long, brand- cello or gala or scotch brite , liquid soap- 5 ltr , naphthalene balls- 1 kg pkt , white phenyl, brand- nimyle or doctor or appollo pharmacy , room freshener- 220 ml, brand- odonil or godrej , washing powder- 1 kg pkt, brand- wheel or tide , bleaching powder, 25 kg pack , brand- lion or vikram or idd or bengal chemical , floor cleaning wiper with long handle, size 40-50 cm, brand- roots or gala or cello
Tender For corrigendum : supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electricalcontactcleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell
Tender For multipurpose cleaning gel for loco washing as per technical specification given below: 1) appearance - clear, slightly yellow 2) density (25 degree c) -1.0 to1.3g/ml 3) ph (25 degree c)- 9 to 11 4) conductivity (25degree c) -50 to 55 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b. (note: 1 no= approx. 30 kgs. container) make/model: dst-degreez/9 or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer, otherwise offer will not be considered 2) firm shall comply all the details about the technical specification in the tender.3) firm must also ensure that complete dust, oil contamination, grease marks are removed. application : in highly dusty, oily, greasy environment of electric loco maintaining shed. firm must ensure that it cleans oil, grease including cardium compound. 4) one sample to be got approved before effecting bulk supply. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]