Latest electrical fittings scrap Tenders | Government electrical fittings scrap Tenders

State Government

CTN :45234524

23 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of electrical equipment at gp/sillewada/zp/ngp/tender no1/2026-27/1st call - 1/18 wire copper, 2.5 mm service wire, 4mm service wire, 6mm service wire, 10mm service wire, 2.5mm autocable wire, 4mm autocale wire, pendent holder anchor, tape roll anchor, 5w led bubl havells / bajaj / philips / osram / syska, 7w led bubl havells / bajaj / philips/osram / syska, 9w led bubl havells / bajaj / philips /osram / syska, 12w led bulb havells /wipro / philips / osram / syska, 15w led bulb havells / wipro / philips /osram /syska, 20w led bulb havells / wipro / philips /osram /syska, 23w led bulb havells / wipro / philips /osram /syska, 26w led bulb havells / wipro / philips /osram /syska, 30w led bulb havells / wipro / philips /osram /syska, 15w led bulb havells / wipro / philips /osram /syska, 18w led bulb havells / wipro / philips /osram /syska, 20w led bulb havells / wipro / philips /osram /syska, 24w led bulb havells / wipro / philips /osram /syska, 30w led bulb havells / wipro / philips /osram /syska, 36w led bulb havells / wipro / philips /osram /syska, 40w led bulb havells / wipro / philips /osram /syska, 50w led bulb havells / wipro / philips /osram /syska, claim for street light, led bulb fitting 18 to 30w, ceiling fan (all type), desert cooler (all type), wall fan orient/ havells, larex cooler 20inch, 4fit

corporations/Associations/Others

CTN :45288365

29 May, 2026 29.65 Lacs

Sindhudurg - Maharashtra

Tender For providing manpower for operation, maintance and repairs for a period of 3 years for electrical systems and equipment at the aruna project, including lt lines, diesel generator, gates, street lighting etc as well as the electrical substation, street

State Government

CTN :45279075

22 Jun, 2026 3.70 Crore

Ahmedabad - Gujarat

Tender For comprehensive operation, preventive maintenance & repairs of all civil structures, various type of pipeline, various type of valves, storage structures,5 mld water treatment plant (with chemical charges)machineries ,all pumping machineries for hebatpur main h.w electrical equipment of wtp etc. located at hebatpur head works and different sub head work sites including standard quality & quantity supply of potable water to all the villages for 60 months period, including maintaining 0.2 ppm residual chlorine in supplied water at each consumer endin all respect as per detailed specification & obligatory requirement excluding electricity charges raw water charges under seven rwss bhangadh group, tal.- dholera of district ahmedabad..

State Government

CTN :45285370

22 Jun, 2026 6.64 Crore

Kutch - Gujarat

Tender For comprehensive operation & maintenance of civil & electromechanical assets such as intake wells/structures structures, staff quarters, pump house, all bulk transmission and distribution pipelines, valves, pumping machinery & electrical equipment etc. for the 150 mld jackwell no 3 water supply scheme/s, including supply of 150 mld raw water to sapeda gwil hw 60 months period. district: kutch based on tappardam excluding supply of pac, bleaching powder and chlorine gas. ( including all electromechanical componenet , 1516 mm dia ms pipe , 6 nos of ex army security for tappardam , line man and pump operator )( vt pump 4+2 - 1700 m3 / hr , 76 m head , 550 kw )

State Government

CTN :45287294

11 Jun, 2026 NA

Akola - Maharashtra

Tender For work of removal and reconnection of various electrical equipment s, welding machines, dewatering pumps etc. during unit #3 aoh/coh at paras tps.

Central Government/Public Sector

CTN :45280162

11 Jun, 2026 NA

Parganas - West Bengal

Tender For providing of custom bid for services - annual maintenance contract for repair, maintenance, troubleshooting of electrical installations, systems, equipment, fittings, fixtures including o&m

Central Government/Public Sector

CTN :45296402

01 Jun, 2026 NA

Burnpur - West Bengal

Tender For providing of custom bid for services - round the clock inspection health monitoring and maintenance of all electrical equipment in eot cranes telphers and hoists etc in wire rod mill and bar mill

Central Government/Public Sector

CTN :45282747

11 Jun, 2026 NA

Mumbai - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; electrical system or installation, value based biennial rate contract for miscellaneous cleaning/maintenance jobs on electrical equipment for the year 202..

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

Electrical Fittings Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors