Latest electrical furnace scrap Tenders | Government electrical furnace scrap Tenders

Central Government / Public Sector

CTN :40119290

10 Jun, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of burners for dryer packages - item no. 10 sap code 1399960051 , item no. 20 sap code 1399960061 , item no. 30 sap code 1399960071 , item no. 40 sap code 1399960081 , item no. 50 sap code 1399960091 , item no. 60 sap code 1399960101

State Government

CTN :40560629

23 Jun, 2025 NA

Amravati - Maharashtra

Tender For supply of laboratory equipments /laptop/printer - flash chromatography system model a1700x-200ml yamazen carporation, japan make, programmable elution modes: isocratic step, linear & rf gradient, pumping flow rate: 5-200 ml/min, maximum pressure: 1.5 mpa (15 bar/217 psi), no. of solvents: use up to 4 solvents in a gradient, uv detection: dual variable wavelength pda uv vis, detector 200-800 nm,uv detector sensitivity: 0.02-10.24 saufs, fractionation modes: time manual, peak, peak& slope (valley)02, automated densitometer with 4 reading channelsmake- genaxy/thistle/cleaverdensitometer a universal densitometer scanner with software capable of reading 144test per min. is available for band quantitation following post electrophoresis staining ordering information-cell as gel application packages equipped with bridges applicator and clinical test kit, 1x4 -specimen semi micro applicator volume applied sample band with compatible strip size: 5.7x14cm, cell as gel wet membrane bridges and densitometer, 1x8.5 cm bridge for 1x5.7x7x14cm or 2x2.5x14cm cell as gel. strip cat no. cslbg8.55 terbo scan software densitometer (excludes computer and scanner) cat no. csldens flat belt scanner for turbo scan software cat no. csscan, uv transilluminatormake- genaxy/thistle/cleaverresearch model: 312nm single wavelength transilluminator for detection of more than 0.1 ng of dna filter area (cm) uv 20 x 20cm , analytical balance make- aczet/radwag/sartoriuscapacity :220gm readability : 0.1mg repairability: 0.2mg response time: 2-3 sec pan size : 90mm display: lcd backlite calibration : motorized internal calibration, probe sonicator (touch screen) with sound proof enclosure make-labman/aczet/sonic temperature indicator and controller touchscreen display - 4.3 inches tft user password protection available microprocessor controlled and completely programmable. large lcd display with time setting. auto-tuning for convenience and optimal processing efficiency. variable power output control. auto frequency tracking output amplitude 0-100% adjustment. automatic fault alarm. frequency 20-25khz-automatic tracking process capacity 0.5-500ml (approx.) probe dia (titanium alloy) standard 6mm (1/4") display 4.3 inches tft display function temperature, power, time, etc. temperature range( c) 0-99 c timer (selectable) yes overload protection yes user password protection available input method touch screen control, data memory 20 groups output power 6.5-650w (adjustable) power supply : ac 220v/50hz, pulveriser/grinder make-ideal/mac/amccommercial dry grinder are used for grinding different types of products like spices, fresh ginger, salt, sugar, leaves, herbal products, cattle and poultry feeds, icing sugar, custard powder, instant food, food colors and allied food production. 3 hp motor deluxe model camber size: 10 x 5 cm. capacity: 20-25kg./hr., decoction apparatus gas operated decoction making machinemake-ideal/mac/amcvessel capacity: 15 liters for 1 to 5 lit production capacity, motor: /1 hp single phase motor fuel: lpg (fitted with i no. burners) all contact parts in 304 grade stainless steel complete structure in mild steel ready to use with all standard accessories wi s.s. bucket 10 ltr., s.s. mesh, & s.s. round tank, cooling centrifuge make-remi/eppendrof/thermo programable compensation for true sample temperature: yes pre cooling: yes acceleration profiles: 9 deceleration profiles: 9 & coasting fast spin: yes display: lcd control communication: digital parameters setting switches: bi-directional encoder brushless motor with frequency drive: yes inverter fault detection with auto shut down: yes cfc free refrigeration system: yes no. of programs: 99 last set parameters recall: yes choice of rpm/ref setting: rpm/rcf digital countdown timer 0-99 min & continuous run: yes automatic rotor identification: yes emergency lid lock release: yes password protection: yes gas hinge to prevent door falling: yes imbalance detection with centrifugatio

State Government

CTN :40314793

03 Jun, 2025 2.46 Lacs

Multi City - Telangana

Tender For corrigendum : service charges rendered by ex-bhel service personnel to execute the overhaul of boiler pressure parts and boiler burners-reg.

Central Government / Public Sector

CTN :40477970

05 Jun, 2025 31.50 Lacs

Vadodara - Gujarat

Tender For providing of custom bid for services - 9030c25b38 supervision services for installation of furnace burners replacement modification associated refractory job and other allied activities for 14 ff 00 01 and 16 ff 00 01 and 15 ff 00 01 02 03 04

State Government

CTN :39605750

06 Jun, 2025 1.19 Crore

Kutch - Gujarat

Tender For corrigendum : providing of repair and overhauling service - work of complete overhauling of boiler pressure part coal burners for unit 3 75 mw at kltps during aoh coh; boiler pressure part; yes; buyer premises

State Government

CTN :40383699

13 Jun, 2025 3.28 Crore

Kheda - Gujarat

Tender For providing of operation and maintenance power house / power plant -work of complete overhauling of boilers with air pre heater, btd,coal & oil burners of 210 mw boilers (stage i: 3 boilers) of wtps

State Government

CTN :40384428

01 Jul, 2025 3.28 Crore

Kheda - Gujarat

Tender For providing of operation and maintenance power house / power plant - as per atc work of complete overhauling of boilers with air pre heater, btd,coal & oil burners of 210 mw boilers (stage i: 3 boilers) of wtps.

Central Government / Public Sector

CTN :40434087

03 Jun, 2025 NA

Secunderabad - Telangana

Tender For supply of set consisting of 9 items including certification and replacement charges for necessary lpg gas pipe line and accessories in mi litary kitchen coach no. m 174274/155809 (1) burners- qty.11 nos./set (2) hose pipes- qty.10 nos./set (3) lpg regulators- qty.12 nos./set ( 4) copper joint connecters- qty.10 nos./set (5) regulator pipes- qty.12 nos./set (6) regulator valves ? 02 nos./set (7) washers- qty.02 pkts /set (8) replacement charges qty.01 lot/set (9) chartered engineer certification- qty.01 no./set. [ warranty period: 30 months after the d ate of delivery ]

Central Government/Public Sector

CTN :40323954

03 Jun, 2025 NA

Patna - Bihar

Tender For empanelment of contractors/suppliers/vendors/service providers for various trades/procurement/supply, etc. at nabard bihar regional office, 4th floor, b-block, maurya lok complex, dak bungalow chauraha - 1. providing office stationery items viz. papers, pens, folders, etc. and other items such as epabx/pabx, paper shredder machines, clocks, calculators, telephone, weighing machines etc. 2. ups/batteries, air conditioners, televisions, ceiling/ pedestal/ wall mounted fans, geysers, water purifiers, water coolers, refrigerators, washing machines automated tea/ coffee vending machines, dish wash machines, fly killer machines, etc. 3. chairs, tables, workstations (modular), beds, sofa sets, dining sets, etc. 4. access control system, cctv, etc. 5. disposal of all types of scrap. 6. courier service (local as well as other places) etc. 7. to manage events and various meetings/seminar conducted by bank 8. suppliers of plumbing & sanitary fixtures for office/quarters, etc. 9. supply of range of tools and materials, including hand tools like hammers and chisels, power tools such as saws and drills, and various accessories like clamps and measuring tools along with safety equipments. 10. suppliers/servicing of various types of gym related equipment and carrying out maintenance of gym equipment services at regional office and all 05 quarters under work contract basis 11. suppliers for computers, hardware, software's, mfds, scanners, projectors, accessories, cable supply & laying services, conventional desktop pcs, all-in-one pcs, laptops, printers, multifunction printers, 3-in-1 printers, scanners, adf scanners, fax machines, lcd projectors, keyboards, monitors and other it peripheral devices, network switches and associated works, servers, routers, firewall, network integration, data backup services etc. 12. various types of bank advertisements like press release, tenders, notices etc. 13. suppliers of firefighting equipment, etc. 14. to supply gardening equipments/planters/plants etc. at regional office and all 05 quarters. 15. to carry out the maintenance of all ht/lt line & other electrical fittings at regional office and all 05 quarters by providing requested certified electrical staffs on manpower basis 16. to carry out pest control and anti-termite services at regional office and all 05 quarters under work contract basis 17. providing general insurance cover against receipt of premium for bank's various properties such as office and staff quarters, furniture and fixtures, vehicles, etc. also, empanelment of licensed assessors for the general insurance. 18. supply for office and staff quarters - gas stove/burners, grinding machines, utensils, crockery, etc. 19. spiral binding, binding works, laminations, printing etc. 20. printing various publications / booklets. preparation of banners for special occasions. 21. providing and replacing cartridges of required make and model in the printers in office. 22. supply and related services of sports items at office and staff qtrs. 23. providing fast-moving consumable goods, cleaning materials at the office and staff qtrs. 24. providing e-waste services at office 25. audio visual equipment and related services like pa system at office 26. to provide laundry services in office/vof/vef of nabard bihar ro etc. 27. to provide services in nabard staff quarters/office premises. 28. includes emergency lockout assistance, lock installation and repair, key cutting and duplication, re-keying, and security consultations etc. 29. to plan, design and prepare bill of materials and estimates of works costs for civil works including all masonry, plumbing, electrical, carpentry, and renovation works 30. to plan, design and prepare bills of materials and estimates of costs for civil works including all masonry, plumbing, electrical, carpentry and renovation works. 31. to plan, design and prepare bills of materials and estimates of costs for civil works including all masonry, plumbing, electrical,

Electrical Furnace Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors