Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c
Tender For annual rate contract for providing and fixing of raycem/mseal/cabseal or equivalent make 11 kv heat shrinkable outdoor, indoor & straight through joint type cable termination kit for end termination of 11 kv xlpe type power cable at various sub-stations under gondal transmission circle as and when required
Tender For supply of accessories for cable- (i)piercing connector type-i 16-50, (ii)piercing connector type-ii 16-50, (i)piercing connector type-i for single phase/ three phase (main 70-150 sqmm. tape of 50-95sqmm), (ii)piercing connector type-ii (main 70-150 sqmm tape-of 50-95 sqmm), suspension clamp with attachment, tension clamp with attachment, cable straight-through joint kit suitable for 70 sqmm, cable end termination kit suitable for 70 sqmm, i)t clamp for bus bar for dog to dog conductor, ii)terminal clamp for busbar for panther conductor, bi-metallic clamps for vcb, bi-metallic clamps for transformer, 30v 100ah lead acid battery, battery charger suitable for 30 v 100ah battery, 30v dc lithium-ion battery set, lt robust fuse unit/switch fuse unit, gi pipe 150mm b grade, gi pipe 150mm a grade, heat shrinkable cable jointing kit with lugs for 33/11 kv 3 core (33/11kv, 3*300 sqmm), (i)ht bi-metallic clamps for dtr, (ii)lt bi-metallic clamps for dtr, (i) dc distribution board with mcb, (ii)ac distribution board with mcb, led lamp complete fitting, (i) aluminium lugs 70 sqmm, (ii) aluminium lugs 150 sqmm, (iii) aluminium lugs 300 sqmm, pf unit (kitkat) 200 amp., pf unit (kitkat) 300 amp., hrc fuse base 200/250 amp., hrc fuse base 300 amp., hrc fuse base 400 amp., hrc fuse link 200/250 amp., hrc fuse link 300 amp., hrc fuse link 400 amp, hand operated chain pulley block 3 ton, silica gel breather 500 gm., (i) bi-metallic clamp suitable for 12mm dia lt stud, (ii) bi-metallic clamp suitable for 20mm dia lt stud, (iii) bi-metallic clamp suitable for ht stud, i) i-bolt 20 mm., ii) i-bolt 16 mm., t.c. fuse wire 14,16,18 & 20 swg, ethical & generic medicines and surgical items for dispensary mppkvvcl, ujjain
Tender For corrigendum : procurement of electrical spare items for electrical estate, bel bangalore - procurement of electrical spare items, switch sp,5amps,flush mounting (bel part no.990110006826), universal socket 5a (bel part no.990110005759), capacitor 2.25mfd (bel part no. 990110511808), open dp switch 32a (bel part no.990010298004), electronic regulator (bel part no.990072007852), heating element for geyser 2 kw (bel part no.990174051270), immersion heating element (bel part no.990110134672), water heater element round type (bel part no.990010298974), water heater element oveltype (bel part no.990010298295), thermostat (bel part no.990010074031), rigid pvc conduit 1" (bel part no.990010000666), pvc pipe-3/4"(19mm)dia (bel part no.990072023178), gangway box 1way (bel part no.990110027972), exhaust fan 250mm plastic body (bel part no.990010265412), insulation tape (different colours) (bel part no.995010234008), bioline gel(petrolium gelly) (bel part no.990210001351), hylum sheet 2400mmx1200mmx3mm-white (bel part no.990010000903), pvc casing & caping 20mm white (bel part no.990110020891), pvc casing caping 1" (bel part no.990010000434), piercng connectrs,16-95sqmm(abc) (bel part no.990010000693), led bulb 7w warm light (bel part no.990010204787), 50w led flood light luminaire (bel part no.990010002082), 200w led flood light (bel part no.990010213032), street light led fitting, 150w (bel part no.990010000994), led post top light fitting 40w (bel part no.990010224284), 4 sq mm, pvc, multistrand, cu wire (bel part no.990010000736), 2.5 sqmm, pvc, multistrand cu wire (bel part no.990010000735), 1.5sqmm, pvc multistrand copper wire (bel part no.990010000271), twin flat 1sqmm 2core cable (bel part no.990010298101), 2.5 sq-mm - 3core cu- cable (bel part no.990010000125), cable al armoured 4core,10sqmm (bel part no.990110033210), cable aluminium,4 core,16sqmm (bel part no.990110033113), al.flat cable 2.5sqmm,twin cor (bel part no.990110077636), al 2x16sqmm abc 2core cable (bel part no.990010297907), heat shrinkable cable jointing straight (bel part no.990074009447), cable jointing kit for 25 sqm (bel part no.990074008865), 1.1kv heat shrk st.jt-kit-3.5gx50sqmm (bel part no.990010190722), 1.1kv heat shrk st.jt-kit-3.5gx95sqmm (bel part no.990010190916), 10a - switch (make-anchor roma). (bel part no.990072037534), metal cutting blades (bel part no.995010827066), hole saw cutter 18mm (bel part no.990310305230), hole saw cutter 25mm (bel part no. 990310305327), hole saw cutter 30mm dia (bel part no.990010197124), hole saw cutter 50mm dia (bel part no.990010197221), high speed steel drill bit set (bel part no.990210763345), flat spaner set (bel part no.995010290462), rong spaner set (bel part no.995010290559), smc junction box 240x130x110mm2 (bel part no.990010002046), smc meter box (bel part no.990410000115), smc meter box (bel part no.990010000290), air blower (bel part no.990210742490), hot air blower (bel part no.990010272202)
Tender For procurement of supply of 11kv heat shrinkable cable end termination kit 3x120mm2(o/d type) and 3x400mm2(o/d type) in various sub-divisions working under operation circle, hpsebl, una under ceohz, hpsebl, hamirpur
Tender For supply of moulded case circuit breakers (mccb) conforming to is/iec 60947 (part 2) (q2) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , led garden light (v2) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led batten light (led tube light) (v2) (q2) , surface mounted ceiling light 10watt , heat shrinkable jointing kit straight through 95 sqmm , aluminium cable 10 sqmm 2 core , 1.5 sqmm single core cable copper , led recessed light 10 watt , manual change over switch 4 pole 100 amp , inverter street light 60watt , inverter street light 45 watt
Tender For supply of traction transformer complete with cooling system & accessories like h.t. cable along with protection shield in passenger compartment and underframe area, thermostat etc. related protection equipment and with safety chain arrangement including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, equipment mounting and earthing hardware and accessories as per attached specification suitable for 3 phase memu (medha, on-board). make/brand-siemens/medha [ warranty period: 30 months after the date of delivery ] ]
Tender For rate contract for supply of electric material(ht/lt) t&p/equipments/hardware items etc.for std udhampur -balance items. note :the bidders are advised to quote the reasonable rates for supply of all the items mentioned in boq. any rate quoted as zero shall be assumed that the firm is unwilling to supply the particular item and next lowest rate shall be considered as l1 for that particular item. - xlpe power cable (make havells or any other reputed make conforming to relevant is specifications) :, 11 kv single-core xlpe armoured cable 630 mm2, 11 kv 3-core xlpe armoured cable 185 mm2, twin core al lt cable 16 mm2 pvc cable (al), lt xlpe al cable 3.5 core armoured x95 sqmm (3 x 95 + 1 x 70 + 1 x 16), 33 kv cable termination kits outdoor (make havells or any other reputed make conforming to relevant is specifications) :, cable termination kits 33 kv heat shrinkable outdoor type 300 mm2 (single core), 33 kv cable termination kits heat shrinkable 300 sqmm -3 core, 33 kv cable termination kits heat shrinkable 240 sqmm -3 core, 33 kv cable termination kits heat shrinkable 185 sqmm -3 core, 11 kv cable termination kits outdoor/indoor (make havells or any other reputed make conforming to relevant is specifications), a)cable kits 11 kv heat shrinkable indoor 630 mm2 (single core), b) cable kits 11 kv heat shrinkable indoor 400 mm2- 3 core, c) cable kits 11 kv heat shrinkable indoor 300 mm2 - 3 core, d) cable kits 11 kv heat shrinkable indoor 240 mm- 3 core, e) cable kits 11 kv heat shrinkable indoor 185mm2 - 3 core, f) cable kits 11 kv heat shrinkable indoor 120 mm2 - 3 core, g) cable kits 11 kv heat shrinkable outdoor 630 mm2 - 1 core, i)cable kits 11 kv heat shrinkable outdoor 400 mm2 - 3 core, j) cable kits 11 kv heat shrinkable outdoor 240 mm2- 3 core, k) cable kits 11 kv heat shrinkable outdoor 185 mm2- 3 core, l) cable kits 11 kv heat shrinkable outdoor 120 mm2- 3 core, 11 kv straight through joints, 11 kv cable straight through joints heat shrinkable 240 sqmm - 3 core, 11 kv cable straight through joints heat shrinkable 185 sqmm - 3 core, e)11 kv cable straight through joints heat shrinkable 120 sqmm - 3 core, control cable, a) 2.5 mm2 cu 2-core, b) 2.5 mm2 cu 4-core, c) 2.5 mm2 cu 6-core, d) 2.5 mm2 cu 8-core, e) 2.5 mm2 cu 10-core, f) 2.5 mm2 cu 12-core, g) 2.5 mm2 cu 16-core, battery chargers & battery bank , maintenance free 32 v lead acid battery (vrla) bank comprising of 16 nos of 2 volt cells of 100 ah capacity make hbl, exide, amaraja etc, 32 v battery charger automatic (float & boost) compatible for vrla batteries, 3 phase, 415 v ac , 50 hz ,4 wire 36 v , 30-40 a, with 4 outgoing feeders and with all protections, 33 kv & 11 kv insulators make iec, bhel, rastriya, top line, tcpl or any other reputed make conforming to relevant is specification , 33 kv post insulator 24 mm, 11 kv guy insulator 90 x 65, 33 kv hardware fittings, 33 kv tension fittings for acsr dog conductor, t & c 3 u-bolts type (approx. 2.8 kg) al wt 400 gm, 33 kv suspension fittings for acsr dog conductor -( wt 1.8 kg), spares for 11 kv vcb panels, a) male / female contacts mei make, b) 11 kv pt fuse, c) 11 kv vcb bottle assembly bracket, d) shower contact mei make, e) shower contact crompton greaves make, spring charging dc motor for 11 kv vcb panel( make delco), tripping coil suitable for vcb panels (operating voltage 30-36 volt dc) with plunger, ampere meter 96mm x 96 mm for 11 kv vcb panel (digital), voltmeter 96mm x 96 mm for 11 kv vcb panel (digital), indicator lamp for vcb panel voltage 50-250 v ac/dc., tnc switch for 11 kv/ 33kv vcb panels, space heaters with thermostat for 11 kv vcb panels, 11 kv vacuum interupter bottle with makes, a) g.e., b) crompton greaves, c) allind, d) alstrom, e) bhel /a.b.b, master trip relay ashida (make) 18-52 (v), 11 kv cts resin cast of different ratios, make mei/ bicco lawrie / crompton greaves / bhel/ er/ ssg/ alstorm/ megawin/ sudhir/electricfield for 11 kv vcb panels(indoor/outdoor), i) 800/400/