Latest electrical holder Tenders | Government electrical holder Tenders

State Government

CTN :45287658

05 Jun, 2026 7.05 Crore

Godda - Jharkhand

Tender For fabrication, erection and commissioning of new 2 nos. u/s and 5 nos. service gates of head works with hoisting arrangement, embedded part, electrical accessories and other components of gates and stairs, hoisting shed, d.g. set with shed of tardiha

Central Government/Public Sector

CTN :45293229

30 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of rinsing pump pump type tc 160/430 (with mandatory electrical components) hsn code: 84138190. , vacuum pump pump type asc0415-1mt161-6 (with mandatory electrical components) hsn code: 84138190. , suction pump horizontal end-suction pump, type sbg 801 mv (with mandatory electrical components) hsn

corporations/Associations/Others

CTN :45178717

25 May, 2026 5.46 Lacs

Bhiwadi - Rajasthan

Tender For operation and maintenance of street light with material at i/a iid centre khuhskhera - contract for operation and maintenance of street light(led fixtures)with material on various roads at industrial area iid centre khushkhera as per enclosed term and conditions the scope of work includes operation & maintenance of street lights , on & off street lights , electrical panels , repair of lights with all required materials , replacements of necessary electrical components ,cable etc. including excavation for cable & maintaining the light good condition as per enclosed term and conditions,led fixtures 80-90 watt at i/a iid centre khushkhera, contract for operation and maintenance of high mast (led fixtures) with material as per enclosed terms and conditions. the scope of work includes operation and maintenance of high mast lights, on and off high mast lights, electrical panel, repair of lights with all required materials, replacements of necessary electrical components, cable etc including excavation for cable and maintaining the light good condition as per enclosed terms and conditions.

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

State Government

CTN :45287367

25 May, 2026 1.97 Lacs

Multi City - Telangana

Tender For operation and maintenance pjp maintenance of electrical components on hoist equipment of 62 nos radial crest gates of pjp dam, revulapally, dharoor, jogulamba gadwal district

CTN :45266226

27 May, 2026 NA

Sitapur - Uttar Pradesh

Tender For within the jurisdiction of the electricity distribution division, sitapur, the scope of work entails the mechanical overhauling of 11 kv vcbs (e.g., repairing/replacing components such as roller bearings, charging strips, charging pins, trip coils, male/female contacts, charging gears, bushings, double pins, charging springs, etc.) and the electrical overhauling of 11 kv vcbs (e.g., repairing/replacing components such as control cables/wiring, tripping coils, auxiliary switches, selector switches, and all associated wiring work related to metering and protection systems). this work is to be executed within the jurisdiction of the etd, sitapur.

CTN :45266262

27 May, 2026 NA

Sitapur - Uttar Pradesh

Tender For within the jurisdiction of the electricity distribution division, mahmudabad (sitapur), the scope of work involves the mechanical overhauling of 11 kv vcbs—specifically, the repair and replacement of necessary components such as roller bearings, charging strips, charging pins, trip coils, male/female contacts, charging gears, bushings, double pins, charging springs, etc.—as well as the electrical overhauling of 11 kv vcbs—specifically, the repair and replacement of necessary components such as control cables/wiring, tripping coils, auxiliary switches, selector switches, etc., along with all wiring-related works for metering and protection systems—all to be executed within the jurisdiction of the etd, sitapur.

CTN :45289352

28 May, 2026 1.79 Lacs

Chandigarh - Chandigarh

Tender For repair and maintenance of leakage of various water supply valves including rewinding of pumps/ motors and various electrical components etc at boosting station at block-a,b,c,d and l under gmch-32, chandigarh

CTN :44989585

25 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and installation of training items for drone technician trade under craftsman training scheme (cts) at consignee locations - pliers, soldering station, multi meter, binoculars, anemometer, magnifier, unassembled drone kit, unassembled drone kit - standard with hd camera & thermal camera, electricity lab, smd technology kit with wall chart, dc regulated variable programmable dc power supply, drone workbench, analog-digital circuits development platform, applied mechanics training platform, drone battery management training systems, charge controller training system, bldc (brushless dc) motor training system, inverted pendulum, drone sensor trainer kit, antenna training system, advanced microwave integrated circuit lab, gps training platform, wireless communication modules, fcb and esc training platform, drone gimbal set with motor and control, npnt compliant micro uav built for mapping and surveillance, field repair kits, drones and spare parts kit, balance charger, power distribution board, laptop latest configuration, thrust measurement meter, indoor netted facility, outdoor controlled netted testing facility, various electronic and electrical components, 3d printer, drone ( long range)

Electrical Holder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government