Latest electrical insulation Tenders | Government electrical insulation Tenders

State Government

CTN :40773800

02 Jul, 2025 96.6 Thousand

Raisen - Madhya Pradesh

Tender For corrigendum : estimate for installation additional 1x63 kva dtr at village karmodiya under kharwai dc o n m div raisen - back filling of poles with boulders., bi-metallic clamps suitable for 12mm dia stud and 80sqmm aaac, bi-metallic clamps distribution transformers bushing, l.t. distribution box with isolator on incoming with hrc fuse for 63 kva dtr (200 amp. isolator & 6 sp of 60 amp.), three phase static energy meters 20-80 amps.with l.s. & tod facility with box, single phase service connection box (deep drwan metal service connection boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-, three phase service connection box(deep drwan metal service connection boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-, anti climbing devices ( barbed wire 2.24 mm dia, 14 swg), stay wire 7/3.15 mm.(7/10 swg), g.i.pipe 40 mm dia c grade type, earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire, galvanized nut & bolt with washer, earthing for pcc pole 4.00 mm-8 swg g.i wire- 0.8 kg, per pole, m.s.nuts with bolts, lt a.b cable tension clamps (galvanized), lt a b cable suspension clamps (galvanized), clamps for neutral for ab cable, piercing connector type-i for single/three phase (main 16-50 sqmm tap-off 16-50 sqmm), piercing connector type-ii (main 16-50 sqmm tap-off 16-50 sqmm), back clamp for 140 kg pcc pole ms flat 50x6 mm, clamp for 140 kg pcc pole ms flat 50x6 mm, stay set complete without stay wire 16 mm. (painted), danger boards enamelled 11 kv, shackle insulators 90x75 mm., stay insulators 90x65mm, 11 kv pin insulator polymer composit (5 kn), 11 kv(45kn) composite polymer disc insulators, red oxide paint, aluminium paint, concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay, complete jumpering of dtr, concreting of structures & foundation (1:3:6), g.i. strip 25x3 mm1, stone block/pre cast block for base pedding(450x450x75mm), bentonite compound powder, gst on material @ 18 %, labour charges including gst @ 18%, transportation charges including gst @ 5%

corporations/Associations/Others

CTN :40909357

10 Jul, 2025 76.46 Lacs

Jodhpur - Rajasthan

Tender For 11 kv composite polymer pin insulator

CTN :40746104

02 Jul, 2025 NA

Pulwama - Jammu And Kashmir

Tender For annual rate contract for the year 2025-26 - supply, installation, testing & commissioning of 11/0.433kv, 25 kva 3-phase distribution transformers with bimetallic terminal connectors energy level-2, aluminium wound, and with lv cable box having detachable aluminium gland plate with lv bimetallic terminal connection suitable for vertical take off of cable., supply, installation, testing & commissioning of 11/0.433kv, 3-phase, 63kva distribution transformer with bimetallic terminal connectors energy level-2, aluminium wound , and with lv cable box having detachable aluminium gland plate. transformer should have arrangement for vertical take off, supply, installation, testing & commissioning of 11/0.433kv, 3-phase, 100kva distribution transformer with bimetallic terminal connectors energy level-2, aluminium wound , and with lv cable box having detachable aluminium gland plate. transformer should have arrangement for vertical take off, supply, installation, testing & commissioning of 11/0.433kv, 3-phase, 200kva distribution transformer with bimetallic terminal connectors energy level-2, aluminium wound , and with lv cable box having detachable aluminium gland plate. transformer should have arrangement for vertical take off, supply, installation, testing & commissioning of 11/0.433kv, 3-phase, 250kva distribution transformer with bimetallic terminal connectors energy level-2, aluminium wound , and with lv cable box having detachable aluminium gland plate. transformer should have arrangement for vertical take off, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., providing of earthing complete by gi pipe/ gi rod 40 mm 3 mtr long through gi strip 25x3 mm as per rec standards., supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminum paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminum paint) inscribed with permanent marking on each pole "name of scheme-2024-25/xx" (xx mean pole numbers say 01, 02...) in white paint in background of green paint at conspicuous place. the paint shall have to be sprayed not brushed., sitc of gi channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc. fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., sitc of 11kv polymeric composite pin insulator 12kv, 5kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, sitc of 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm with fitting, providing & fixing of mucki clamps/lt shackles with insulators, providing & fixing of 11 kv horn gap fuse set 3 phase 200a, providing & fixing of 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, providing & fixing of 11kv gapless surge arrestor, 9 kv ,10 ka, la with polymer housing, stn. type, providing & fixing of lt fuse set, providing & fixing of single core aluminum (al.) lt power cable (1.1 kv grade) 300 mm sq cross section un-armored xlpe cable with thermoplastic tape inner sheath from the lt bushes upto the overhead lt bare conductor., providing & fixing of single core aluminum (al.) lt power cable (1.1 kv grade) 185 mm sq cross section un-armored xlpe cable with thermoplastic tape inner sheath from the lt bushes upto the overhead lt bare conductor., providing & fixing of single core aluminum (al.

State Government

CTN :40896111

29 Jul, 2025 83.62 Lacs

Parganas - West Bengal

Tender For manufacture, testing, supply and delivery of 11kv polymer post insulator

CTN :40883615

04 Jul, 2025 NA

Kanchipuram - Tamil Nadu

Tender For purchase of electrical items - high-grade porcelain/ceramic heavy-duty industrial pendant holder suitable for a type of bc (bayonet cap) with pin-type contacts, surya make:-, high bay industrial light led for industrial application. model - sle hb 200w hilios, floodlight- led for industrial application model - sle fl 250w ip66 hilios, streetlight bottom openable with glass- led. model- sle ul 120w ip66 lxn, make: crompton/philips/havells/bajaj, 40-60 w fluorescent tube light starter, suitable for 230v ac operation with reliable ignition, 230v, 100w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and long-lasting performance., 230v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, efficient lighting, and extended service life., 24v, 60w bc (bayonet cap) pin-type incandescent bulb, clear glass, high illumination, and durable performance, 4-foot, 36w fluorescent tube light, cool white, high luminous efficiency, and standard t8/t12 size, 22 watts, batten type, 4 feet led tube light - make: isi standard, tube light side holder, old model, compatible with 4-foot fluorescent tubes., 3/4 inch wide pvc insulation tape, flame-retardant, moisture-resistant, and suitable for electrical insulation-10 mtrs roll, 1-inch wide fiber glass tape, high-temperature resistant, non-conductive & suitable for electrical insulation and cable wrapping 50 mtrs roll, 250 w, mercury vapour lamp, screw type, clear / coated, 230 v ac., 50 hz., standard base (e27/e40), suitable for outdoor/indoor lighting applications., 250 w magnetic ballast, designed for mercury vapour lamp, 230 v ac., 50 hz, ensuring stable lamp operation and ignition., ignitor for 250 w metal halide lamp, suitable for 230 v ac., 50 hz supply

CTN :40187752

10 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of h nut m10 2 , washer 3 , h screw m8 40 4 , washer m10 5 , washer m8 7 , washer m12 8 , z washer 160hv 9 , locktab 10 , lock washer m8 11 , lock washer 12 , h screw m10 25 13 , schnorr washer 14 , o ring 16 , o ring 19 , o ring 20 , insulator 21 , ball bearing 22 , h screw m6 18 23 , h screw m6 25 24 , h screw m8 20 25 , h screw m8 22 26 , h screw m6 18 27 , h screw m10 25 28 , set of nut locking 29 , loctite 243 nut lock 31 , washer 32 , o ring 33 , centering pin 39 , diode sector 40 , ring n305 d nom m10 41 , direct diode 42 , reverser diode 43 , ballast resistor 44 , set of rectifier cowl seals 45 , gasket 49 , nozzle 51 , locktab 58 , locktab 59 , centering pin 60 , screw 61 , centering pin 63 , stop pin 64 , double locktab 65 , stop ring 66 , nut 67 , double locktab 68 , double locktab 69 , double locktab 70 , double locktab 71 , double locktab 72 , locktab 73 , screw 74 , centering pin 75 , shear washer 76 , gasket 77 , compressor nose 78 , schnorr washer 79 , fuse plug 160 80 , lock washer 81 , adjusting shim 82 , double locktab 83 , double locktab 84 , impeller nut 85 , pin 86 , stop ring 87 , washer m5 88 , washer 89 , washer 90 , lock tab 91 , washer 92 , lock washer 93 , centering pin 94 , stop ring 95 , stop ring 96 , gasket 97 , bush 98 , seal piston o ring 99 , seal piston 100 , bearing piston 101 , washer 102 , cylinder o ring 103 , shaft bush 104 , pin 105 , snap ring 106 , washer z18 107 , cotter pin m 12 15 109 , washer 111 , gaflex metal torus 113 , washer 114 , washer 115 , locking screw 116 , washer 117 , washer 118 , gaflex seat 119 , esn nut 120 , washer 122 , washers 123 , washer 124 , washer 125 , o ring 126 , o ring 127 , washer 128 , industry lithium button cell 3v 48mah 2 5mmx12 5mm 131 , gasket 132 , circlips 133 , back up battery for supervision monitor mp270 134 , seal and friction washer 135 , seat 136 , lock washer 137 , o ring nitrile 138 , ring ptfe guide 139 , upper bearing polymer 140 , o ring upper nitrile 141 , spacer ring upper polymer 142 , steel pin 143 , o ring nitrile 144 , spring retaining ring upper s steel 145 , upper support washer 146 , spacer ring lower polymer 147 , lower bearing polymer 148 , guide ring polymer 149 , o ring lower 150 , lower support washer chemical resistant polymer 151 , spring retaining ring lower s steel 152 , nitrile seal 153 , nitrile seal 154 , ring nitrile galvanized steel 155 , nitrile seal 156 , o ring nitrile 157 , spring s steel 158 , washer m20 159 , gasket 59x69x3 4 161 , dilatation absorber for diesel engines exhaust pipe 162 , spring washer s steel 316 163 , bearings nylon tfe 164 , ring tfe aft 165 , connection seal tfe 166 , viton rod gland 167 , seat series 7644 nylatron 168 , seat ring viton 169 , ring nylatron stop 170 , seals kit bv htb dn65 fb 171 , gasket 55x43x2mm 172 , bypass valve p3h p1 dn50 173 , tapered spring 174 , valve spring 175 , spring pin e5x50 176 , o ring 29 74x3 53 an22 nbr 80sh 177 , filter element f1547 a 178 , actuator 179 , maintenance kit 180 , shouldered ring 181 , fixation ring 182 , fixation plates 183 , o ring 47 35x1 78 64c8 184 , diaphragm 185 , gasket 186 , counter weight 187

State Government

CTN :40858997

29 Jul, 2025 NA

Parganas - West Bengal

Tender For manufacture, testing, supply and delivery of polymer insulator

Central Government/Public Sector

CTN :40866615

09 Jul, 2025 NA

Avadi - Tamil Nadu

Tender For supply of cotton selvedge tape (white), width 25mm x thick 0.2 mm (in rolls of 50 metr es) variety no.10 to is.1923/2003 type -2 for electrical insulation purpose. [ warranty peri od: 30 months after the date of delivery ]

CTN :40843279

05 Jul, 2025 4.86 Lacs

Ramgarh - Jharkhand

Tender For supply of tools kit d d - rotery barel pump , d spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , adjustable spanner slide wrench , 12point7mm squre drive socket set , allen key long ball point set , 12inch hacksaw frame square , hacksaw blade hss all hard 300mm , digital lux meter range 20-2000 lux , insulated combination plier , adjustable screw driver set , blow tourch with 5kg cylinder and nozzle , cotton tape 1inchx50m , empire tape 3by4inch 20m roll yellow , pvc self adhesive electrical insulation tape 3by4inc , ht rubber tape 1x10mtr , line tester length of blade 200mm , digital line tester length 130mm , digital earth resistance tester with all standard and optional accessories , hand driven insulation tester meggar , digital insulation tester , digital ac clamp meter jaw opening 30mm , hammer with handle 1kg , heavy duty electric hand grinder tool set 240v , bearing rope pulley block 4inch , non contact high voltage detector , heavy duty pipe wrench length 450mm , slide wrench 12inch , hydraulic crimpling tool 10-300sqmm , heavy duty pipe wrench length 300mm , heavy duty pipe wrench length 600mm , insulated screw driver 08inch blade dia 8mm , insulated screw driver 10inch blade dia 5mm , rind spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , bearing puller size 8 , mild steel chain pulley block geared 5 ton 6mtr load chain , tirfor 8tonn rope lenth 20m body matreial alloy steel , electrician tool kit

CTN :40823136

11 Jul, 2025 2.00 Crore

Doda - Jammu And Kashmir

Tender For supply and testing of major safety and testing equipments. - supply and testing of major safety and testing equipments, digital multimeter (make fluke, mastech), battery specific gravity tester digital, ir tester ( make meggar) 5kv, digital bdv oil test kit (100kv) (make meggar), dc earth fault locator (make meggar), transformer winding resistance meter (make meggar), transformer turn ratio meter (make meggar), thermovision camera low end (make meggar,fluke,bosch), tan delta and capacitance measurement kit. the test set shall be fully automatic, microprocessor based and designed for condition assessment of electrical insulation in high voltage apparatuses such as transformer, reactor, bushings, cts, cvts/pts, circuit breakers, rotating machines etc. with output upto 12kv at frequency 45hz...400hz, output test current @ 12kv:100ma continuous and 300ma intermittent or better. along with test lead and accessories and transport case with wheels.(make meggar), primary current injection test kit upto 1000a (make meggar), oil filteration plant 6000 lhp,multistage (make nach,cbs,cee dee rayon), digital earth resistance meter (make meggar), arc flash/electric insulation suit, co2 fire extinguisher 9 kg class c (life span of not less than 15 years)

Electrical Insulation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector