Get complete information related to latest Electrical Line Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electrical Line Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electrical Line Item Tenders.
Tender For supply of brake pedal assembly p no fw43620 , brake shaft spring p no je050101 , left brake assembly p no 018409 , right brake assembly p no 018410 , rear brake wheel cylinder assembly p no 012626 , shoe return spring p no 011880 , cylinder end shoe return spring p no 011879 , master cylinder assembly p no 012682 , tube brake assembly p no 011785 , hose brake flexible p no 012630 , tube brake assembly mas cyl to tee p no 011637 , steering gear mounting assembly p no fw43614 , steering connecting rod assembly p no fw31008 , steering tie rod assembly p no fw31009 , wheel tyre assembly p no fw31015 , stub bush for axle pin p no mt41620002 , tie rod socket left assembly p no jm010936 , tie rod socket right assembly p no jm010937 , propeller shaft assembly p no fw42934 , love joy coupling sw 100 p no fw3168409 , carbon brush p no je070002 , brush holder p.no.je070025 , universal joint journal kit p no jm906929 , chopper control panel assembly 36v p no fw31336 for josts make 2 ton capacity battery operated 4 wheeler platform truck , 160a fuse for josts make eje 20 electric pallet truck part no ec190244 , foot pedal assembly p no fw190208 , brake tube accessories for 3 ton capacity of josts make electric platform truck part no fw43143 , dc chopper control panel assembly 36 v for 3 ton capacity of josts make electric platform truck part no je181200 , speed controller for 3 ton capacity of josts make electric platform truck part no je190230 , contactor with double coil for 3 ton capacity of josts make 4 wheel electric platform truck part no je181504 , battery connector for 3 ton capacity of josts make electric platform truck part no je190231 * /bid number : gem/2026/b/7450842 + /dated: 11-06-2026 ' ' / bid document 1 / 25
Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov
Tender For rate contract for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for year 2026-27 or till the next year tender is finalized - supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote (per unit rate), super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-19 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-14 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal
Tender For supply of spares for 100kn servo electric utms - limit switch for kappa 100ss-cf, p/n z108.057, limit switch for hydraulic adjustment, p/n z108.078, remote control for setting up inching operation, p/n mp02489, usc module kappa, universal measurement amplifier, for connecting resistive and inductive bridge sensors, choice of ac/dc power supply, 4 and 6-conductor technology, 24-bit calculated resolution, module occupies one module bus slot, p/n mp00525, insulation end disc half, ultiform uvs 144, p/n z551.004-014, heating element kanthal apm, id 5 in, length 4in, fur 1250 °c p/n z906.072, furnace insulation vertical plate, p/n z551.004-010, furnace thermocouple type s for 5" furnace incl. compensating cables, p/n z551.034, solid state relais 30a/660v for ht-controller 1200°c p/n 930.ssm1a130bd, moving iron instrument 0...5a/10a, p/n 930.eq48, power supply 24 v, p/n 930.2868635, contactor tesys 7.5 kw, p/n 930.lc1d18bl, extension cable hiperface for tcii, p/n 977.066342, external power supply 48v/10a, p/n z240.054-011
Tender For 32 amps power contactor suitable for ac application, contact voltage 480 v ac, 3 pole, auxiliary contacts 2 no + 2 nc, coil voltage 240 v ac, din rail / screw mounting type, conforming to is/iec: 60947-4-1. accepted makes: abb, l&t, siemens, c&s, bch, havells, schneider electric, standard only. the supplier shall submit valid proof of being oem or authorised dealer/distributor of the offered make. in case of authorised dealers/distributors, valid oem authorisation certificate along with proof of purchase/procurement from oem or authorised channel partner shall be submitted along with supply. material shall bear manufacturer name, model and rating details. manufacturer?s test certificate and test report from central government/nabl/ilac accredited laboratory shall also be submitted along with the material supply. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , capacitors for electric fan motors as per is 1709 (v2) (q3) , elecric bells and accessories as per is 2268 (q3) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , miniature circuit breaker boards for voltages conforming to is 13032 (q3) , non modular piano type domestic fan regulator conforming to is 11037 (q3) , non modular piano type domestic electrical sockets isi marked to is 1293 (q2) , modular piano type domestic electrical switches isi marked to is 3854 (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , cable of size 2 core 0.75 sqmm twisted 90mtr roll , casing caping pvc 20mm , dol starter 1000 watt , holder angle insulated , inverter based led bulb 12 watt , inverter based led bulb 9 watt , led tubelight 18 watt , led tubelight 20 watt , power contactor 3 pole 110 amp , power contactor 3 mn x 25 , socket outlet 6 amp modular , solar street light 30 watt lumen led output 120 lumen per watt , solar street light 45 watt lumen led output 175 lumen per watt , starter for 7point5 hp submersible pump , switch socket combination 16 amps , switch socket combination 6 amps , switch socket combination 6oblique16 amps , tape insulation pvc , timer switch light sensor type nature switches three phase * /bid number : gem/2026/b/7552142 + /dated: 06-06-2026 ' ' / bid document 1 / 42
Tender For supply of siemens point contactor unit group relay, non-ac immune, plug in type, working over 24v dc and capable of controlling electric point machine operating on 110 v dc conforming to irs:s-46or latest, irs:s-34 or latest & irs:s-23 or latest. the unit shall consist of n/r relay (double wound dc neutral line relay), xr relay (dc neutral relay). w(n) r/w (r)/r mechanically interlocked relay & wcr (heavy dutycontractor relay with 16 amperes breaking capacity). all the above relays shall be mounted on pre-wired base plate. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of set plug sckt motor side sdl , contactor power 550v 3p 525 550v 225a 2no , kit contact l and t ml10 spare , contactor ml10 2no 2nc 550v ac , adhesive hardener dobefil 60 , adhesive hardener 758 , cleaner electric cmpnnt crc 226 , brush carbon 50x32x25mm , relay contrrl plt 12v dc 8 pin with bse , contactor pak150us 525vac , set plug socket gt end box side sdl , bolt alln ht full m24 130mm w nut , bolt alln ht half 3 by 4in x 3in with nut sr wsr , bolt hex ms 4.6 full 5 by 8inx8in with nut , bolt hex ms 4.6 full 3 by 8inx2in with nut , bolt hex ms 4.6 full 3 by 8inx 1.5 in with nut , coupling f140 tyre , bar rnd cu 12mm is 613 , bend pipe ms 90deg 100mm , bend pipe ms 90deg 150mm , flange ms 200mm pln face , flange ms 150mm pln face , kit tool fttr with all wrench handle screw driver
Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.