Latest electrical mat Tenders | Government electrical mat Tenders

Corporations/Associations/Others

CTN :45526103

23 Jun, 2026 NA

Trimbak - Maharashtra

Tender For supply and installation of electrical material and repairing, rewinding of motor pumps required and supply of material for daily repair works of water supply pipe line and pumps on for daily repair works of water supply on yearly basis

State Government

CTN :45519882

18 Jun, 2026 NA

Pune - Maharashtra

Tender For supplying electrical materials and repair maintenance services at. grampanchayat chimbali. - electrical material, supplying and erecting modular type switch6a / 10a ., supplying and erecting street light bracket for erection ofsingle fitting made from 40 mm. dia b class g.i. pipe 1.0 m in length along with pole cap of 300 mm length 100 mm dia duly welded ., providing cement concrete foundation including excavationfor the poles 60 cm x 60 cm x 1.5 m deep in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm/45 cm dia. x 45 cm height plinth duly plastered and with necessary curing and finishing in an approved manner.(for 8.5 to 9 m poles), supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm. dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75m) length respectively and total 8 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2m ) length respectively and total 9 m long with pole cap, base plate in provided foundation., supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm dia. with 4.5 x4.5 x3.65 mm thickness (5.60 + 2.7 + 2.7 m) length total 11 m long with pole cap, base plate in provided foundation ., supplying and erecting street light bracket made from 25mm. dia b class g.i. pipe, 0.6m. in lengthalong with polecap of 300 mm length and 80 mm dia duly welded with provided leads as per specification, supplying,tpmcb 40a to 63a in provided distribution board, providing pair of duly tested rubber hand gloves as per is:4770 suitable for working upto 22kv supply., supplying and erecting insulated d.p. switch surface type/flush type 32a 240vwith indicator lamp & fuse, supplying h.c. pattern porcelain fuse bridge swith base & hc type fuse links240v 32a, supplying and erecting programmable digital almanactimer microcontroller based with real time clock to operate on derived switching on & switching off street light as per daily sunset and sunrise respectively, 1.25 mm crca sheet metal enclosures with 20a., supplying pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper industrial cable ., supplying and erecting led street light fitting suitable for 60w lamp, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink ., supplying and erectingled street light fitting suitable for 26w to 36w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erectingled street light fitting suitable for 90 w led street light, including lamp, with pf > 0.95 class ip 65 and above housing of pressure die cast alluminium alloy and heat sink., supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95,class ip 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium ., supplying & laying pvc armoured cable 4core 6sq mm, supplying & laying pvc armoured cable 4core 10 sq mm, supplying & laying pvc armoured cable 2core 10 sq mm, supplying & laying pvc armoured cable 4core 16 sq mm, supplying, erecting & marking spmcb 6a to 32a, b- series (for lighting), supplying, erecting & marking dpmcb 6 a to 32 a bseries (for lighting), supplying, erecting & marking tpmcb 6 a to 32amp ., supplying, erecting & marking fpmcb 40a to 63a ., supplying & erecting crimping type aluminium lugs for cable upto 16 sq mm., supplying & erecting crimping type coper lugs for cable upto 1.5 to 6sq mm., supplying and erecting two pole power contactor 250v 32a for time switch complete erected on wooden block/provided box, with necessary materials., supplying & erecting mains with2x1.5 sq.mm f.r copperpvc insulated wire laid in provided conduit/trunking/inside pole 1-3-3, supplying and e

State Government

CTN :45510990

16 Jun, 2026 NA

Saoner - Maharashtra

Tender For supply of electrical material at gp/waghoda/zp/ngp/tender no1/2026-27/2nd call

State Government

CTN :45523942

22 Jun, 2026 NA

Khopoli - Maharashtra

Tender For supply of electrical materials for vp-vadval tal khalapur

State Government

CTN :45521595

18 Jun, 2026 NA

Calicut - Kerala

Tender For work "supply of electrical materials/ stores pedestal fan -25 nos, exhaust fan (450mm, 18" heavy duty) crompton or equivalent -10 nos

State Government

CTN :45315676

29 Jun, 2026 13.77 Crore

Bengaluru - Karnataka

Tender For corrigendum : establishing 2x12.5 mva, 66/11kv sub-station at kalathmadu along with construction of proposed 66kv lilo line from the existing 66kv virajapete- ponnampete sc line on dc towers to proposed 66/11kv sub station at kalathmadu for a distance of 1.925km in virajpete taluk, kodagu district on partial turnkey basis including supply of all matching materials/equipments (excluding supply of 2x12.5mva 66/11kv power transformers and 11 kv switchgear) and erection (including civil works) of all materials/equipments, testing and commissioning - on load tap changer , control and relay panels, , circuit breakers, , 11kv mcvcbs & pcvcbs, , tower parts and all types of station structures with bolts, nuts and washers, , i beams & m.s channels, , lightning arrestors, , isolators, , insulators, , instrument transformers, , battery sets, , battery charger, , acsr conductors, , ground wire, , 11kv ug cable, , 1.1kv copper control cables & lt power cables, , capacitor bank, , hardware for insulator, conductor and ground wire:, , tension & suspension clamps and connectors., , accessories for conductor and ground wire:, , p.g clamps. m.s.c joints, pre-formed rods, repair sleeves, vibration damper etc., , c-type fire wedge connectors, , i) grounding materials (g.i flat, m.s flat etc.,), , il)grounding materials (c.i pipes), , ltac & dcdb panel, , 11kv termination & jointing kits, , class, , nitrogen injection fire protection, , system, , rigid tubular aluminium bus bars, aluminium clamps and connectors., , wave traps/line traps, , plcc equipment

State Government

CTN :45465130

17 Jun, 2026 4.20 Lacs

Ananthapur - Andhra Pradesh

Tender For corrigendum : supply of electrical materials & water supply materials to electrical and water works section for regular day to day maintenance. - zero watts bulb, wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments for 4 sqmm., wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments for 1.5 sqmm., wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694:confirming to latest amendments for 1 sqmm., wiring for lighting/power circuit using one of frls pvc insulated 1100v grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified is-694 : confirming to latest amendments for 2.5 sqmm., towards supply of serial lights for occassional use for offics ibs, tafflon tape, supplyingof .....feet-pvcbattenwith integratedledtube ....w withhigh quality diffuserwithlifeof25000 burninghours&70% lumen maintenance with cri > 80. power input: 220-240v@50/60hz&power factor >0.9 alongwithce approved. 2 years warrantyagainst anymanufacturingdefectworkingunder standard electrical condition. led light fitting 1 x 4' - 20/22 w, supplying of special moulded variety pvc tee as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 32mm dia pvc tee., supplying of special moulded variety pvc tee as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 25mm dia pvc tee., supplying of special moulded variety pvc service saddles as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 32mm dia pvc service saddles., supplying of special moulded variety pvc service saddles as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 25mm dia pvc service saddles., supplying of special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 32mm dia pvc reducer., supplying of special moulded variety pvc reducer as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 25mm dia pvc reducer., supplying of special moulded variety pvc elbows as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 32mm dia pvc elbows., supplying of special moulded variety pvc elbows as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 25mm dia pvc elbows., supplying of special moulded variety pvc bends as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 32mm dia pvc bend., supplying of special moulded variety pvc bends as per is 7834/ 1987 and fabricated as per ig124/ 1984 with isi mark and with its latest amendments to walk site etc complete for : 25mm dia pvc bend., supplying of 20 mm dia pvc tap, supplying of 20 mm dia pvc mta, supplying of 20 mm dia pvc fta, supplying of 20 mm dia pvc elbow, supplying of 20 mm dia pvc coupler, supplying of 20 mm dia pvc bend, supplying of 15 mm dia pvc tap, supplying of 15 mm dia pvc mta, supplying of 15 mm dia pvc fta, supplying of 15 mm dia pvc elbow, supplying of 15 mm

State Government

CTN :45465163

17 Jun, 2026 8.41 Lacs

Ananthapur - Andhra Pradesh

Tender For corrigendum : providing and installing electrical materials, rgb lights, renovation of high mast lights and renovation of cctv cameras & led tb under garden unit, tb dam

Corporations And Associations And Others

CTN :45234484

19 Jun, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : electrical material

CTN :45531705

22 Jun, 2026 1.30 Lacs

Chandigarh - Chandigarh

Tender For maintenance of electrical installation in non residential building at chandigarh. (repair and servicing of ht vcb, lt equipment installed in 11 kv indoor substation at civil hospital sector-45, chandigarh).

Electrical Mat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors