Latest electrical pole scrap Tenders | Government electrical pole scrap Tenders

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

State Government

CTN :45282107

15 Jun, 2026 63.00 Lacs

Patti - Punjab

Tender For corrigendum : supply of supply of 11 kv v type cross arm clamp , supply of 3 phase dis. box clamp with nut and bolts , supply of connecting cable , supply of l.t. fuse set protection box , supply of tinned copper fuse wire different size , supply of hdpe pipe , supply of stone pad , supply of holding clamp , supply of ms angle , supply of t-off chhanel , supply of top chhanel 125x65x240 , supply of dropper channel 100x50x2028 mm. , supply of danger board with clamp and nut and bolt , supply of g.i. patti clamp nut and bolts , supply of l.t. tail less unit , supply of copper l-pieace , supply of 11 kv f clamp , supply of suspension clamp , supply of dead end clamp , supply of eye i hook , supply of eye bolts for guarding , supply of j hook , supply of lt clamp , supply of pearcing connector , supply of alluminium lug 120 sq.mm. , supply of alluminium lug 240 sq.mm. , supply of alluminium lug 70 sq.mm. , supply of nut bolts and washers off size , supply of guarding angel , supply of guarding angel clamp , supply of m.s. angel iron 65x65x6 mm. , carriage of 9 m stp pole-sp- 55 galvanised , carriage of 11 m stp pole-sp- 55 galvanised , carriage of 8.5 m pcc pole , carriage of v type cross arm for 11 kv , carriage of 11 kv pin insulator with pin , carriage of disc insulator with fitting t and c 45 kn , carriage of 11 kv fuse set , carriage of 11 kv tpmo with polymer insulator , carriage of complete stay , carriage of distribution transformer 25 kva , carriage of distribution transformer 63 kva , carriage of distribution transformer 100 kva , carriage of distribution transformer 250 kva , carriage of acsr dog conductor , carriage of acsr weasel conductor , carriage of m s earthing rod 20 x2540 mm , carriage of lt al. xlpe cable size 1x240 sq.mm. , carriage of lt pvc cable 1x120 sq.mm. for dtr , carriage of lt pvc armoured cable size 3.5x70 or 35 sq.mm. , carriage of 11 ) /bid number : gem/2026/b/7551524 * /dated: 20-05-2026 & & / bid document 1 / 54 kv xlpe cable 3x185 sq.mm. , carriage of lt ab cable 3x120 sq.mm. , carriage of lt ab cable 3x50 sq.mm. , carriage of lt ab cable 3x95 sq.mm. , carriage of lt pvc armoured cable size 4x25 sq.mm. , carriage of 33 kv xlpe cable 3x300 sq.mm. , carriage of 33 kv indoor or outdoor jointing kit , carriage of 11 kv indoor or outdoor jointing kit , carriage of 33 kv straight through , carriage of 11 kv straight through size 3x185 sq.mm. , carriage of 11 kv vcb , carriage of g.i. wire 6 or 8 swg for guarding , carriage of three phase distribution box , erection of l.t. fuse set protection box , execution of chemical earthing with g.i. patti clamp nut and bolts , execution of pipe earthing with g.i. patti clamp nut and bolts , erection of l.t. tail less unit with all respective material , laying of acsr dog conductor , laying of acsr weasel conductor , laying of lt ab cable 3x120 sq.mm. , laying of lt ab cable 3x50 sq.mm. , laying of lt ab cable 3x95 sq.mm. , mounting of 3 phase distribution box , erection of double pole structure , erection of single pole structure , grouting of pcc or stp pole , grouting of stay , earthing of pole , guarding of 11 kv line , fencing of distribution transformers , plinth work , installation of transformers 11 or 0.4 kv t or f 25 kva , installation of transformers 11 or 0.4 kv t or f 63 kva , installation of transformers 11 or 0.4 kv t or f 100 kva , installation of transformers 11 or 0.4 kv t or f 250 kva , laying of cable 11 kv xlpe cable 3x185 sq.mm. , laying of cable 33 kv xlpe cable 3x300 sq.mm. , installation of 33 kv indoor or outdoor jointing kit , installation of 11 kv indoor or outdoor jointing kit , installation of 33 kv straight through , installation of 11 kv straight through , installation of 11 kv vcb , dismentlling of jarjar g.i. wire and weasel conducter , received back of distribution transformer

State Government

CTN :45260557

15 Jun, 2026 56.51 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of pcc pole 8 and half meter , carriage and erection of lt xlpe cable al 3 and half into 400 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 50 plus 1 into 35 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500 mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting tandc type 45 kn , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating stay , supply and carriage and erection of danger board , supply and carriage and erection of barbed wire including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of al leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240 mm , supply and carriage and erection of ms channel 125 into 65 into 1300 mm toff , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sqmm , supply and carriage and erection of lt pvc cable 3 and half into 70 by 35 sqmm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm with clamp and bolt and nut , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with n and b , supply and carriage and erection of pg clamp , dismantling and removal of existing 100 kva transformer oid and used , dismantling and removal of existing 16 kva transformer oid and used

CTN :45511957

22 Jun, 2026 3.00 Lacs

Nainital - Uttarakhand

Tender For tender for vertical frame poles 129, 1.5 x 1.5 inch height 06 feet above ground level fixed vertically at an 7ft interval each pole grouted 1.5 feet below the ground level with cement concrete and aggregates , horizontal frame pole 03 x ms square pipe of 1 x 1 inch horizontally welded between vertical pole distance 02 ft interval total 2700 ft , fiber sheet cladding 0.3mm thick height 5 ft and fixed 01 ft above the ground level total 4500 sqft cladded with self driven screw distance 08 inch interval in 03 horizontal pole , painting of frame with primer , painting of frame with black green rust resistant enamel paint

CTN :45521875

22 Jun, 2026 NA

Kota - Rajasthan

Tender For supply cable 70 sqmm x 3 point 5 core alumunium , supply 16 sqmm x 3 point 5 core alumunium , supply 1 point 5 sqmm x 3 point 5 core copper , supply 4 sqmm x 3 point 5 core copper , supply 2 point 5 sqmm x 3 point 5 core copper , supply 25 sqmm x 3 point 5 core alumunium , supply 35 sqmm x 3 point 5 core alumunium , sitc distribution box panel flp , sitc distribution box non flp having contactor and emergency shut down buttom , sitc distribution box llight panel flp , sitc distribution box panel light non flp , sitc dol starter 5 hp , sitc dol starter 2 hp , sitc dol starter 3 hp , sitc dol starter 10 hp , sitc flp dol starter 5 hp , cable glands non flp for 70 sqmm cable , cable glands non flp for 35 sqmm cable , cable glands non flp for 25 sqmm cable , cable glands non flp for 4 sqmm cable , cable glands non flp for 2 point 5 sqmm cable , cable glands non flp for 1 point 5 sqmm cable , cable glands flp double compression for 16 sqmm cable , cable glands flp double compression for 4 sqmm cable , cable glands flp double compression for 2 point 5 sqmm cable , cable glands flp double compression for 1 point 5 sqmm cable , cable laying and and as per detailed specification of tender attachments , cable glanding , connections, terminations , excavation for cable laying , sitc of well glass led lights 90 watts flameproof complete set with drivers etc , sitc of non flp normal under roof led lights 90 watts flameproof complete set with drivers etc , rubber mats 1 m wide , earrthing strips supply and laying 50 mm x 2 point 5 mm , earrthing strips supply and laying 25 mm x 2 point 5 mm , earthing pits , sitc street light pole , sitc flp street light , sitc flp juction box for light , sitc double arm for street light , civil foundation , foundation bolt set for light pole , cable route and joint markers , sitc flp emergency light 45 w , sitc non flp emgency light , sup point earthing cable 1c x 6 sqmm , sup point earthing cable 1c x 10 sqmm , ms structure steel , supply and lay b class gi pipe for cable protection , sitc 4 way junction box , cable tray 100mm x 50mm gi supply , cable tray 50mm x 25mm gi supply , cable clamps , flp blind plug 3 by 4 inch , preparation of earthpit and cable route drawing

CTN :45512315

22 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For solar street light , solar pole 15 feet height , clamp for light ms , cement , installation of lights and poles

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

State Government

CTN :45261962

15 Jun, 2026 38.95 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage and erection of 11kv by 400v transformer 250 kva , carriage and erection of 11kv by 400v transformer 63 kva , carriage and erection of 11kv by 400v transformer 25 kva , carriage and erection of transformer 11kv by 2 and half kv 16 kva single phase , carriage and erection of pcc pole 8 and half meter , carriage and erection of pcc pole 11 meter , carriage and erection of 11 kv v type steel cross arm , carriage and erection of 11 kv polymeric disc insulator t and c type 45 kn , carriage and erection of 11 kv disc fitting t and c type 45 kn , carriage and erection of 11 kv pin insulator polymeric , carriage and erection of 11 kv gi pin with nut bolt , carriage and erection of 11 kv tpmo with polymer insulator , carriage and erection of lt xlpe cable a1 3 and half into 400 sq mm , carriage and erection of lt xlpe cable 3 and half into 70 by 35 sq mm , carriage and erection of lt abc 3 into 95 plus 1 into 70 plus 1 into 16 sqmm , carriage and erection of lt abc 3 into 120 plus 1 into 95 plus 1 into 16 sqmm , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of lt distribution box single phase , carriage and erection of lt distribution box three phase , carriage and erection of plinth , carriage and erection of fencing , carriage and erection of water level earthing , supply and carriage and erection of dp holding clamps for top channel tpmo and fuse set etc with bolts nuts , supply and carriage and erection of stone pad , supply and carriage and erection of concreting of pole , supply and carriage and erection of concreating of stay , supply and carriage and erection of danger board , supply and carriage and erection of number plate , supply and carriage and erection of barbed wire ) /bid number : gem/2026/b/7554223 * /dated: 20-05-2026 & & / bid document 1 / 36 including jumper , supply and carriage and erection of henley type tailless unit protection cubical pannel 500 amp 650 v for 250 kva dt , supply and carriage and erection of copper l piece 50 into 225 into 10 mm ls , supply and carriage and erection of copper l piece 62 into 225 into 12 mm ls , supply and carriage and erection of a1 leg long barrel of size ls , supply and carriage and erection of ms channel dropper 100 into 50 into 2028 mm for fuse set , supply and carriage and erection of ms top channel 125 into 65 into 2240mm , supply and carriage and erection of ms channel 125 into 65 into 1300mm t off , supply and carriage and erection of 11 kv fuse set , supply and carriage and erection of lt pvc cable 4 into 16 sq mm , supply and carriage and erection of lt pvc cable 3 and half into 150 by 35 sq mm , supply and carriage and erection of lt fuse set 25 kva , supply and carriage and erection of ms angle 75 into 75 into 6 into 2028 mm , supply and carriage and erection of suspention clamp , supply and carriage and erection of dead end clamp , supply and carriage and erection of eye hook , supply and carriage and erection of j hook , supply and carriage and erection of clamp for distribution box , supply and carriage and erection of piercing connector , supply and carriage and erection of clamps for lt toff with nut and bolt , supply and carriage and erection of pg clamp , supply and carriage and erection of 11 kv v type steel cross arm clamp with nut and bolt , supply and carriage and erection of cross arm holding clamp with nut and bolt , supply and carriage and erection of f bracket for 11 kv , supply and carriage and erection of eye bolts for service cable , supply and carriage and erection of clamps for transformer 75 into 6 mm , supply and carriage and erection of chemical earthing complete

State Government

CTN :45238260

15 Jun, 2026 2.21 Lacs

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of carriage and erection of pcc pole 11 meter , carriage and erection of pcc pole 8 and half meter , carriage and erection of 11 kv v-type steel cross arm , carriage and erection of 11kv pin insulator polymeric type , carriage and erection of 11kv pin insulator , carriage and erection of 11 kv gi pin with nut and bolt , carriage and erection of acsr weasel conductor , carriage and erection of earthing of pole by ms earthing rod of 20 into 2500mm , carriage and erection of 11 kv stay set complete 16 into 1800 mm , carriage and erection of 11 kv disc insulator , carriage and erection of 11 kv disc insulator fitting , carriage and erection of 11 kv xlpe cable 3 into 120 sqmm , carriage and erection of 11 kv xlpe cable 3 into 185 sqmm , carriage and erection of 11 kv jointing kit 3 into 120 sqmm , carriage and erection of 11 kv jointing kit 3 into 185 sqmm outdoor , supply and carriage and erection cross arm holding clamp v type with nut and bolt , supply and carriage and erection 11 kv f bracket , supply and carriage and erection stone pad , supply and carriage and erection t off channel , supply and carriage and erection t off channel clamp , supply and carriage and erection concreting of pole , supply and carriage and erection danger board with clamp and nut bolt , supply and carriage and erection number plat with clamp

State Government

CTN :45413511

12 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay

Electrical Pole Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government