Latest electrical power station Tenders | Government electrical power station Tenders

CTN :40541098

21 Jun, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For custom bid for services - refurbishment of ships galley; design, supply, installation, commissioning and maintenance of grid connected roof top solar power plant service-1. supply and installation of kitchen cabinets sqft 275, 2. supply and installation of kitchen racks and baskets sqft 240, 3. supply and installation of cupboard with kitchen shelf inside sqft 240, 4. supply and installation of laminates sqft 475, 5. supply and installation of office table along with seating arrangement with wall decors job 01, 6. supply and installation of customized door size 8 x 3 feet job 07, 7. supply of air curtains nos 01, 8. supply and installation of working counter width 55"x height 34" nos 01, 9. renovation of service area along with storage provision and arrangement job 01, 10. provision for sliding door along with arrangement of plumbing for the wash area job 01, 11. provision of gas pipeline for the outdoor alongwith the fabrication works job 01, 12. arrangement of partition works along with sliding door job 01, 13. electrical works job 01.

CTN :40252745

10 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of lfh cable uniflex single core 1 sq.mm , teflon cable flu-tef single core 1 sq.mm , push button teknic 22.5 dia black(for reset) , cable gland size 6 , vibration eliminator for suction line , o ring star locating pin , main rotor , control transformer pri 0 to 415 v ac sec 0 to 230v ac 8a , vibration eliminator for liquid injection line , control transformer tape wound 415 v/110 v 150 va , set capacity regulator 24 v dc , set shut-off valve nw32 part no 08082 , setcrank shaft part no. 08056 , valve globe type 7/8inch ods , kit for power contactor for compressor stater , hrc fuse link ge ns4 4a with nh type fuse base , thermostatic exp. valve gfe-1.1/2jc charge 1/4inch x 1/2inch flare , hooter ems 0001016 24 v dc , set connecting rod part no. 08307 , set of bearing for 7.5 kw motor for 2x2.1 tr ref plant , vibration eliminator 1-3/8inch ods , evaporator pressure regulator sporlan ori(t)10 , aux contactor ge rl4 rd022td 2 no + 2nc coil -24v dc , mpcb ge 0 1.6a with 1no + 1nc contacts , valve angle type 1/4inch ntp(m) x 1/4inch flare , valve globe type 7/8inch ods , cooling fan , vibration eliminator 1-1/8inch ods , kit for power contactor for acu fan stater , power contactor ge 0 32a 415 v ac 3 pole , set oilsump heat 80w 220-240v part no.08425 , pres transmitter danfoss mbs 3100-2211-1ac04 range 0-16 bar , set of v belts , valve plate assembly part no 08436 , kit for power contactor for sw pump stater , vibration eliminator 7/8inch ods , thermostatic exp. valve gfe-1/2jc charge 1/4inch x 1/2inch flare , mcb ge 0 32a , valve globe type 1/2inch ods , valve three way type 1/4inch npt(m) x 1/4inch flare , set oil pump part no. 08044 , set of gaskets for condenser for 2 x 2.1 tr ref plant , vibration eliminator 5/8inch ods , set of bearing for 1.5 kw motor for 2x2.1 tr ref plant , set gaskets part no. 08072 , pres transmitter danfoss mbs 3100-2411-1ac04 range 0 -25 bar , temp transmitter mbt 5560-0000-0200-10-415 range - 50-150 c , set shaft seal part no. 08008 , coil for power contactor for compressor stater , safety valve 1/2inch npt(m) set pressure 12.5 kg/cm2 r134a , valve angle type 1/2inch ntp(m) x 1/2inch flare , bridge rectifer ems 0011132 25a , set piston dia 70 part no. 08035 , coil for power contactor for sw pump stater , coil for power contactor for acu fan stater , valve hand shut off type 1/4inch flare , set of push buttons (one of each type) for lcp , sea water pressure differential switch , ss needle valves 1/4inch , non return valve 3.5/8inch , fuses 1 amp 400v , compressor gauge , set of gasket ac-470 compr , gasket , crank shaft , lp-op cutout mp55r(r12-r22) , bolt hex head , three way valve 1/4inch , thermostatic expansion valve , oil filter , screw driver 10inch , pipewrench 10inch , temperature transducer , pressure transducer , ring end spanner set , angle valve 1/2inch , safety relief valve for condensor , compressore discharge pressure gauge , brg ball deep groove 55x90x18 , pump trailing (pompe pollard) type 100 pr.60.100 c.g.n. , element complete with o ring , hub clutch , spacer , gear output , key , key parallel , hose 1 1/4 bsp(f) , lock nut m 120x2 km24 , bearing spherical roller(skf24124/cc/w33) , pump assembly , gasket , o ring , temp switch , gasket , rubber bonded washer , washer plain steel , assly. union screw socket , main pump , gasket , ring piston outer , seal kit for filter assly , pressure switch xml a 0037 , heat exchanger , p.r.v , press gauge(lub) , gasket , plate lock , washer plain steel , o-ring viton 42.5x36.5x3xc , flexible gas charging line , steel foot rule 12inch , flaring tool kit , connector 1 8inch mpt x1/4inch sae , charging adopter 3 4inch fpt x 1 4inchsae , copper tube 1 4inchx 2mtr , connectors 1 4inch mpt x 1 4inch sae , indication lamp amber , set of push buttons (one of each type) for lcp , set of indication lamps (one of each type) for lcp , semi conductor fuses ge / feraaz 200a , 6.611 rd30-xx0315 , mc mccb ge 100a s 400a , with aux c

Central Government / Public Sector

CTN :40469059

03 Jun, 2025 NA

Digboi - Assam

Tender For providing of custom bid for services - drg324s008 major overhauling of frame iii gas turbine generator 1 at captive power plant of iocl aod digboi refinery

CTN :39038230

06 Jun, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

Central Government/Public Sector

CTN :40409791

16 Jun, 2025 NA

Multi City - Multi State

Tender For design, manufacture, supply, installation, testing, commissioning and proving of mig-mag invert er based welding machine with air cooled torch comprising of power source, wire feed unit, function panel as p er specification attached with the tender. the welding plant shall be constant potential type with function panel /control panel complete including burn back control, crater fill, wire feed speed control, gas control with gas sa ving device for mig-mag welding and constant current type for mma welding as per specification appended wit h tender. it shall also include installation and commissioning of related equipment, training of personnel in oper ation and maintenance of machine and supply of technical documentation. ]

Central Government And Public Sector

CTN :40343928

06 Jun, 2025 5.09 Lacs

Jodhpur - Rajasthan

Tender For tender for supply of shifting of pac units from jaisalmer to sardarpura and basni jodhpur - supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.63mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 0.80mm thick gss sheet etc complete as required. , supplying , installing , balancing and commissioning of fabricated at site gss sheet metal rectangular/ round ducting complete with neoprene rubber gaskets , elbows , splitter dampers , vanes , hangers , support as per approved drawing and specifications of 1.00mm thick gss sheet etc complete as required. , sitc of gi volume control damper complete with neoprene rubber gaskets , nuts , bolts , screws linkages , flanges etc. as per specifications etc complete as reqd.. , supplying & fixing of powder coated extruded aluminium return air grills with louvers but without volume control dampers complete as required. , sitc of 4x16 sqmm pvc insulated pvc sheathed aluminum conductor armoured cable on the existing ms tray /walls with saddles/pvc of cables with glands etc. as required , sitc of 3x2.5 sqmm pvc insulated pvc sheathed copper conductor armoured cable for control wiring on the existing ms tray / walls with saddles/pvc thread/cable tie , screws etc. i/c end termination of cables with glands etc as required. , sitc of 40mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 20mm upvc pipe for plumbing work for drainage requirement i/c reducer , elbows , tees , unions , bends , sockets , flanges etc. for making water line connection forvarious package units of system etc. complete as required. , sitc of 100mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating i/c horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc of 150mm width x 50mm x 1.6mm thickness size of perforated ms cable tray i/c fabricating , horizontal and vertical bends reducers tees , cross members and other accessories as reqd , and duly suspended from the ceiling with ms suspenders and including paint etc. as required. , sitc 25mmx5mm thick g.i. strip for loop earthing on cable tray wall etc complete as required , dismantling & removing the existing laid old power/control cables of booster fans , old package units , condenser units , heaters/pre-heaters system , humidification etc. complete by unscrewing/cutting from the related m.s. racks/tray as required , lowering down the same from different floor to ground floor & shifting the same to the place inside the exchange premises as directed by eng.-in-charge. , dismantling / removing the existing fitted old defective/working/ /worn out 05 nos.package a.c. units with related condensers & accessories like canvas connection , duct damper & place at out side ac plant room at same floor etc as directed by eng.-in-charge. , recovering the existing laid refrigerant piping of old defective/working / worn out hot gas & cold gas of different sizes complete by cutting/unscrewing /opening etc. fitted in between the package unit & condenser unit lowering down the same from different floor to ground floor and shifting the same to the place inside the exchange premises/keeping in safe custody as directed by eng.-in-charge. , dismantling the existing old ducts of pac

Electrical Power Station Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector