Latest electrical service Tenders | Government electrical service Tenders

Central Government/Public Sector

CTN :43296101

29 Dec, 2025 4.99 Lacs

Jalandhar - Punjab

Tender For providing and laying electrical service connection and installation of power points at bsf primary school at bsf campus jalandhar under ftr hq bsf pb

State Government

CTN :42743421

06 Jan, 2026 NA

Srisailam - Telangana

Tender For corrigendum : supply of electrical consumables required for electrical services sub division at slbhes, srisailam dam west, nagarkurnool (dist) - 509326, telangana

CTN :43305357

03 Jan, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For providing of custom bid for services - hiring of electrical service,custom bid for services - oil filtration of transformer oil,custom bid for services - transformer oil testing,custom bid for services - testing of relay,custom bid for services - testing insulation resisitance,custom bid for services - thermography testing of panel,custom bid for services - servicing of vcb,custom bid for services - testing of vcb bottle oisd-137,custom bid for services - testing of third harmonic la,custom bid for services - testing of transformer current&potential,custom bid for services - testing of transformer tan delta,custom bid for services - maintenance of air conditioner,custom bid for services - acb servicing,custom bid for services - gas charging f/air conditioner r410a,custom bid for services - checking and reapair of light

CTN :43288198

29 Dec, 2025 25.78 Lacs

Delhi - Delhi

Tender For maintenance of all electrical services at krishi vistar sadan at directorate of extension, pusa, new delhi. (sh: running operation & maintenance of specialized electrical & mechanical services)

CTN :43304259

29 Dec, 2025 NA

Delhi - Delhi

Tender For construction of new academic building g 5 green 5 star rating building at iari pusa new delhi sh-providing comprehensive consultancy for civil and electrical engineering planning of stilt 5 storied new academic building which including preparation of detailed estimate nit structural design and drawings all external and internal service design and drawings mep works design and drawings obtaining green rating from griha and obtaining local body occupation and completion certificate approval from concerned local authorities including other statutory body approval and submission of as built drawings of all civil and electrical services

CTN :43304374

30 Dec, 2025 29.55 Lacs

Chandigarh - Chandigarh

Tender For operation & maintenance of electrical services at bis building, sector 27, chandigarh (sh: providing services for operation & maintenance)

CTN :43298192

30 Dec, 2025 4.09 Lacs

Hisar - Haryana

Tender For construction of phc at village satrod (hisar) (pdg. balance electrical services only)

CTN :43185676

05 Jan, 2026 NA

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer- the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.warranty must be one year., electronic balance- the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. warranty must be one year., vaccum pump - the pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted withvacuum and filter cartridge., hot air oven- the inner chamber should be made of stainlesssteel and the outer chamber should be m.s powdercoated. the maximum capacity of the oven shouldbe 100 ml or more. the operational temperatureshould be between ambient to 250oc or more witha temperature accuracy of 1o c. pid based digitaltemperature control., double distillation unit- the unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil bath- the oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240oc (0.1oc increment) with a temperature stability of 1oc, water bath- the water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars., ph/ condutivity meter - operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range shouldbe in between 0.00 to 29.99 s/cm, uv cabinet- operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometer- application: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca 2+ :0-99.9 ppmli 2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required

Central Government/Public Sector

CTN :43250899

24 Dec, 2025 5.99 Lacs

Krishnanagar - West Bengal

Tender For improvement and upgradation of electrical service connection of bop banpur and kajibagan of 32 bn bsf under shq bsf krishnanagar

State Government

CTN :42756383

29 Dec, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : purchase of biomechanical equipments - nord board, it should be portable and should have 2 load cell sensors per unit with easy to attach hooks pivoting 360 degrees joint improving sensor accuracy it should have knee position indicator for replication of test position in each time. should have sample rate per sensor: upto 400hz, capacity per sensor: 100 kg/980-1000n safe over load per sensor: 150kg/1500n, max over load per sensor: 200kg/ 2000n, resolution: 1n and sensitivity: 22.0+/-mv/v. should have rechargeable battery & battery life should be100 active hours approx. should have working temperature range 5-40 c. (all weather proof) latest upgradable software should have both wired & wireless connectivity connectivity through usb (wired) bluetooth low energy (ble) for ipad & iphone i.e. (wireless connectivity) should provide 4 years warranty on hardware,should be provided with latest upgradable software and free software updates. should have software available in mobile & laptop (desktop) application with cloud analytics platform applications. should have ability to collect data both local i.e. laptop and on ios devices. local software:- for data collection & data analysis locally. cloud software:- for athlete data management and analysis. local (desktop /laptop) software should be compatible with windows 10 desktop applicationios 13 or later application (ipad & iphone). should have ability to collect data of over 10000 athletes or more to choose with simple name search / grouping them. cloud analytics platform for analysis. software (application) must give real time feedback of testing. license must be valid for 4years. cloud software: - should automatically sync all data collected on local mobile and laptop application when connected to internet.o should have a dashboard to see overview of organization s athletes data and different tiles(data indicators) to see athletes within and outside threshold zones. report section:- should have port section to able to compare different groups/athletes on longitudinal data. should have ability to compare same athlete s data over the period. athletes profile:- should have functionality to enter anthropometry (i.e. upper body & lower body measurement). athletes profile should be auto sync to local application and flexibility to move across different groups or teams with in organization and functionality to pick any athlete from large pool (1000 or more athlete). should be able to setup different access to different people i.e. to physiotherapist, sports scientist and s&c trainer within the organization to secure data access.api integration:- should have open-source api code for integration into athlete management system to integrate in ams system. should have software license valid for 4years. wi-fi tablet 64gb, space grey-1year warranty (as provided by oem) - service by customer service of oem only.hsn:8471.training for installation and demonstration shall be provided at olympian balbir singh senior international hockey stadium, sector- 63, mohali, punjab., electromyography (open), the system should be supplied with minimum 16 high speed wireless emg channel with built in imu sensor. should have analog+ digital base station should have analogy output option to facilitate integration with third party hardware and software sensor should have fixed inter sensor delay of 0.5 milliseconds or less sensors should have fixed spacing between electrodes preferably less than 15 mm to avoid motion artifacts and cross-talk sensor contacts should be made up of a metal for better contact and better-quality signal should be supplied with a charging/transmitting station that communicates with sensors to get information on their charging, recording and signal strength sensors, sensor skin interface, cable, power adapter and accessories sensors facilitate emg and imu measurements emg data analysis software for stand-alone usage with live recording of at least

Electrical Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government