Latest electrician knife Tenders | Government electrician knife Tenders

CTN :45533036

20 Jun, 2026 7.99 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground- development of ezhikkara grama panchayath ground in paravur lac, ernakulam district- supply and installation of open gym equipment - retender - inauguration stone and interlock laying for open gym area, od34726/2026-2027 providing and fixing 18 mm thick gang saw cut, mirror polished, pre-moulded and pre polished, machine cut for inauguration granite stone of required size, approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) joint treated with white cement, mixed with matching pigment, epoxy touchups including rubbing, curing etc. complete at all levels. area of slab over 0.50 sqm, 16.21 engraving letters in hard stone, od419846/2025-2026 providing and laying of interlock concrete block pavements having thickness 60mm (m35) as per drawings and technical specification clause 1504 confirming to is 15658 and laid in required colour and pattern over and including 50mm thick compacted bed of 6 mm metal including edge concreting for 300mm width and 150mm depth with cc m35( @ 0.045 m3/m), supply and installation of open gym equipment, od27550/2026-2027 chest press (double) - supply and installation of double chest press having the following specifications: dimensions: (l x w x h) 1955 x 710 x 1900 mm. main center pipe - ø 114 mm od ?b? class gi pipe. foundation plate ?m.s. round plate of ø 250mm & 8 mm thick. foundations cover cap- dome shape of pp / nylon / hdpe material. remaining frame - made up of ø 48 mm od ?b? class g.i. pipe. handle - made up of ø48mm od ?b? class g.i. pipe. link - made up of ø 48 mm od ?b? class g.i. pipe. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. bearing bush closing cap?s? pp / nylon / hdpe material. handle must be connected with frame by 8 mm laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brands. pin ? made up of ø 25 mm m.s. bright bar pin. bearing bushes - ø 60 mm od seamless pipe. grips - high quality rubber ø 46 mm od. circlips?a 24 circlips are used for assembly. coating - best quality of powder coating 80-120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od30940/2026-2027 surfboard - dimensions: (l x w x h) 1090 x 890 x 1390 mm. main frame made from two pipes of ø 114 mm od b class gi pipe. foundation plate m.s. round plate of ø 250 mm & 8 mm thick. connecting pipe - ø 88 mm od b class gi pipe is used to connect both main frame pipes at top end and ø 42 mm pipe is used to connect at bottom end. handle - ø 42 mm and ø 33 mm od b class gi pipe. support pipe ø 60 mm must be used to support leg movement frame. leg movement frame ø 42mm od b class gi pipe. footrest - cast iron 325 x 270 x 8 mm thick and m.s. plate of 250 x 200 x 2 mm thick use for to support it. bracket - 8mm thick laser profile is used to support leg movement frame. top closing cap dome shape made by pp / nylon / hdpe material. closing caps pp / nylon / hdpe material. foundation stool: made from main pipe ø 88 mm od m.s pipe and top support of m.s. round plate of ø 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. grips - high quality

State Government

CTN :45400712

20 Jun, 2026 3.00 Lacs

Amreli - Gujarat

Tender For corrigendum : supply of tools and tackles for technical staff of chital and lathi sdn under amreli division-1.-- continuity tester , wire cutter , pliar , insulation tap (lt) , insulation tap (ht) , lt digital electric pen , screw driver (x and flat) , crosspan hammer , handy rechargable , torch , needle nose pliar , insulated adjustable wrench , electrician knife with foldable design , multipurpose tool , punch , hacksaw small (with blade) , fix spanner set 5 no.s

State Government

CTN :45400713

20 Jun, 2026 3.00 Lacs

Amreli - Gujarat

Tender For corrigendum : supply of tools and tackles for technical staff of babra town and babra rural sdn under amreli division-1. continuity tester , wire cutter , pliar , insulation tap (lt) , insulation tap (ht) , lt digital electric pen , screw driver (x and flat) , crosspan hammer , handy rechargable , torch , needle nose pliar , insulated adjustable wrench , electrician knife with foldable design , multipurpose tool , punch , hacksaw small (with blade) , fix spanner set 5 no.s

State Government

CTN :45400714

20 Jun, 2026 3.00 Lacs

Amreli - Gujarat

Tender For corrigendum : supply of tools and tackles for technical staff of amreli rural-1 & 2 sdn under amreli division-1. continuity tester , wire cutter , pliar , insulation tap (lt) , insulation tap (ht) , lt digital electric pen , screw driver (x and flat) , crosspan hammer , handy rechargable , torch , needle nose pliar , insulated adjustable wrench , electrician knife with foldable design , multipurpose tool , punch , hacksaw small (with blade) , fix spanner set 5 no.s

State Government

CTN :45400716

20 Jun, 2026 3.00 Lacs

Amreli - Gujarat

Tender For corrigendum : supply of tools and tackles for technical staff of amreli town-1 & 2 sdn under amreli division-1. continuity tester , wire cutter , pliar , insulation tap (lt) , insulation tap (ht) , lt digital electric pen , screw driver (x and flat) , crosspan hammer , handy rechargable , torch , needle nose pliar , insulated adjustable wrench , electrician knife with foldable design , multipurpose tool , punch , hacksaw small (with blade) , fix spanner set 5 no.s

State Government

CTN :45400711

10 Jun, 2026 3.00 Lacs

Amreli - Gujarat

Tender For supply of tools and tackles for technical staff of damnagar sdn, liliya sdn, tms & lab staff under amreli division-1.- continuity tester , wire cutter , pliar , insulation tap (lt) , insulation tap (ht) , lt digital electric pen , screw driver (x and flat) , crosspan hammer , handy rechargable , torch , needle nose pliar , insulated adjustable wrench , electrician knife with foldable design , multipurpose tool , punch , hacksaw small (with blade) , fix spanner set 5 no.s

Central Government/Public Sector

CTN :45449054

20 Jun, 2026 40.00 Lacs

Kamrup - Assam

Tender For supply of combination pliers , screw driver , neon tester , electrician knife , hammer ball pin , file round , plier side cutting , plier round nose , plier flat nose , pliers long nose , hammer chisel , hammer ball peen , wall jumper octagonal mm , center punch , steel measuring tape , allen keys , spanner double ended set of g , adjustable spanner , steel rule , electric soldering iron , rubber gloves , multimeter , tong tester , megger , dc power supply , auto transformer variac , tweezers , crimping tools , common hacksaw , adjustable hacksaw , hand saw , dhau , round knife , tripura dhahu , foldable knife , multi purpose knife , common scissors , hand drill , electric hand drill , steel rule , folding scale , bamboo cross cutting machine heavy duty , bamboo portable crosscutting mc , bamboo radial splitting mc chain type , bamboo round stick making machine , bamboo stick polishing machine , bamboo slicing machine heavy duty , bamboo stick sizing machine , bamboo double side cutting machine, parallel splitter , bamboo four side planing machine , bamboo treatment plant , bamboo dying tank , bamboo knot removing machine , manual slivering machine , universal grinding machine , machine saw , machine planner , hand gloves , portable sanding machine , spray gun , dying chamber , resign applicator , glue mixing machine , spade , steel float , spirit level , chisel , bench vice , c. clamp , gloves canvas , grinding machine with various polishing stones , brush for painting , automatic weaving machine , gas torch , woodturning lathe , table grinding machine , industrial sewing machine , clamps for holding or tightening the jobs , manual ball press machine , sizing machine for window blinds , compressor , manual slivering machine , portable planner , mitre saw , universal planner , suitable work tables , tool cabinet , trainees locker with , storage rack

Central Government/Public Sector

CTN :45338871

22 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of rubbing plate for bolster suspension drawing no: emu/m-0-5-017 alt g/6, item no 2. spec. no : rdso spec no c - 8401. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

Central Government/Public Sector

CTN :45255001

02 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of rubbing plate for bolster suspension to icf drg no:emu/m-0-5-017 alt g/6 (column ii). material conforming to rdso specn:c-8401 for use in conventional motor coaches. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Electrician Knife Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors