Latest electricians Tenders | Government electricians Tenders

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

Central Government/Public Sector

CTN :45527421

03 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of hose clips worm drive size 12 mm , hose clips worm drive size 20 mm , hose clips worm drive size 25 mm , hose clips worm drive size 30 mm , hose clips worm drive size 40 mm , hose clips worm drive size 50 mm , hose clips worm drive size 60 mm , hose clips worm drive size 80 mm , hose clips worm drive size 100 mm , crow bar , wooden handle for hammer 1000 grams , hammer ball pein 800 grams , sledge hammer double face 3500 grams head , sledge hammer double face 6500 grams head , universal joint 0.5 inch d19 socket 1995 , wire nipper 150 mm , electrician screw driver size 150mm x5mm x0.8mm , screw driver insulated 150 x 8 x 1.2mm. , electrician screw driver size 200mm x 5.5mm x 0.8mm , electricians screw driver size 250 mm x 5.5 mm x 0.8 mm , screw driver insulated size 300mm x10mmx1.5mm , shovel with square nose nominal mass of blade 1.8 kg , binding wire gi 16 g as per is 4826 1979 , sealing wire 16 swg

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

State Government

CTN :45696341

29 Jun, 2026 2.06 Lacs

Chengannur - Kerala

Tender For p n n dev in sab gp monthly pooja in karkkadakam,chingam,kanni, thulam and onam festival in 1201 me 1202 me engaging electricians and mechanic grade i for day to day watch n maintaining elect installations machineries etc in pamba n nilackal

State Government

CTN :45696356

29 Jun, 2026 3.17 Lacs

Chengannur - Kerala

Tender For pnn devaswoms in sabarimala group engaging electricians for day to day watch and maintaining to the existing electrical installations n machineries installed in and around at off periods from 01 july 2026 to 31 oct 2026 in 1201n 1202 me

State Government

CTN :45696360

29 Jun, 2026 2.26 Lacs

Chengannur - Kerala

Tender For general sabarimala devaswom engaging electricians at sannidhanam during off periods from 01 july 2026 to 10th nov 2026

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

CTN :45648058

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of pneumatic torque wrench spec as per annexure a in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 single phase spec as per annexure b in atc of bid document , reciprocating air compressor electric motor driven 10.0 to 10.9 kg per cm2 three phase spec as per annexure c in atc of bid document , bench manual feed 20 mm capacity drilling machine bench type or pillar type spec as per annexure d in atc of bid document , cutoff wheel dia 105mm , rust remover solution 300 ml , m12 plain washer , emery sheet grit size 120 , emery sheet grit size 180 , ms welding electrode 4mm , soldering iron , 4 digit backlit hand held true rms clamp meter , hand held 100 khz digital multimeter , half inch chrome plated ratchet , insulated pliers , alloy steel center punch , line tester , round m 8 medium grip screwdrivers , round m 3 electricians screwdrivers , miniature screwdriver set , iec 60900 insulated wire stripper , stainless steel chrome universal bevel protector , plain electrical glove 11 kv , welder gloves or gauntlets type 3 , mild steel split or cotter pin 2.5 mm , mild steel split or cotter pin 3.2 mm , adhesive super joiner tubes or synthetic glue , welding helmet , pointer stick extendable , mild steel welding electrode 1.6 mm , e 17 covered electrode , e 19.9 l covered electrode , tool saw blades or hacksaw blades , rubber ht tape , plain washer type b m16 , plain washer type a m8 , plain washer type a m 6 , plain washer type a m 10 , aluminium oxide arbor flap wheel , enamel paint remover spray , lcd display calipers , dark glass for welders screen arc current 220 , single beam or pole manual na for vernier height guage , chipping strong hammer , heavy duty high conductivity earth clamp , stainless steel soldering clamp holder , digital level , cable lugs size 90 mm , cable lugs size 4 mm

CTN :45643043

13 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply of mdms software with licenses , hp central installation and storage server , data backup system , multi-protocol data interface boxes , data acquisition terminals - networking , multi- standard hardware interfaces , system and sensor monitoring hardware , marine-grade rugged enclosures , fiber optic cabling and connectors , core switches , distribution switches , access switches - data points , hardware interface , uninterruptible power supply - ups , network switches , system cables - cable assemblies - connect , installation materials and accessories , on board spares , documentation , service engineer , training

State Government

CTN :44196120

21 Jul, 2026 NA

Panchkula - Haryana

Tender For corrigendum : supply, installation and commissioning of cyber security solution including hardware, comprehensive warranty, licenses and premium support and onsite engineer for a period of 5 years

Electricians Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors