Web Analytics Made Easy - StatCounter

Electricity Cable Tenders

Get complete information related to latest Electricity Cable Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Electricity Cable Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Electricity Cable Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40885273 Due date: 21 Jul, 202521 Jul, 2025 NA
Tender For supply of shoulder arthroscopic trocar cannula disposable diameter 6 point5mm x length 70 mm sterile , all suture anchor soft anchor diameter 1 point4 mm all suture anchor with flexible drill and sleeve 0 12 25 deg , meniscus repair system all inside with flexible needle design sterile , suture lasso shuttle 45 degree left preloaded with no point 1 monofilament suture , meniscus repair system all inside menisceal repair system with preknotted two peek implants mounted on reverse curved rigid needle , guide wire for interference screw single use including calibration mark to assist screw placement point size approx 1 point2 mm x 200 mm , sterile disposable arthroscopic irrigation set with inflatable bulb bellows for irrgation , arthroscope autoclavable high definition 4 mm 30 deg 105 deg fov 140 mm length has much greater scratch resistance than conventional as per specification , arthroscopic suture grasper and retriever , femoral cortical suspension device titanium with self adjustable loop length knotless system as per specification , per loaded mini suture passer for knee with curvd self captuer mechanism disposable sterile , spiked staple 6 spike large sterile titanium sterile , surgical site isolation long u drape 180cm x 120 cm transparent polyethylene film waterproof conformable matte finish as per specification

Central Government/Public Sector

CTN :40875090 Due date: 18 Jul, 202518 Jul, 2025 6.20 Lacs
Tender For thermocouple, medium-temp furnace unit, mid temp, tga/tma suspension wire, qz, l-155/tga

CTN :40858579 Due date: 04 Jul, 202504 Jul, 2025 19.98 Lacs
Tender For 10/edc(s)/2025-26 - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted on all 04 corners and 01 side for gate.

CTN :40858581 Due date: 04 Jul, 202504 Jul, 2025 19.98 Lacs
Tender For runningcontractfordepositworksunderedd-lambhua,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

CTN :40858583 Due date: 04 Jul, 202504 Jul, 2025 19.98 Lacs
Tender For runningcontractfordepositworksunderedd-baldirai,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted

CTN :40858584 Due date: 04 Jul, 202504 Jul, 2025 19.98 Lacs
Tender For runningcontractfordepositworksunderedd-jaisinghpur,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grou

CTN :40858587 Due date: 04 Jul, 202504 Jul, 2025 24.69 Lacs
Tender For runningcontractfordepositworksunderedd,sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., guarding angle., guarding angle clamp., shackle insulator., distribution box 3 phase with clamp., stay loop insulator, bolts, nuts & washers all sizes., l.t. connector (pearcing)., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 11 mtr., safe carriage of pcc pole 8.5 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of 11 kv xlpe cable al. 3x120/3x70 sq.mm., safe carriage of lt xlpe cable abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp from site to pit point., dragging of pcc pole from site to pit point., fabrication & errection of single pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole 11 mtr support on stp including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of single pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., fabrication & errection of double pole support on pcc pole including digging of pit & fixing of all accessories and clamps as per respo norms., grouting of structure by digging od pit 1.83 mtr. deep for 11 mtr stp/8.5 mtr pcc pole foundation is provided with help of steel or wooden formers, groutung with 1:4:5 ratio cement, sand & first class brick ballast 0.285 cu mtr for 11 mtr stp/8.5 mtr pcc pole plinthing 0.3 mtr above g/l and proper plastering as per respo norms., earthing of 11 mtr stp/8.5 mtr pcc pole as per respo norms., stay complete., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc., digging of trench & laying of cable 11 kv xlpe cable 3x120/3x70 sq.mm including sands & brick., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x120/3x70 sq mm xlpe 11 kv cable (cost of all accessories will be borne by contractor) as per resspo norms., installation and fixing of heat shrinkable type 11 kv cable joiting kit 3x120/3x70 sq mm xlpe cable box as per norms., high pressure testing after completion of laying of 11 kv xlpe cable, fixing of joints & termination. (testing equipment shall be arranged by the contractor)., making cable jointing kit i/d & o/d 3x120/3x70 sq.mm., installation of meter qubical., installation of ct/pt combinud unit., route cable marker with size 3x1.5 feet stone for underground cable at every 100 mtr from initial point with notice "11 kv u/g line" painted on it (all the material, manpower and t&p will be arranged by the contractor at his own cost)., road restoration charges for pucca road crossing., road restoration charges for footpath side., laying stringing & sagging of lt xlpe cable abc 3x120+1x95+1x16/3x50+1x35+1x16/1x25+ 1x16 sq.mm., erection and mounting of 25 kva t/f., erection and mounting of 63 kva t/f., erection and mounting of 100 kva t/f., providing and installation of smc box for 25 kva to 100 kva., installation of 250/400 kva t/f on plinth., construction of plinth for 250/400 kva t/f including of all material as per respo norms., fencing work suitable of 250/400 kva t/f plinth of size 15x12x8 and angles of suitable size should be grouted on all 0

CTN :40218029 Due date: 27 Jun, 202527 Jun, 2025 NA
Tender For bid to ras bid to ras supply of piston pin with circlip lock std , piston ring set std , cylender linner std , main bearing set 20 , beg and bearing 20 , c r bush , valve inlet , valve exhaust , valve guide inlet , valve guide exhaust , valve seat inlet , valve seat exhaust , valve oil seal , thrust washer std , engine o h gaskit complete with head gaskit , oil jet with packing , oil pump , oil pump chain , timing oil seal , main oil seal rear , oil filter element , tensnor timing belt , water pump , thermo state valve , ball bearing crank shaft 6202 , temperature sending unit , oil sending unit , oil cooler , egr valve with lower pipe , cam shaft seal , cam tikki , alradide tube big size , fuel filter body complete with hand primer , hose pipe set , radiator cap , water resevoier tank , diesel pipe filter to pump , accelerator cable , thermo state rear hose pipe , air filter , heater plug glow plug , timing cover with lock , engine mounting lh rh , nozzle bypass pipe ste , anobond tube , clutch plate , pressure plate , release bearing , gear liver bush kit , fan belt , power steering belt , timing belt , km head assy , front right side 4x4 hub lock cover , wiper blade , head light both side , front indicator glass both side , tail light glass both side , door glass machine regulator , hand break wire , brake master cylinder , front disc pad brake , engine o h seal kit , clutch master cylinder , clutch sleev cylinder , piston set std maruti gypsy mpfi bs iv , piston pin with lock , thruste washer set std , oil pump mpfi bs iv , high tension lead , cylinder head gaskit , o ring spark plug , spark plug , timing belt tensioner , main bearing set 10 , beg end bearing set 10 , crank main oil seal , water pump set mpfi bs iv , cover assy clutch , disc clutch , belt water pump mpfi bs iv , relese bearing clutch , oil filter assy mpfi bs iv , thermostate valve , oil pressure switch assy , exhaust pipe packing seal , fule pump assy mpfi bs iv , injector assy fuel mpfi bs iv , cylinder linner std bs iv maruti gypsy , throttle body assy complet with idel speed motor mpfi bs iv , engine overhouling gaskit complet maruti gypsy mpfi bs iv , temprature sending unit maruti gypsy , accelerator cable matuyi gypsy , wipper blade , ignition coil , crank sensor , cam sensor , clutch cable , u j cross maruti gypsy , brake booster assy maruti gypsy , master cylinder assy maruti gypsy , front brake disc pad set maruti gypsy , rear brake shoes set maruti gypsy , ignitioin swtich assy maruti gypsy , rear wheel cylinder assy lh rh maruti gypsy , suspension bush kit compt , o ring rocker arm , fuel filter , fly wheel brg , throttle valve , air temp scencor , cam shaft oil seal , valve guide inlet and exhaust , inlet exhaust valve seal , king pin bearing , coolent rev tank , solonoide switch

CTN :40812375 Due date: 30 Jun, 202530 Jun, 2025 9.48 Lacs
Tender For material supply for construction of warehouse in bada gram panchayat in davangere taluk - bgd display board, bgd red oxide, bgd broken granite metal 10 mm, bgd broken granite metal 12.5 mm, bgd tools and plants and electrical charges at 2%, bgd hom of cutting and grinding machine, bgd add, bgd hom of welding and grinding machine, bgd corbon electrodes, bgd anchor bolts 750mm, bgd base plate / base plate, bgd gusset plates 6 mm thick, bgd ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre, bgd ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre, bgd unit cost as per the specification, formwork, centering & scaffolding for plastering & painting of new walls, bgd formwork, centering & scaffolding for beams & lintels of building, bgd formwork, centering & scaffolding for columns & piers, bgd add brush, putty, sand paper, roller at 5% on cost of paint, bgd plastic emulsion paint, bgd ms handles, bgd locking arrangments, bgd ball bearing for rolling shutters, bgd high tension coil, bgd suspension shaft, bgd side guides, bgd 18 gauge 75 mm ms laths of 2.8 m length, bgd add brush at 1% on cost of paint, bgd enamel metal paint, bgd add handling , loading and unloading at 2% on material, bgd add providing and removing scaffolding at 3% on labour, bgd painter class i, bgd ready mix primer paint (ready mix red lead paint), bgd welder grade i, bgd fitter class i, bgd ms flat, bgd m.s rods, bgd add hom of welding and grinding machine at 2% on material, bgd fabricator, bgd 5.50 mm thick plain glass, bgd cleat angles, bgd alluminium handles - 15 mm, bgd alluminium tower bolt - 20 cm, bgd pvc edge beading, bgd rubber beading for shutters beading, bgd aluminium window frame section 1.20 mm thick, bgd add handling , loading and unloading at 1% on material, bgd casurina poles 100 - 150 mm, bgd solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, bgd gravel 2.36 mm/murrum, bgd stone chistler class ii, bgd mason class ii (with tools), bgd mason class i (with tools), bgd mixer (concrete small used in culvert), bgd boulders, bgd bond stone 20 x 20 x 45 cm, bgd size stone 20 x 20 x 25 cms, bgd binding wire, bgd tmt bars fe 500, bgd hom of vibrator 0.71 days, bgd plasticizer / super plasticizer, bgd mixer (concrete) - 1 cum capacity, bgd portland cement, bgd broken stone aggregate 12 mm to 10 mm size, bgd broken stone aggregate 20 mm size, bgd add watering charges at 1 % on material, bgd coarse sand (zone iii), bgd granite/trap broken metal 100 mm and down size

Central Government/Public Sector

CTN :40809182 Due date: 30 Jun, 202530 Jun, 2025 NA
Tender For supply of overhauling kit for leveling valve for escorts make air spring suspension system consisting of 15 itemsas per annex. a suitable for demu rolling stock. annex. a consisting of 15 items. 01) valve head t o drg. no. 4eb6803 -2nos, 02)compression spring to drg no. 4a 35595 -01no. 3) wire mesh to drg no. 4kb 4708 -03nos 4)sealing ring to drg no. 4eb 6080 --1no. 5) o ring ( id: 8x2.5) cross section to drg no. 4eb 6 781 -1no. 6) washer 4b25989 -1no.7) compression spring to drg no. 4b 76130 -1no.8) e circlip washer 8x 0.8 din 6799-1no.9) washer forpiston drg no. 4 eb 6780-1no. 10) filter drg no. 4a 70275-1no. 11) sealing ring for filter screw to drg no. din 7603 --1 no. 12) sealing ring to drg no. 4eb 6785- 1no. 13) felt ring to drg no. 4eb 6799-1 no. 14) washer to drgno. 4eb 6783 -1 no. 15) circlip (32x1.2) to drg no. din 472 -1n o. make brand-escorts [ warranty period: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up