Latest electro mechanical equipment Tenders | Government electro mechanical equipment Tenders

State Government

CTN :45686591

03 Jul, 2026 NA

Serampore - West Bengal

Tender For supervision and preventive maintenance with checking of all electro-mechanical equipments at serampore mps under serampore municipality.

State Government

CTN :45228383

13 Jul, 2026 56.32 Lacs

Dumka - Jharkhand

Tender For corrigendum : operation and maintenance of 2x2 mw turbo generator sets and their auxiliaries, hydro mechanical and electro mechanical equipment inside and outside power house including 33 by 11 by 0.415 kv switchyard and allied housekeeping services at mhps dumka

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

CTN :45562806

27 Jun, 2026 8.79 Lacs

Katra - Jammu And Kashmir

Tender For corrigendum : operation watch and ward of departmental electro-mechanical equipment installed at lis kandyar in district reasi.

CTN :45674620

29 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For repair & maintenance of electro-mechanical equipments of raw water pumping plant of rural water supply scheme, pandra under d.w. & s. mechanical division, dhanbad

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

CTN :45659181

30 Jun, 2026 NA

Batote - Jammu And Kashmir

Tender For supply survey erection testing and commissioning for creation of 250 kva substation at arbal banihal for deep drilling bore well pump room electro mechanical equipment sump tank delivery tank pipe network and water filling station under ed jpdcl bato

CTN :45656438

01 Jul, 2026 36.30 Lacs

Kunigal - Karnataka

Tender For providing consultancy services for conducting topographical survey and preparation of dpr for the work scheme to lift water from kunigal doddakere to fill 39 tanks in kasaba & huliyurdurga hobli in kunigal taluk for drinking water purpose including conducting necessary survey, preparation of ls cs alignment/layout plans design of structural components electro-mechanical components and pipeline network after conducting necessary soil investigations and preparations of detailed project report consisting of detailed estimates designs survey maps and bid documents as per relevant indian standard codes and applicable rules including cost of men, equipment, vehicles, plotting/printing & supply of dpr design & drawings of required numbers of copies in required size till final approval of the dpr designs and drawing from the competent authority of the department. complete as per the directions of engeer-in-charge.

CTN :45450844

29 Jun, 2026 1.50 Crore

Anantnag - Jammu And Kashmir

Tender For corrigendum : augmentation up-gradation of electro-mechanical equipments along with allied civil works 62 kld fstp at uranhall anantnag - augmentation / up-gradation of electro-mechanical equipments along with allied civil works 62 kld fstp at uranhall anantnag (adv. cost of rs. 150.00 lacs)

CTN :45358642

26 Jun, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of azimuth indicator for bmpii onlyp156 , lv2icvs 251072040386367582 pannel control67582sb104 , lv2icvs gost5915701 nut m8.6.019 to die wse , k9bmpnbc lo2903sb clamp , z1 misc6758623 gasket , z7 rus765.56.105 gasket , lv2icvs gost1747380 screw m5x16.48.016 nfp vide p1302 , lv2icvs gost779870oh567. bolt 3m6.8gx12.46.019 , lv3icvs 5970720294345 washerst150351 , lv2icvs 4730002895922 sb14 piston , lv2icvs il620k screw nfp vide p1120799 , lv2icvs 5340720368156 7655 buffer , lv2icvs 7654955 frame , lv2icvs 5330127001631 gasket , lv2icvs 4720720260274 7650 hose , lv2icvs 5340720370047 730 shock absorber , lv2icvs gost174758045 screw b1m88gx14.48.019 nfp p1120702 , lv2icvs 533072023418476508 gasket , lv2icvs 5331720321384 7651 packing ring , lv3icvs 202779 plunger spring , lv3icvs 2001137 hinged bolt , lv2icvs 5330720365670 7654 gasketspecial , lv2icvs 5330720115367 7658 gasket , lv2icvs gost224670 wire 1.2 sb 08x2049g 7t , lv2icvs 5307720212602 go stud m6xt128gx48.66.019 , lv2icvs 424000029576594sb belt assy , lv2icvs gost2203876 20.88 stud m6xt126gx20.88 38xa , lv2icvs 5330720115467sb3346 seal plainsb334607nfp vide p1822876 , lv2icvs 5310236476ska293 washer copper plain 26 dia , lv2icvs 5330720115911 7651 packing material , lv2icvs gost220347616 stud m10x6t128g x 40.66.019nfp p2416 , lv2icvs 533072012824567550 packing material , lv2icvs 5330720129611 7650 packing material , lv2icvs 533072012961376506 packing material , lv2icvs 472000283240u61.3 hose , lv2icvs 5330019129 76506 gasket , lv2icvs 472000283540u121.3 hose ty005601680 , lv2icvs 47200029113t2015 hose , lv2icvs 472000283840u181.3 hose ty005601680 , lv2icvs 472000281240u900.1 hose , lv2icvs 472000280140u221.3 hose , lv2icvs 472000280440u301.3 hose , lv2icvs 472000280740u381.3 hose ty005601680 , lv2icvs 472000281040u481.3 hose , lv2icvs 472072015840576584 hose76584217 , lv3icvs sb2027004 fuel injection pump assy , lv2icvs ty1650591176oh4 conductor bpvl 1.0mm , lv2icvs 40u141.3 13 hose 14mm dia x5mm thk tu005601680 , lv2icvs 4710005144 pipe assembly , lv2icvs 40u180.77 hose 18mm dia x5 thknes ty005601680 , lv2icvs 40u320.771 hose sealing tu005601680 32mm diax 4. , lv2icvs 67508sb116 handle assy , lv2icvs 5310236475 ska292 washer copper plain 21 dia , lv3icvs ety 500 roller bearing 7042205 d1 , lv2icvs 67568sb117 frame , lv2icvs ost3403678ssg425 washer6 nfp vide p1120716 , lv2icvs 94220 gost 406060 nedle rdialroler brg outerring20x26x14 , lv2icvs 5330720116806 7655 gasket , lv2icvs 5945001714 76524 electro magnetic actuator , lv2icvs 67510sb2 ejector air cleaner , lv2icvs 53100178856723023 nutself lockinground , lv2icvs 5310720062754 go hexagon nut m10.6.019 , lv2icvs 533072011558176512 gasket76512251 , lv2icvs 5330720130848 m240 gasket , lv2icvs 533072013006176594 gasket , lv2icvs 7001327 end piece , lv2icvs 675599501 packing , lv2icvs 5945720085195 7651 relay assembly , lv2icvs 254000903767518sb seat , lv2icvs 669329 gasket , lv2icvs 399000013176568sb roller material handling , lv2icvs 536572017293776512 ring //bid details 2 / 137 retaining76512136 , lv2icvs 669339a adjusting screw , lv2icvs 383572031183767450 support tube pipe line , lv2icvs 473000704470037s lubricating nipple , lv2icvs 674593sb7516 mat , lv2icvs gost1747380 or gos scrwb1m58gx12.48.016orbm58gx12.66.016 , lv2icvs 5330021417765492 sealplain , lv2icvs 7651534 oil slinger right , lv2icvs 3110005309765159 ring bearing outer , lv2icvs 534072027131667455 torsion bar hinge , lv2icvs 302000275267564sb shaft of sprocket left hand , lv2icvs 5307720212612 go stud m66gx32.66.019 , lv2icvs 5340181293765151 stop mechanical , lv2icvs 534072024038667565 eye hook 67565sb248 , lv2icvs 5305720414437 gost screw b1m8x18gx18.48.019 , lv2icvs 594072047007674582 cover terminal box , lv2icvs 592072046957167458 fuse box , lv2icvs 302072015348267562 gear spur , lv2icvs 674582sb4061 pannel , lv2icvs 597572046958467458 panel electrical electronic equipment. , lv2icvs 304000342576515s gear shaft , lv2icvs 303072015354

Electro Mechanical Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government