Latest electrode rod Tenders | Government electrode rod Tenders

Central Government/Public Sector

CTN :40954965

16 Jul, 2025 76.0 Thousand

Dhanbad - Jharkhand

Tender For fabrication and welding of one no. tilt guard and tilt guard cover of dozer d355 slno.-p11843 and also repairing and machining of trunnion cap and trunnion ball r.h, lh and transmission guard repairing work at antst-jg ocp, lodna area, bccl.

CTN :40956320

25 Jul, 2025 20.00 Lacs

Multi City - Telangana

Tender For fabrication and welding works for belt conveyor structures, transfer chutes, surface crushers etc at srp-ocp, srp area on tonnage basis and as and when required basis for a period of 2 years as per the scope of work and terms and conditions of nit

CTN :40939709

23 Jul, 2025 1.50 Lacs

Leh - Jammu And Kashmir

Tender For supply of crank shaft lath work , nozzle repair , cyl head repair , self starter repair , governor welding work

CTN :40956465

04 Aug, 2025 NA

Multi City - Multi State

Tender For mechanical workshop- carrying out zone no. 9 b area mechanical workshop easttraversor & east side shops of east traverser- power maintenance shop, machine shop,heat treatment shop, smithy shop, carriage component shop, millwright shop, meetinghall near millwright shop, gas godown, pump no. 07, central park, wheel shop, welding shop, spring shop, bogie shop, shell shop, incoming shed, wtws section, masonry tank,e.t.p., general toilet no. 06, 07, 08, 09, 10 & wards, service building of store depot,r.p.f. post of store depot etc (expect sheds work) for maintenance of all civil engineering work. for p.e. 30.06.2026

CTN :40703337

07 Jul, 2025 NA

Pune - Maharashtra

Tender For corrigendum : supply of and clamping screw and rawel plug 5 mm , fly proof wire mesh steel wire dia 24 swg 15 m long 4 ft width , floor door stopper small , wooden ply cutting blade , fevicol sr 998 , araldite 180 gms , vinyl flooring sheet 1mm thickness , pbs roll 1.5 mm thick 01 mtr width 20 mtr length make shalimar , oil stone 6inch x 2inch x 1inch , glass cutter mechanical , tinted toilet window glass pan 6ft x 4ft x 3 mm , glass pan 6ft x 4ft x 4 mm , glass putty , looking mirror 2ft x 4ft aluminium beeding , looking mirror 2ft x 1.5ft aluminium beeding , ravel plug pvc 4mm or 6mm , door handle aluminium 4inch , haxsaw blade 0.50inch high speed 1ft long appx , haxsaw blade 1inchhigh speed 1ft long appx , m seal 100 gm , suction pump for clearing blockage bath or toilet 3inch dia , tower bolt aluminium 6inch , tower bolt aluminium 8inch , tower bolt aluminium 10inch , door closer helical , door closer hydraulic , sliding bolt 12inch , sliding bolt 8inch , handle consealed 4inch , handle folding 3inch , plastic bush 2 inch length and thick 12 mm , ss screw 0.50inch , ss screw 0.75inch , butt hinges ss0.75inch x 0.75inch x 3inch , tower bolt 4 inch , curtain socket one side 1 inch matki , ss handle 6inch , ss handle 4inch , mortec lock , auto cut hinges , furniture pvc edge band tape 0.75inch ivory 50 mtrs , furniture pvc edge band tape 0.75inch wooden 50 mtrs , sand paper , ceramic tiles 0.30 m x 0.30m x 6 mm , ceramic non skid tiles 0.30 m x 0.30m x 6 mm , vertified tiles 0.60 m x 0.60m x 8 mm , vetrified tiles 0.30 x 0.30x 6 mm thick white colour , wall tiles 0.45 x 0.30x 8 mm thick white colour , wall clading tiles 240mm x 60mm x 9mm d colour , j hook 6inch half threaded with nut and washers 8 mm , dr fix it , fevicol sh for wood work , dha iron appx weight of 01 kg , spade appx 1 kg wt , showel with handle make tata or eqvt appx 1 kg wt , pick axe appx 2.50 to 3 kg wt , crow bar 5ft long , tasla 24inch pan mortar plastic appx 18inch to 24inch dia , plumb bob , mason thread plastic , spirit level size 12inch , stabila spirit level type 70 mm or equivalent , mason hammer 1 kg mbt riveting hammer head , mason hammer 1.5 kg , mason trovel small size , mason trovel iron big size , water level pipe 8 mm dia , 3 m cate eye indicator , road sign boards , right angle 12inch , cutting wheel 4inch dia for angle grinder , multipurpose non slip rubber reusable gardening dishwashing scrubbing cleaning gloves size 9 inch , construction black safety gumboots black size 9 , psh 02 rachet type safety helmet with nape strap white colour , psh 02 rachet type safety helmet with nape strap yellow colour , safet jackets white , safet jackets yellow , demolition hammer 5 kgs 1500w , marbel moulding grinder 4 inch dw801 850 w angle grinder , dustless chalks white 100 no per pkt , tile cutting blade , carbon bush for tile cutting machine , tile cutting machine gdc 120 mm professional , ms square pipe 70mm x 70mmx2.6mm th 6mtr length , ms square pipe 50mm x 50mmx2.6mm th 6mtr length , ms square pipe 20mm x 20mmx2.6mm th 6mtr length , ms pipe 40 mm dia 6 mtr length , ms pipe 50 mm dia 6 mtr length , ms angle 50mm x 50mm x 5mm , agnle iron d size , ms flat 1inch x 3mm x 10 mtr length , cast iron weldind road of size 200 , ms arc welding electrode e6013 2.5 mm dia , ms arc welding electrode e 6013 3.15 mm dia , arc welding hand shield screen , arc welding heavy duty copper cable 600 amp 70 sqm , arc welding black glass 11 a1 din , protection glass for arc welding white glass , chipping hammer , tongs 1ft 6inch size , grinding goggles white , hand safe syn 021 welding safety goggles , esab buddy arc 200 inverter //bid details 2 / 98 welding machine , hand gloves , heavy duty arc welding holder 600 amp , heavy duty arc welding earth clamp , angular grinder 800 amps , 355 mm metal cut off grinder , metal cutting blade size 355 x 2.8 x 25.4 mm , welding helmet auto darkening , welding helmet normal , transparent polycarbonate corrugated sheet 10 ft

CTN :40936353

12 Jul, 2025 3.26 Lacs

Bokaro - Jharkhand

Tender For following repairing is to be done in d/61066 and d/60881. - name of work, repairing of carrier roller, track chain cutting fitting, steel tube rep. and frame welding workrepairing of differential link arm with replacement of spherical bushing, making pin 6 nos., bearing place bore welding and making bush fitting with material depositing., repairing of steering cylinder (lhs & rhs) and bend and damaged tie rod assembly., total impact of gst for the purpose of ctc

CTN :40936332

14 Jul, 2025 53.72 Lacs

Berhampur - Odisha

Tender For supplying all labour, material and t&p for laying of pipe lines, supplying & fiting of sluice valves, construction of valve chamber, providing fhtc in connection with pws to tumbagada, andanda & sapuakhata under patrapur block. - annexure - a, laying of pipe lines, fiting of sluice valves construction of valve chamber providing fhtc in connection with pws to tumbagada, supplying all labour and t&p for earth work in all kinds of soil within 50 m initial lead and 1.5 m initial lift including rough dressing and leveling etc., in foundation and plinth as per direction of engineer in-charge., supplying all material, labour , t&p for laying of following od hdpepipes conforming to is 4984-2016 and specials of the following outside diameter and class-4 to class-5 and jointing by fusion welding method including testing etc. all complete as per direction of engineer-in-charge, 160mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 110mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, 90mm dia o.d. hdpe. pipe (including pipe cost) pe100, pn-06, supplying all labour, t&p for filling in pipe line trenches with excavated materials including watering etc., all complete including proper care to the laid pipe lines to prevent damages of pipes and specials as per the direction of engineer-in-charge., supplying all labour, materials, and t&p for drilling perfectly horizontal bore of required dia so as to accommodate following size hdpe. pipe line into the hole including inserting the pipe with out disrupting the traffic or cutting road including jointing with water main pipe lines etc, (excluding cost of pvc pipe) and as per the direction of engineer-in-charge, 160 mm dia hdpe pipe, supplying all labour and t&p for cutting cement concrete road for taking pipe line etc., complete and as per direction of engineer-in-charge., supplying all materials, labour t&p for making good to the damages of cutting of cement concrete road for taking pipe line and with 40 mm size crusher broken metal concrete etc., cc (1:4:8) of thickness 0.10 mtr and top 12 mm size crusher broken chip;s concrete cc(1:2:4) of thickness 0.075 mtrs including all cost, conveyance, royality of materials including watering, curing and ramming etc., all complete and as per specification and direction of engineer-in-charge, supplying all materials, labour and t&p for fixing of following sizes of c.i. sluice / non return valves with double flanged ends for water works purpose for following nominal diameter including cost of nuts and bolts, rubber insertion as per specification etc., complete., 150 mm dia c.i s.v, 150 mm dia c.i n.r.v, 100 mm dia c.i s.v, 80 mm dia c.i s.v, supplying all materials, labour and t&p for fixing of 15mm to 25 mm dia single air valve including fitting of required pvc service saddle for water works purpose for following diameter, including drilling the water main as per specification etc., complete., supplying all materials, labour, t&p for construction of brick masonry sluice valve and non return valve chambers of internal size 90x90x120cm with all lead royalty etc. such as earth work excavation, bed concrete with c.c. (1:4:8), kb brick in c.m. (1:6), 12mm cement plaster with c.m. (1:4), rcc cover slab with cc 1:2:4 etc., and as per approved p.h. drawing and design etc., complete and direction of engineer-in-charge., supplying all materials, labour and t&p for fabricating, fitting and fixing with specials at the required site using hot dip galvanized pipes of medium class and standard weight of reputed make (tata / zindal make) confirming to is 1239(p.1)2004/is:1161 of the following dia including cutting the pipes and flanges drilling the bolt holes matching the pipes flanges and jointing with proper gradient and alignment, welding with using electrodes, fitting, fixing using mobile diesel generator set etc., complete as per direction of engineer-in-charge to be used to cross drainage work incl

CTN :40940965

09 Jul, 2025 2.15 Lacs

Aurangabad-Mh - Maharashtra

Tender For repair of various items at ambikanagar library ward 82 - removing the existing cernent plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc.complete.note: following items to be executed after prior approval of superintending engineer., providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete., providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on bothsides, and finishing with french polish etc. complete., providing and fixing in position. (as per 1.5 * 0.1868 / 1982 ) aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 * 38.1 * 1.02 mm at weight 0.547 kg/rmt. and window frame bottom track section 61.85 * 31.75 * 1.2r at weight 0.695 kg/rmt. top and side track section 51.85 * 31.75 * 1.3 mm at weight 0.659 kg/rmt. the shutter should be of bearing bottom 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 * 18 * 1.1 mm at weight 0.469 kg/rmt. and handle section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. and top section 40 * 18 * 1.25 mm at weight 0.417 kg/rmt. as per detailed drawings and as directed by engineer in charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour anodising with box., providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete., dismantling the r.c.c. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., providing and laying cast in situ/ready mix cement concrete m-20 of trap/granite/quartzite/gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, providing and fixing in position tmt - fe-500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete., providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand face

CTN :40948931

21 Jul, 2025 NA

Mahuva - Gujarat

Tender For rate contract for motor rewinding work , water pipeline welding and leath work , deepwell material supply , etc.

Corporations And Associations And Others

CTN :40927240

17 Jul, 2025 4.97 Lacs

Panipat - Haryana

Tender For overhauling / servicing / replacement of various valves and welding works of 210 mw, unit-6, ptps, panipat during its overhauing as per scope of work file no. 6099

Electrode Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others